Wide-Mouth Trigger-Release Snaps with Eye
Trigger-Release Snaps with Eye
Squeeze the trigger to quickly release the latch.
For technical drawings and 3-D models, click on a part number.
Safety Trigger-Release Snaps with Eye
For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.
| Capacity, lbs. | Snap Opening Wd. | Usable Lg. | Eye Inside Wd. | Latch Type | Locking Latch Type | Each | |
Alloy Steel | |||||||
|---|---|---|---|---|---|---|---|
| 1,000 | 5/8" | 5" | 1" | Locking | Trigger | 0000000 | 000000 |
Snaps with Trigger-Release Latches on Both Ends
Warning: Test all assemblies for required strength before use.
| Capacity, lbs. | Snap Opening Wd. | Usable Lg. | Eye Inside Wd. | Latch Type | Locking Latch Type | Each | |
Alloy Steel | |||||||
|---|---|---|---|---|---|---|---|
| 1,000 | 5/8" | 8 1/2" | 1" | Locking | Trigger | 0000000 | 000000 |
Heat-Resistant Shock-Absorbing Fall-Arrest Lanyards
Made of steel, these durable lanyards hold up in abrasive and high-heat applications. For adequate fall clearance, you must have at least 20 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyard attaches to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 10 | 310 | Steel | Wire Rope | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.13 | 000000 | 0000000 |
Dual Leg | ||||||||||||
| 6 | 10 | 310 | Steel | Wire Rope | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.13 | 000000 | 000000 |
Shock-Absorbing Fall-Arrest Lanyards
|  Single Leg |  Dual Leg |
|
For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Polyester/elastomer lanyards expand and contract with your movements.
Dual-leg lanyards attach to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
| 6 | 9 1/2 | 420 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | __ | 000000 | 000000 |
| 6 | 10 | 310 | Polyester/Elastomer | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
| 4 to 6 ft. | 10 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 00000 |
Dual Leg | ||||||||||||
| 6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
Electrical Arc Flash-Resistant Shock-Absorbing Fall-Arrest Lanyards
| Single Leg | Dual Leg |
|
Made of Kevlar, these lanyards meet ASTM F887 when used with an arc flash-resistant harness. For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyard attaches to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 10 | 310 | Kevlar | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1, ASTM F887 | 000000 | 0000000 |
Dual Leg | ||||||||||||
| 6 | 10 | 310 | Kevlar | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.1, ASTM F887 | 000000 | 000000 |
Heat-Resistant Shock-Absorbing Fall-Arrest Lanyards with Anchor Point
Made of steel, these durable lanyards hold up in abrasive and high-heat applications. Attach the large snap hook directly to a rated structure such as a scaffold or pipe to create an anchor point. For adequate fall clearance, you must have at least 20 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Hook-Over Single Leg | ||||||||||||
| 6 | 10 | 310 | Steel | Wire Rope | Snap Hook | Steel | Snap Hook | Steel | 3/4", 2 1/2" | ANSI Z359.13 | 000000 | 0000000 |
Electrical Arc Flash-Resistant Shock-Absorbing
Fall-Arrest Lanyards with Anchor Point
Made of Kevlar, these lanyards meet ASTM F887 when used with an arc flash-resistant harness. Wrap the lanyard around a rated structure such as an I-beam and then attach it to itself to create an anchor point. For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Wraparound Single Leg | ||||||||||||
| 6 | 10 | 310 | Kevlar | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1, ASTM F887 | 000000 | 0000000 |
Shock-Absorbing Fall-Arrest Lanyards with Anchor Point
For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Hook-over lanyards have a large snap hook that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.
Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.
Harness End Connection | Anchor End Connection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Carabiner Opening Width | Specifications Met | Each | |
Hook Over Single Leg | |||||||||||||
| 6 | 9 1/2 | 310 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 2 1/2" | __ | ANSI Z359.13 | 00000000 | 0000000 |
| 6 | 10 | 310 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 2 1/2" | __ | ANSI Z359.13 | 00000000 | 000000 |
Wraparound Single Leg | |||||||||||||
| 6 | 9 1/2 | 310 | Polyester | Webbing | Snap Hook | Steel | Carabiner | Steel | __ | 13/16" | ANSI Z359.13 | 00000000 | 000000 |
Quick-Stop Fall-Arrest Lanyards with Anchor Point
These lanyards form their own anchor point by attaching directly to a rated structure. A quick-stop lanyard will stop your fall within a few inches. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Hook-over lanyard has a large snap hook that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.
Wraparound lanyard loops around a rated structure such as an I-beam and then attaches to itself to create an anchor point.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Specifications Met | Each | |
Hook Over Single Leg | ||||||||||||
| 6 | 310 | Polyester | Webbing | Carabiner | Steel | Snap Hook | Steel | 2 1/2" | Plastic | ANSI Z359.14 | 0000000 | 0000000 |
Wraparound Single Leg | ||||||||||||
| 9 | 310 | UHMW Polyethylene | Webbing | Carabiner | Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 00000000 | 000000 |
Quick-Stop Fall-Arrest Lanyards
A quick-stop lanyard will stop your fall within a few inches. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyard attaches to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 310 | Polyester | Webbing | Snap Hook | Steel | Carabiner | Steel | __ | Plastic | ANSI Z359.14 | 0000000 | 0000000 |
| 9 | 310 | Polyester | Webbing | Carabiner | Steel | Snap Hook | Steel | 1" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
| 11 | 310 | Polyester | Webbing | Shackle | Steel | Carabiner | Steel | __ | Plastic | ANSI Z359.14 | 0000000 | 000000 |
| 20 | 420 | Nylon | Webbing | Swivel Eye | Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
| 25 | 310 | Stainless Steel | Wire Rope | Carabiner | Stainless Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
| 50 | 420 | Stainless Steel | Wire Rope | Swivel Eye | Stainless Steel | Snap Hook | Stainless Steel | 3/4" | Aluminum, Stainless Steel | ANSI Z359.14 | 0000000 | 00000000 |
Dual Leg | ||||||||||||
| 6 | 310 | UHMW Polyethylene | Webbing | Pin Retainer | Steel | Snap Hook/Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |