About Perforated Sheets
More
Aluminum Perforated Sheets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/923/9232t181-@halfx_637338661401190819.png?ver=imagenotfound)
Aluminum is lightweight. These sheets have good corrosion resistance, weldability, and formability.
Grade 3003 aluminum is softer than Grade 5052, so it has better formability. With a good combination of formability, weldability, and strength, it’s often used for filters, fuel tanks, and general sheet metal work.
Grade 5052 aluminum is more corrosion resistant than Grade 3003, and is good for use in saltwater environments. It’s also harder and stronger for greater wear resistance. It’s often used in storage tanks, pressure vessels, and marine applications.
For technical drawings and 3-D models, click on a part number.
24" × 24" | 36" × 40" | 48" × 48" | ||||||
---|---|---|---|---|---|---|---|---|
Hole Dia. | Open Area | Hole Center-to-Center | Each | Each | Each | |||
3003 Aluminum Sheets—Staggered Holes | ||||||||
0.032" Thick. (20 Gauge) | ||||||||
0.0625" | 23% | 0.125" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 0000000 |
0.0625" | 30% | 0.109" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.125" | 40% | 0.188" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.1875" | 51% | 0.25" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.25" | 40% | 0.375" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.25" | 58% | 0.313" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.05" Thick. (16 Gauge) | ||||||||
0.0625" | 23% | 0.125" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.0625" | 30% | 0.109" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.125" | 40% | 0.188" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.1875" | 51% | 0.25" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.25" | 40% | 0.375" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.25" | 58% | 0.313" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.063" Thick. (14 Gauge) | ||||||||
0.125" | 40% | 0.188" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.1875" | 51% | 0.25" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.25" | 40% | 0.375" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
0.25" | 58% | 0.313" | 00000000 | 00000 | 000000 | 00 | 00000000 | 000000 |
0.125" Thick. (8 Gauge) | ||||||||
0.125" | 40% | 0.188" | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 000000 |
0.1875" | 51% | 0.25" | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 000000 |
0.25" | 40% | 0.375" | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 000000 |
0.25" | 58% | 0.313" | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 000000 |
5052 Aluminum Sheets—Staggered Holes | ||||||||
0.032" Thick. (20 Gauge) | ||||||||
0.0625" | 23% | 0.125" | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
0.0625" | 30% | 0.109" | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
0.125" | 40% | 0.188" | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
0.25" | 58% | 0.313" | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
0.05" Thick. (16 Gauge) | ||||||||
0.0625" | 23% | 0.125" | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
0.0625" | 30% | 0.109" | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
0.125" | 40% | 0.188" | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
0.1875" | 51% | 0.25" | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
0.25" | 58% | 0.313" | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
0.063" Thick. (14 Gauge) | ||||||||
0.125" | 40% | 0.188" | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
0.1875" | 51% | 0.25" | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
0.25" | 40% | 0.375" | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
0.25" | 58% | 0.313" | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
0.125" Thick. (8 Gauge) | ||||||||
0.125" | 40% | 0.188" | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
0.1875" | 51% | 0.25" | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
0.25" | 40% | 0.375" | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
0.25" | 58% | 0.313" | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
High-Flow Aluminum Perforated Sheets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/927/92725t22-@halfx_637338663149119457.png?ver=imagenotfound)
Hexagonal holes provide a large open area for high-flow applications. Aluminum is lightweight and has good corrosion resistance, weldability, and formability.
For technical drawings and 3-D models, click on a part number.
Hole Dia. | Open Area | Hole Center-to-Center | Material | Each | |
24" × 24" | |||||
---|---|---|---|---|---|
Staggered Holes | |||||
0.032" Thick. (20 Gauge) | |||||
0.25" | 79% | 0.281" | 3003 Aluminum | 00000000 | 000000 |
0.05" Thick. (16 Gauge) | |||||
0.25" | 79% | 0.281" | 3003 Aluminum | 00000000 | 00000 |
0.063" Thick. (14 Gauge) | |||||
0.25" | 79% | 0.281" | 3003 Aluminum | 00000000 | 00000 |
36" × 40" | |||||
Staggered Holes | |||||
0.032" Thick. (20 Gauge) | |||||
0.25" | 79% | 0.281" | 3003 Aluminum | 00000000 | 00000 |
0.063" Thick. (14 Gauge) | |||||
0.25" | 79% | 0.281" | 3003 Aluminum | 00000000 | 00000 |
48" × 48" | |||||
Staggered Holes | |||||
0.032" Thick. (20 Gauge) | |||||
0.25" | 79% | 0.281" | 3003 Aluminum | 00000000 | 000000 |
0.05" Thick. (16 Gauge) | |||||
0.25" | 79% | 0.281" | 3003 Aluminum | 00000000 | 000000 |
0.063" Thick. (14 Gauge) | |||||
0.25" | 79% | 0.281" | 3003 Aluminum | 00000000 | 000000 |
High-Strength Aluminum Perforated Sheets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/966/9667t3-@halfx_637338662549396413.png?ver=imagenotfound)
Harder and stronger than our other aluminum perforated sheets, these lightweight sheets have greater wear resistance. They have good corrosion resistance, weldability, and formability.
For technical drawings and 3-D models, click on a part number.
36" × 40" | |||||
---|---|---|---|---|---|
Hole Dia. | Open Area | Hole Center-to-Center | Material | Each | |
Staggered Holes | |||||
0.032" Thick. (20 Gauge) | |||||
0.125" | 40% | 0.188" | 6061 Aluminum | 000000 | 0000000 |
0.1875" | 51% | 0.25" | 6061 Aluminum | 000000 | 000000 |
0.05" Thick. (16 Gauge) | |||||
0.125" | 40% | 0.188" | 6061 Aluminum | 000000 | 000000 |
0.1875" | 51% | 0.25" | 6061 Aluminum | 000000 | 000000 |
0.063" Thick. (14 Gauge) | |||||
0.125" | 40% | 0.188" | 6061 Aluminum | 000000 | 000000 |
0.1875" | 51% | 0.25" | 6061 Aluminum | 000000 | 000000 |
0.25" | 40% | 0.375" | 6061 Aluminum | 000000 | 000000 |
0.25" | 58% | 0.313" | 6061 Aluminum | 000000 | 000000 |
Metal Panels
Close off openings in structures while allowing air to pass through.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/dec/decorative-sheet-cane-medium-j01-@halfx_637290275321142193.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/dec/decorative-sheet-diamond-medium-j01-@halfx_637290274470468242.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/dec/decorative-sheet-weave-medium-j01-@halfx_637290279475025412.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/dec/decorative-sheet-oval-medium-j01-p1-@halfx_637290248651193026.png?ver=imagenotfound)
Perforated panels are for use in decorative applications. They can be cut, formed, and welded.
3003 aluminum is easier to form than 1100 aluminum. It's about half the weight of steel and resists corrosion in wet environments.
Overall | Opening | 36" × 40" | 36" × 60" | |||||||
---|---|---|---|---|---|---|---|---|---|---|
Opening Pattern | Thick. | Wd. Tolerance | Lg. Tolerance | Wd. | Lg. | Open Area | Each | Each | ||
3003 Aluminum | ||||||||||
Circle | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 44% | 0000000 | 0000000 | 0000000 | 0000000 |
Diamond | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.5" | 64% | 0000000 | 000000 | 0000000 | 000000 |
Oval | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.75" | 66% | 0000000 | 00000 | 0000000 | 000000 |
Weave | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 53% | 0000000 | 00000 | 0000000 | 000000 |