Filter by
Material
Length
ID
Plain Bearing Type
OD
Maximum Temperature
Sleeve Material
Fitting Connection
Fitting Type
Compatible With
Sleeving Type
DFARS Specialty Metals
Bearing Material
Housing Material
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Plain Bearings
More
About Heat-Shrink Tubing
More
About Sleeving
More
Chemical-Resistant Dry-Running Sleeve Bearings
PEEK Plastic
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
PEEK bearings are lightweight and strong.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Cap. | Color | Temp. Range, °F | Each | |
PEEK Plastic Bearings | ||||||
|---|---|---|---|---|---|---|
For 1/8" Shaft Dia. | ||||||
| 1/4" | 1/4" | 140 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 1/4" | 3/8" | 210 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 0000 |
For 3/16" Shaft Dia. | ||||||
| 1/4" | 1/4" | 195 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 0000 |
| 1/4" | 1/2" | 390 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 0000 |
| 5/16" | 1/4" | 195 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 0000 |
| 5/16" | 3/8" | 290 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 0000 |
| 5/16" | 1/2" | 390 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 1/4" Shaft Dia. | ||||||
| 5/16" | 1/4" | 195 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 0000 |
| 5/16" | 1/2" | 390 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 3/8" | 1/4" | 195 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 0000 |
| 3/8" | 3/8" | 290 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 3/8" | 1/2" | 390 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 5/16" Shaft Dia. | ||||||
| 3/8" | 1/4" | 195 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 0000 |
| 3/8" | 1/2" | 390 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 1/2" | 3/8" | 290 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 1/2" | 1/2" | 390 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 3/8" Shaft Dia. | ||||||
| 15/32" | 1/2" | 390 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 15/32" | 3/4" | 590 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 1/2" | 3/4" | 590 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 9/16" | 3/8" | 290 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 9/16" | 1/2" | 390 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 9/16" | 3/4" | 590 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 1/2" Shaft Dia. | ||||||
| 19/32" | 1/2" | 390 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 19/32" | 1" | 790 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 5/8" | 3/8" | 290 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 3/4" | 1/2" | 390 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 3/4" | 3/4" | 590 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 3/4" | 1" | 790 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 5/8" Shaft Dia. | ||||||
| 7/8" | 3/4" | 1,150 lbs. @ 60 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 7/8" | 1" | 1,550 lbs. @ 60 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 3/4" Shaft Dia. | ||||||
| 7/8" | 1" | 1,550 lbs. @ 60 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 1" | 1/2" | 790 lbs. @ 60 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 1" | 3/4" | 1,150 lbs. @ 60 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 1" | 1" | 1,550 lbs. @ 60 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 1" Shaft Dia. | ||||||
| 1 1/4" | 3/4" | 1,150 lbs. @ 60 rpm | Black | -40° to 500° | 00000000 | 00000 |
| 1 1/4" | 1" | 1,550 lbs. @ 60 rpm | Black | -40° to 500° | 00000000 | 00000 |
Metric PEEK Plastic Bearings | ||||||
For 5mm Shaft Dia. | ||||||
| 8mm | 10mm | 175 lbs. @ 120 rpm | Gold | -20° to 480° | 00000000 | 00000 |
For 6mm Shaft Dia. | ||||||
| 9mm | 8mm | 140 lbs. @ 120 rpm | Gold | -20° to 480° | 00000000 | 00000 |
| 10mm | 6mm | 105 lbs. @ 120 rpm | Gold | -20° to 480° | 00000000 | 00000 |
| 10mm | 10mm | 175 lbs. @ 120 rpm | Gold | -20° to 480° | 00000000 | 00000 |
For 8mm Shaft Dia. | ||||||
| 10mm | 6mm | 105 lbs. @ 120 rpm | Gold | -20° to 480° | 00000000 | 00000 |
| 12mm | 16mm | 280 lbs. @ 120 rpm | Gold | -20° to 480° | 00000000 | 00000 |
| 16mm | 16mm | 280 lbs. @ 120 rpm | Gold | -20° to 480° | 00000000 | 00000 |
For 10mm Shaft Dia. | ||||||
| 16mm | 16mm | 280 lbs. @ 120 rpm | Gold | -20° to 480° | 00000000 | 00000 |
| 16mm | 20mm | 350 lbs. @ 120 rpm | Gold | -20° to 480° | 00000000 | 00000 |
For 12mm Shaft Dia. | ||||||
| 20mm | 12mm | 210 lbs. @ 120 rpm | Gold | -20° to 480° | 00000000 | 00000 |
| 20mm | 30mm | 520 lbs. @ 120 rpm | Gold | -20° to 480° | 00000000 | 00000 |
For 16mm Shaft Dia. | ||||||
| 22mm | 30mm | 1,050 lbs. @ 60 rpm | Gold | -20° to 480° | 00000000 | 00000 |
For 20mm Shaft Dia. | ||||||
| 28mm | 30mm | 1,050 lbs. @ 60 rpm | Gold | -20° to 480° | 00000000 | 00000 |
Chemical-Resistant Dry-Running Flanged Sleeve Bearings
These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings. They are lightweight and strong.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
PEEK Plastic Bearings  | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 3/16" Shaft Dia. | |||||||||
| 1/4" | 1/4" | 3/8" | 1/32" | 195 lbs. @ 120 rpm | 175 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 1/4" | 1/2" | 3/8" | 1/32" | 390 lbs. @ 120 rpm | 175 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 0000 |
| 5/16" | 1/4" | 7/16" | 1/16" | 195 lbs. @ 120 rpm | 220 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 0000 |
| 5/16" | 1/2" | 7/16" | 1/16" | 390 lbs. @ 120 rpm | 220 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
For 1/4" Shaft Dia. | |||||||||
| 5/16" | 1/4" | 1/2" | 1/32" | 195 lbs. @ 120 rpm | 230 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 0000 |
| 5/16" | 1/2" | 1/2" | 1/32" | 390 lbs. @ 120 rpm | 230 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 3/8" | 3/8" | 1/2" | 1/16" | 290 lbs. @ 120 rpm | 230 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 0000 |
| 3/8" | 1/2" | 1/2" | 1/16" | 390 lbs. @ 120 rpm | 230 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
For 5/16" Shaft Dia. | |||||||||
| 3/8" | 1/4" | 9/16" | 1/32" | 195 lbs. @ 120 rpm | 240 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 0000 |
| 3/8" | 1/2" | 9/16" | 1/32" | 390 lbs. @ 120 rpm | 240 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
For 3/8" Shaft Dia. | |||||||||
| 15/32" | 1/4" | 11/16" | 3/64" | 195 lbs. @ 120 rpm | 300 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 15/32" | 1/2" | 11/16" | 3/64" | 390 lbs. @ 120 rpm | 300 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 15/32" | 3/4" | 11/16" | 3/64" | 590 lbs. @ 120 rpm | 300 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 1/2" | 3/8" | 5/8" | 1/16" | 290 lbs. @ 120 rpm | 250 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 1/2" | 1/2" | 5/8" | 1/16" | 390 lbs. @ 120 rpm | 250 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 1/2" | 3/4" | 5/8" | 1/16" | 590 lbs. @ 120 rpm | 250 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 5/8" | 1/2" | 7/8" | 1/8" | 390 lbs. @ 120 rpm | 440 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 5/8" | 3/4" | 7/8" | 1/8" | 590 lbs. @ 120 rpm | 440 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
For 1/2" Shaft Dia. | |||||||||
| 19/32" | 1/2" | 7/8" | 3/64" | 390 lbs. @ 120 rpm | 360 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 19/32" | 3/4" | 7/8" | 3/64" | 590 lbs. @ 120 rpm | 360 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 19/32" | 1" | 7/8" | 3/64" | 790 lbs. @ 120 rpm | 360 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 3/4" | 1/2" | 1" | 1/8" | 390 lbs. @ 120 rpm | 460 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 1/8" | 590 lbs. @ 120 rpm | 460 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 3/4" | 1" | 1" | 1/8" | 790 lbs. @ 120 rpm | 460 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
For 5/8" Shaft Dia. | |||||||||
| 23/32" | 1/2" | 15/16" | 3/64" | 790 lbs. @ 60 rpm | 650 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 23/32" | 3/4" | 15/16" | 3/64" | 1,150 lbs. @ 60 rpm | 650 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 7/8" | 3/4" | 1" | 1/8" | 1,150 lbs. @ 60 rpm | 760 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 7/8" | 1" | 1" | 1/8" | 1,550 lbs. @ 60 rpm | 760 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
For 3/4" Shaft Dia. | |||||||||
| 7/8" | 1/2" | 1 1/8" | 1/16" | 790 lbs. @ 60 rpm | 780 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 7/8" | 1" | 1 1/8" | 1/16" | 1,550 lbs. @ 60 rpm | 780 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 1" | 1" | 1 1/4" | 1/8" | 1,550 lbs. @ 60 rpm | 1,000 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
For 1" Shaft Dia. | |||||||||
| 1 1/8" | 1/2" | 1 3/8" | 1/16" | 790 lbs. @ 60 rpm | 800 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 1 1/8" | 3/4" | 1 3/8" | 1/16" | 1,150 lbs. @ 60 rpm | 800 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
| 1 1/8" | 1" | 1 3/8" | 1/16" | 1,550 lbs. @ 60 rpm | 800 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
For 3 mm Shaft Dia. | |||||||||
| 6mm | 4mm | 9mm | 1.5mm | 70 lbs. @ 120 rpm | 110 lbs. @ 120 rpm | Beige | -20° to 450° | 00000000 | 00000 |
For 5 mm Shaft Dia. | |||||||||
| 8mm | 10mm | 11mm | 1.5mm | 175 lbs. @ 120 rpm | 120 lbs. @ 120 rpm | Beige | -20° to 450° | 00000000 | 00000 |
For 6 mm Shaft Dia. | |||||||||
| 10mm | 10mm | 14mm | 2mm | 175 lbs. @ 120 rpm | 155 lbs. @ 120 rpm | Beige | -20° to 450° | 00000000 | 00000 |
For 7 mm Shaft Dia. | |||||||||
| 11mm | 8mm | 15mm | 2mm | 140 lbs. @ 120 rpm | 160 lbs. @ 120 rpm | Beige | -20° to 450° | 00000000 | 00000 |
For 8 mm Shaft Dia. | |||||||||
| 11mm | 10mm | 14mm | 1.5mm | 175 lbs. @ 120 rpm | 125 lbs. @ 120 rpm | Beige | -20° to 450° | 00000000 | 00000 |
| 12mm | 8mm | 16mm | 2mm | 140 lbs. @ 120 rpm | 165 lbs. @ 120 rpm | Beige | -20° to 450° | 0000000 | 00000 |
| 12mm | 16mm | 16mm | 2mm | 280 lbs. @ 120 rpm | 165 lbs. @ 120 rpm | Beige | -20° to 450° | 00000000 | 00000 |
For 10 mm Shaft Dia. | |||||||||
| 16mm | 16mm | 22mm | 3mm | 280 lbs. @ 120 rpm | 240 lbs. @ 120 rpm | Beige | -20° to 450° | 00000000 | 00000 |
For 12 mm Shaft Dia. | |||||||||
| 15mm | 12mm | 18mm | 1.5mm | 210 lbs. @ 120 rpm | 135 lbs. @ 120 rpm | Beige | -20° to 450° | 00000000 | 00000 |
| 17mm | 20mm | 22mm | 2.5mm | 350 lbs. @ 120 rpm | 210 lbs. @ 120 rpm | Beige | -20° to 450° | 00000000 | 00000 |
For 16 mm Shaft Dia. | |||||||||
| 20mm | 12mm | 24mm | 2mm | 420 lbs. @ 60 rpm | 360 lbs. @ 60 rpm | Beige | -20° to 450° | 00000000 | 00000 |
For 18 mm Shaft Dia. | |||||||||
| 24mm | 22mm | 30mm | 3mm | 770 lbs. @ 60 rpm | 520 lbs. @ 60 rpm | Beige | -20° to 450° | 00000000 | 00000 |
For 20 mm Shaft Dia. | |||||||||
| 24mm | 12mm | 28mm | 2mm | 420 lbs. @ 60 rpm | 370 lbs. @ 60 rpm | Beige | -20° to 450° | 00000000 | 00000 |
| 26mm | 20mm | 32mm | 3mm | 700 lbs. @ 60 rpm | 530 lbs. @ 60 rpm | Beige | -20° to 450° | 00000000 | 00000 |
Food Industry Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
Made of FDA listed PEEK, these bearings are suitable for direct contact with food. They withstand wet, corrosive environments and have good chemical compatibility. The closed backing blocks out dust and other contaminants.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Specifications Met | Each | |
PEEK Plastic Bearings with PEEK Plastic Housing | |||||||||||||
| 1/8" | 33/64" | 53/64" | 21/64" | 7/64" | 9/64" | 9/64" | 15/32" | 125 lbs. @ 120 rpm | -140° to 480° | Fixed Alignment | FDA Compliant 21 CFR 177.2415 | 000000 | 00000 |
| 3/16" | 9/16" | 63/64" | 7/16" | 9/32" | 5/32" | 9/64" | 19/32" | 330 lbs. @ 120 rpm | -140° to 480° | Fixed Alignment | FDA Compliant 21 CFR 177.2415 | 000000 | 0000 |
| 1/4" | 19/32" | 1 5/64" | 15/32" | 5/16" | 5/32" | 9/64" | 11/16" | 360 lbs. @ 120 rpm | -140° to 480° | Fixed Alignment | FDA Compliant 21 CFR 177.2415 | 000000 | 0000 |
| 5/16" | 23/32" | 1 5/16" | 1/2" | 11/32" | 5/32" | 5/32" | 53/64" | 400 lbs. @ 120 rpm | -140° to 480° | Fixed Alignment | FDA Compliant 21 CFR 177.2415 | 000000 | 0000 |
| 3/8" | 13/16" | 1 1/2" | 37/64" | 13/32" | 11/64" | 5/32" | 1" | 470 lbs. @ 120 rpm | -140° to 480° | Fixed Alignment | FDA Compliant 21 CFR 177.2415 | 000000 | 0000 |
High-Temperature Expandable Sleeving
Protect cable, hose, and pipe from abrasion and cuts in high temperature environments—this sleeving withstands temperatures over 450° F. It expands to fit over items for easy installation; sleeving then tightens around its contents for a secure fit. The braided construction permits heat and moisture to dissipate.
PTFE and PEEK sleeving withstand chemicals and salt water, so they can be used in extreme environments where cable and hose need protection from harsh fluids, such as in chemical plants and in oil and gas production. It has better abrasion and tear resistance than fiberglass sleeving. PTFE sleeving also withstands acids and solvents. PEEK is lighter in weight than PTFE, and more cost efficient.
Flame rated VW-1 sleeving meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
PTFE and PEEK Sleeving
Per Ft. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| ID | Expanded ID | Wall Thick. | Temperature Range, °F | Specifications Met | Color | Length, ft. | 1-49 | 50-Up | |
PEEK Fabric | |||||||||
| 1/4" | 1/2" | 1/32" | -90° to 480° | UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
| 1/2" | 7/8" | 1/32" | -90° to 480° | UL 2556 VW-1 | Black | 0000000 | 00000 | 0000 | |
| 3/4" | 1 1/8" | 1/32" | -90° to 480° | UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
| 1 1/4" | 1 3/4" | 1/32" | -90° to 480° | UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
| 1 3/4" | 2 1/2" | 1/32" | -90° to 480° | UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
High-Temperature Heat-Shrink Tubing
Use this tubing in applications where temperatures reach up to 500° F. It’s often used to insulate electronic components. Tubing resists abrasion and chemicals. Semi-rigid, it bends only slightly.
PEEK tubing has a higher dielectric strength than PTFE, so it’s better for electrical insulation. It also withstands high-pressure applications and is often used in oil and gas exploration.Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
For technical drawings and 3-D models, click on a part number.
PEEK Plastic
- Shrink Ratio: 1.4:1
- Dielectric Strength: 580 V/mil
- Shrink Temperature: 575° F
- Temperature Range: -10° to 500° F
- Flexibility: Semi-Rigid
ID | |||||||
|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | For Wire Gauge | Color | Lengths, ft. | Per Ft. | |
| 0.04" | 0.02" | 0.005" | 18 | Clear Amber | 00000000 | 00000 | |
| 0.05" | 0.03" | 0.005" | 16 | Clear Amber | 0000000 | 0000 | |
| 0.09" | 0.06" | 0.005" | 14 | Clear Amber | 0000000 | 0000 | |
| 0.1" | 0.07" | 0.005" | 12 | Clear Amber | 0000000 | 0000 | |
| 0.13" | 0.09" | 0.005" | 10 | Clear Amber | 0000000 | 00000 | |
| 0.16" | 0.11" | 0.005" | 8 | Clear Amber | 0000000 | 00000 | |
| 0.2" | 0.14" | 0.005" | 6 | Clear Amber | 0000000 | 00000 | |
| 0.25" | 0.18" | 0.005" | 4 | Clear Amber | 0000000 | 00000 | |
| 0.32" | 0.23" | 0.005" | 2 | Clear Amber | 0000000 | 00000 | |
| 0.39" | 0.28" | 0.005" | 1/0 | Clear Amber | 0000000 | 00000 | |
PEEK Unthreaded Spacers
Use PEEK spacers as an alternative to metal spacers in high-temperature, high-stress applications. They resist chemicals, wear, and moisture.
For technical drawings and 3-D models, click on a part number.
| Lg. | For Screw Size | ID | Temperature Range, °F | Color | Specifications Met | Each | |
3/8" OD | |||||||
|---|---|---|---|---|---|---|---|
| 1/4" | No. 10 | 0.192" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 000000 |
| 3/8" | No. 10 | 0.192" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1/2" | No. 10 | 0.192" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 5/8" | No. 10 | 0.192" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 3/4" | No. 10 | 0.192" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 7/8" | No. 10 | 0.192" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1" | No. 10 | 0.192" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1 1/4" | No. 10 | 0.192" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1 1/2" | No. 10 | 0.192" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1 3/4" | No. 10 | 0.192" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 2" | No. 10 | 0.192" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
1/2" OD | |||||||
| 1/4" | 1/4" | 0.252" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 3/8" | 1/4" | 0.252" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1/2" | 1/4" | 0.252" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 5/8" | 1/4" | 0.252" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 3/4" | 1/4" | 0.252" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 7/8" | 1/4" | 0.252" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1" | 1/4" | 0.252" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1 1/4" | 1/4" | 0.252" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1 1/2" | 1/4" | 0.252" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1 3/4" | 1/4" | 0.252" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 2" | 1/4" | 0.252" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
3/4" OD | |||||||
| 1/4" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 3/8" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1/2" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 5/8" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 3/4" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 7/8" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1 1/4" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1 1/2" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 1 3/4" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 2" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 2 1/4" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
| 2 1/2" | 3/8" | 0.380" | -40° to 480° | Beige | ASTM D4000; MIL-P-46183 Type 1 | 000000000 | 00000 |
PTFE Sleeves for Yor-Lok Fittings
- For Use With: Air, Cutting Oil, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -65° to 350° F
- Tubing: Use with firm or hard acetal plastic, EVA plastic, HDPE plastic, nylon plastic, PEEK plastic, polycarbonate plastic, polyethylene plastic, polypropylene plastic, PTFE plastic, PVC plastic, PVDF plastic, or THV plastic
- Compatible With: Let-Lok, Parker A-Lok, Swagelok®
Made of plastic, these sleeves create a strong seal without damaging tubing.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Sleeve Material | Each | |
| 1/16" | PTFE Plastic | 00000000 | 000000 |
| 1/8" | PTFE Plastic | 00000000 | 0000 |
| 3/16" | PTFE Plastic | 00000000 | 00000 |
| 1/4" | PTFE Plastic | 00000000 | 0000 |
| 5/16" | PTFE Plastic | 00000000 | 0000 |
| 3/8" | PTFE Plastic | 00000000 | 0000 |
| 1/2" | PTFE Plastic | 00000000 | 0000 |
| 5/8" | PTFE Plastic | 00000000 | 00000 |
| 3/4" | PTFE Plastic | 00000000 | 00000 |
| 1" | PTFE Plastic | 00000000 | 00000 |