About Plastic
More
Electrical-Insulating Ultem PEI Sheets and Bars
![](/prerenderstable/mvPRE/contents/gfx/imagecache/868/8685k521p2-j03-digital@halfx_637005935342120492.png?ver=imagenotfound)
Often used for circuit-breaker housings, manifolds, and semiconductor components, these sheets and bars offer excellent electrical-insulating properties.
For technical drawings and 3-D models, click on a part number.
- Color: Semi-Clear Amber
- Temperature Range: -20° to 335° F
- Tensile Strength: 17,000-17,500 psi (Excellent)
- Impact Strength: 0.5-0.6 ft.-lbs./in. (Poor)
- Hardness: Rockwell R111-R125 (Extra Hard)
- For Use Outdoors: No
- Specifications Met:
0.04": ASTM D5205, ASTM D7293, FDA Compliant 21 CFR 177.1595, NSF/ANSI 51, UL 94 VTM-0
1/16" to 1/8": ASTM D5205, FDA Compliant 21 CFR 177.1595, NSF/ANSI 51, UL 94 V-0
1/4" to 1": ASTM D5205, ASTM D7293, FDA Compliant 21 CFR 177.1595, UL 94 V-0, USP Class VI
Thick. | Thick. Tolerance | Surface Resistivity | Each | |
6" × 6" | ||||
---|---|---|---|---|
1/4" | 0" to 0.025" | 1013 ohms/sq. | 0000000 | 000000 |
3/8" | 0" to 0.025" | 1013 ohms/sq. | 0000000 | 00000 |
1/2" | 0" to 0.025" | 1013 ohms/sq. | 0000000 | 00000 |
3/4" | 0" to 0.025" | 1013 ohms/sq. | 0000000 | 000000 |
1" | 0" to 0.025" | 1013 ohms/sq. | 0000000 | 000000 |
12" × 12" | ||||
0.04" | -0.004" to 0.004" | 1013 ohms/sq. | 0000000 | 00000 |
1/16" | -0.00625" to 0.00625" | 1013 ohms/sq. | 0000000 | 00000 |
3/32" | -0.00938" to 0.00938" | 1013 ohms/sq. | 0000000 | 00000 |
1/8" | -0.0125" to 0.0125" | 1013 ohms/sq. | 0000000 | 00000 |
1/4" | 0" to 0.025" | 1013 ohms/sq. | 00000000 | 000000 |
3/8" | 0" to 0.025" | 1013 ohms/sq. | 00000000 | 000000 |
1/2" | 0" to 0.025" | 1013 ohms/sq. | 00000000 | 000000 |
3/4" | 0" to 0.025" | 1013 ohms/sq. | 0000000 | 000000 |
1" | 0" to 0.025" | 1013 ohms/sq. | 00000000 | 000000 |
12" × 24" | ||||
0.04" | -0.004" to 0.004" | 1013 ohms/sq. | 0000000 | 00000 |
1/16" | -0.00625" to 0.00625" | 1013 ohms/sq. | 0000000 | 00000 |
3/32" | -0.00938" to 0.00938" | 1013 ohms/sq. | 0000000 | 000000 |
1/8" | -0.0125" to 0.0125" | 1013 ohms/sq. | 0000000 | 000000 |
1/4" | 0" to 0.025" | 1013 ohms/sq. | 00000000 | 000000 |
3/8" | 0" to 0.025" | 1013 ohms/sq. | 00000000 | 000000 |
1/2" | 0" to 0.025" | 1013 ohms/sq. | 00000000 | 000000 |
3/4" | 0" to 0.025" | 1013 ohms/sq. | 0000000 | 000000 |
1" | 0" to 0.025" | 1013 ohms/sq. | 00000000 | 000000 |
- Color: Semi-Clear Amber
- Temperature Range: -20° F to 335° F
- Tensile Strength: 17,000-17,500 psi (Excellent)
- Impact Strength: 0.5-0.6 ft.-lbs./in. (Poor)
- Hardness: Rockwell R111-R125 (Extra Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D5205, ASTM D7293, FDA Compliant 21 CFR 177.1595, UL 94 V-0, USP Class VI
Wd. | Lg. | Surface Resistivity | Each | |
1/4" Thick. (0" to 0.03") | ||||
---|---|---|---|---|
2" | 12" | 1013 ohms/sq. | 0000000 | 000000 |
2" | 24" | 1013 ohms/sq. | 0000000 | 00000 |
4" | 12" | 1013 ohms/sq. | 0000000 | 00000 |
3/8" Thick. (0" to 0.03") | ||||
2" | 12" | 1013 ohms/sq. | 0000000 | 00000 |
2" | 24" | 1013 ohms/sq. | 0000000 | 00000 |
4" | 12" | 1013 ohms/sq. | 0000000 | 00000 |
1/2" Thick. (0" to 0.03") | ||||
2" | 12" | 1013 ohms/sq. | 0000000 | 00000 |
2" | 24" | 1013 ohms/sq. | 0000000 | 000000 |
4" | 12" | 1013 ohms/sq. | 0000000 | 000000 |
3/4" Thick. (0" to 0.03") | ||||
2" | 12" | 1013 ohms/sq. | 0000000 | 00000 |
2" | 24" | 1013 ohms/sq. | 0000000 | 000000 |
4" | 12" | 1013 ohms/sq. | 0000000 | 000000 |
1" Thick. (0" to 0.03") | ||||
2" | 12" | 1013 ohms/sq. | 0000000 | 000000 |
2" | 24" | 1013 ohms/sq. | 0000000 | 000000 |
4" | 12" | 1013 ohms/sq. | 0000000 | 000000 |
Electrical-Insulating Ultem PEI Rods
![](/prerenderstable/mvPRE/contents/gfx/imagecache/524/5243t11p1-j03-digital@halfx_637044206431056227.png?ver=imagenotfound)
- Color: Semi-Clear Amber
- Temperature Range: -20° to 335° F
- Tensile Strength: 17,000-17,500 psi (Excellent)
- Impact Strength: 0.5-0.6 ft.-lbs./in. (Poor)
- Hardness: Rockwell R111-R125 (Extra Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D5205, ASTM D7293, FDA Compliant 21 CFR 177.1595, UL 94 V-0
These rods offer excellent electrical-insulating properties. They’re often used for circuit-breaker housings, manifolds, and semiconductor components.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Dielectric Strength | Lengths, ft. | Per Ft. | |
1/4" | 0.000" to 0.003" | 830 V/mil | 0000000 | 00000 | |
3/8" | 0.000" to 0.003" | 830 V/mil | 0000000 | 0000 | |
1/2" | 0.000" to 0.003" | 830 V/mil | 0000000 | 0000 | |
5/8" | 0.000" to 0.003" | 830 V/mil | 0000000 | 00000 | |
3/4" | 0.000" to 0.003" | 830 V/mil | 0000000 | 00000 | |
1" | 0.000" to 0.003" | 830 V/mil | 0000000 | 00000 | |
1 1/4" | 0.000" to 0.005" | 830 V/mil | 0000000 | 00000 | |
1 1/2" | 0.000" to 0.005" | 830 V/mil | 0000000 | 00000 | |
2" | 0.000" to 0.005" | 830 V/mil | 0000000 | 000000 | |
2 1/2" | 0.000" to 0.015" | 830 V/mil | 0000000 | 000000 | |
3" | 0.000" to 0.250" | 830 V/mil | 0000000 | 000000 | |
3 1/2" | 0.000" to 0.250" | 830 V/mil | 0000000 | 000000 |
Electrical-Insulating Ultem PEI Film
![](/prerenderstable/mvPRE/contents/gfx/imagecache/227/2271k3p1-j03-digital@halfx_637005932111413753.png?ver=imagenotfound)
Use this film in 3D printing operations as a build surface. It’s also widely used in semiconductor applications because it has excellent electrical-insulating properties.
For technical drawings and 3-D models, click on a part number.
- Color: Semi-Clear Amber
- Temperature Range: -20° to 335° F
- Tensile Strength: 14,200 psi (Excellent)
- Impact Strength: Not Rated
- Hardness: Rockwell M109 (Extra Hard)
- For Use Outdoors: Yes
- Specifications Met: UL 94 VTM-0
12" × 12" | 12" × 24" | |||||
---|---|---|---|---|---|---|
Thick. | Thick. Tolerance | Dielectric Strength | Each | Each | ||
0.001" | -0.0001" to 0.0001" | 3,050 V/mil | 0000000 | 00000 | 0000000 | 000000 |
0.002" | -0.0002" to 0.0002" | 3,050 V/mil | 0000000 | 0000 | 0000000 | 00000 |
0.003" | -0.0003" to 0.0003" | 3,050 V/mil | 0000000 | 0000 | 0000000 | 00000 |
0.005" | -0.0005" to 0.0005" | 3,050 V/mil | 0000000 | 00000 | 0000000 | 00000 |
0.01" | -0.001" to 0.001" | 3,050 V/mil | 0000000 | 00000 | 0000000 | 00000 |
0.02" | -0.002" to 0.002" | 3,050 V/mil | 0000000 | 00000 | 0000000 | 00000 |
0.03" | -0.003" to 0.003" | 3,050 V/mil | 0000000 | 00000 | 0000000 | 00000 |
- Color: Semi-Clear Amber
- Temperature Range: -20° to 335° F
- Tensile Strength: 14,200 psi (Excellent)
- Impact Strength: Not Rated
- Hardness: Rockwell M109 (Extra Hard)
- For Use Outdoors: Yes
12" × 12" | 12" × 24" | |||||
---|---|---|---|---|---|---|
Thick. | Thick. Tolerance | Dielectric Strength | Each | Each | ||
0.001" | -0.0001" to 0.0001" | 3,050 V/mil | 0000000 | 000000 | 0000000 | 000000 |
0.002" | -0.0002" to 0.0002" | 3,050 V/mil | 0000000 | 00000 | 000000 | 00 |
0.003" | -0.0003" to 0.0003" | 3,050 V/mil | 0000000 | 00000 | 0000000 | 00000 |
0.005" | -0.0005" to 0.0005" | 3,050 V/mil | 0000000 | 00000 | 0000000 | 00000 |
0.01" | -0.001" to 0.001" | 3,050 V/mil | 0000000 | 00000 | 0000000 | 00000 |
0.02" | -0.002" to 0.002" | 3,050 V/mil | 0000000 | 00000 | 000000 | 00 |
0.03" | -0.003" to 0.003" | 3,050 V/mil | 0000000 | 00000 | 000000 | 00 |
High-Temperature Plastic Selector Packs
![](/prerenderstable/mvPRE/contents/gfx/imagecache/533/5331k91p1-j03-digital@halfx_636917192569187873.png?ver=imagenotfound)
Includes one piece of each material listed.
For technical drawings and 3-D models, click on a part number.
Material | Wd. | Lg. | Pkg. Qty. | Pkg. | |
PEEK Plastic, PFA Plastic, Polyimide Plastic, Torlon PAI Plastic, Ultem PEI Plastic | 2" | 2" | 5 | 0000000 | 0000000 |
High-Temperature PEI 3D Printer Filaments
![]() | ![]() |
![]() |
Often used to make parts that will be used near ovens, engines, and other hot machinery, these PEI filaments remain strong and rigid in temperatures that would soften most plastic. They’re a lightweight alternative to machined metal parts. Print these filaments on a fused filament fabrication (FFF) 3D printer. Because of their high melting points, you'll need an all-metal extruder and heated printer bed to reach their minimum printing temperature. Without the heated printer bed, parts will cool too quickly and warp.
Tensile strength is the best measure of a filament’s overall strength. Similar to the stress applied on a rope during a game of tug-of-war, it’s the amount of pulling force a material can handle before breaking. A higher rating means a stronger filament. A tensile strength of 5,000 psi and above is considered good; 12,000 psi and above is excellent.
Maximum exposure temperature is the point at which a printed part will begin to deform. Above this temperature, your part will start to lose structural integrity.
Spool | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia., mm | Printing Temp. | For Printer Bed Temp. | Tensile Strength | Max. Exposure Temp. | For Min. Nozzle Dia., mm | Dia., mm | Dp., mm | Wt., g | Color | Each | |
PEI Plastic | |||||||||||
1.75 | 350° to 380° C 662° to 716° F | 140° to 160° C 284° to 320° F | 7,830 psi (Good) | 158° C 316° F | 0.4 | 195 | 40 | 500 | Semi-Clear Beige | 0000000 | 0000000 |
1.75 | 370° to 390° C 698° to 734° F | 120° to 160° C 248° to 320° F | 8,120 psi (Good) | 208° C 406° F | 0.4 | 195 | 40 | 500 | Opaque Gold | 0000000 | 000000 |