DIN-Rail Mount Enclosures
Snap these enclosures onto 35 mm DIN rail and lock them in place. They have internal slots to hold circuit boards. Remove the included end caps and slide off the front panel to access components.
For technical drawings and 3-D models, click on a part number.
| Ht. | Wd. | Dp. | For DIN Rail Trade Size | Environment | Environmental Rating | Specifications Met | Each | |
Aluminum  | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3" | 4 1/8" | 1" | DIN 3 | Indoor Only | IP40 | DIN EN 60529 | 0000000 | 000000 |
| 3" | 5 1/2" | 1" | DIN 3 | Indoor Only | IP40 | DIN EN 60529 | 0000000 | 00000 |
| 3" | 7" | 1" | DIN 3 | Indoor Only | IP40 | DIN EN 60529 | 0000000 | 00000 |
| 3" | 9 3/4" | 1" | DIN 3 | Indoor Only | IP40 | DIN EN 60529 | 0000000 | 00000 |
| 4 1/8" | 4 1/8" | 1" | DIN 3 | Indoor Only | IP40 | DIN EN 60529 | 0000000 | 00000 |
| 4 1/8" | 5 1/2" | 1" | DIN 3 | Indoor Only | IP40 | DIN EN 60529 | 0000000 | 00000 |
| 4 1/8" | 7" | 1" | DIN 3 | Indoor Only | IP40 | DIN EN 60529 | 0000000 | 00000 |
| 4 1/8" | 8 1/4" | 1" | DIN 3 | Indoor Only | IP40 | DIN EN 60529 | 0000000 | 00000 |
| 4 1/8" | 9 3/4" | 1" | DIN 3 | Indoor Only | IP40 | DIN EN 60529 | 0000000 | 00000 |
DIN-Rail Mount Washdown Enclosures
These enclosures shield electrical components from water, so they’re safe to install onto DIN rail in wet and washdown environments. They also resist rusting when exposed to water since they are aluminum and have a polycarbonate cover. You can use them inside other enclosures for extra protection or to keep components separate. All have slots that hold up to three circuit boards. The circuit boards snap into place—no need for tools.
Add a see-through cover to these enclosures to inspect internal parts without removing the cover.
For technical drawings and 3-D models, click on a part number.
Enclosures | See-Through Covers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Height | Width | Depth | For DIN Rail Trade Size | Environment | Environmental Rating | Includes | Specifications Met | Each | Each | ||
Aluminum with Polycarbonate Plastic Cover | |||||||||||
| 2 3/4" | 3 7/8" | 1 1/8" | DIN 3 | Damp, Dusty, Washdown | IP66 | End Cap Fasteners | UL 94 V-0 | 0000000 | 000000 | 00000000 | 00000 |
| 2 3/4" | 3 7/8" | 1 3/4" | DIN 3 | Damp, Dusty, Washdown | IP66 | End Cap Fasteners | UL 94 V-0 | 0000000 | 00000 | 00000000 | 0000 |
| 2 3/4" | 3 7/8" | 2 3/8" | DIN 3 | Damp, Dusty, Washdown | IP66 | End Cap Fasteners | UL 94 V-0 | 0000000 | 00000 | 00000000 | 0000 |
| 2 3/4" | 3 7/8" | 3 1/8" | DIN 3 | Damp, Dusty, Washdown | IP66 | End Cap Fasteners | UL 94 V-0 | 0000000 | 00000 | 00000000 | 0000 |
| 2 3/4" | 3 7/8" | 4 7/16" | DIN 3 | Damp, Dusty, Washdown | IP66 | End Cap Fasteners | UL 94 V-0 | 0000000 | 00000 | 00000000 | 0000 |
| 2 3/4" | 3 7/8" | 6 9/16" | DIN 3 | Damp, Dusty, Washdown | IP66 | End Cap Fasteners | UL 94 V-0 | 0000000 | 00000 | 00000000 | 0000 |
Raspberry Pi Enclosures
Shield your board from dust and impact. These enclosures are designed for an exact fit around your Raspberry Pi and its ports, so you can still plug in accessories. To keep your board cool during use, an included thermal pad and built-in heatsink draw away heat.
For technical drawings and 3-D models, click on a part number.
| For Manufacturer Series | Ht. | Wd. | Dp. | Features | Each | |
Aluminum | ||||||
|---|---|---|---|---|---|---|
With Lift-Off Cover and Screw Closure | ||||||
| Zero | 1/2" | 1 7/16" | 2 7/8" | Built-In Heatsink, Thermal Pad | 0000000 | 000000 |
| 3 | 1 3/16" | 2 5/8" | 3 5/8" | Built-In Heatsink, Thermal Pad | 0000000 | 00000 |
| 4 | 1 1/8" | 2 5/8" | 3 11/16" | Built-In Heatsink, Thermal Pad | 0000000 | 00000 |
| 5 | 1 1/8" | 2 5/8" | 3 11/16" | Built-In Heatsink, Thermal Pad | 0000000 | 00000 |
Single-Board Computer Enclosures
Protect the sensitive components of your single-board computer or development board from dust and impact. These enclosures are compatible with a wide range of boards, including Raspberry Pis and Arduinos. A mounting flange on the body allows you to secure them to walls and machinery.
IP65-rated enclosures protect boards from dust and light rinses. They’re also suitable for use outdoors. Up to eight cables can pass through the enclosure wall, and an included gasket creates a tight seal between the opening and your cables.
Enclosures with a cooling fan dissipate heat generated by your board. They’re ideal for use in environments with high ambient temperatures to prevent overheating. Attach the included heatsinks to chips on your board for additional cooling. These enclosures have 10 knockouts for cables to pass through and several holes for connecting wireless antennas.
Extended covers (sold separately) add 2.7" of usable inside height for stacks of multiple boards or peripheral electronics.
For technical drawings and 3-D models, click on a part number.
Enclosures | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inside | Extended Covers | ||||||||||||||
| Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | No. of Knockouts | Knockout Ht. | Knockout Wd. | Mounting Fasteners Included | Features | Color | Each | Each | ||
With Lift-Off Cover, Screw Closure, and Knockouts | |||||||||||||||
ABS Plastic | |||||||||||||||
| 8 5/16" | 4 3/4" | 2 3/8" | 6 7/16" | 4 1/2" | 2" | 10 | 1 1/4" | 3/8" | Yes | Cooling Fan, Heatsinks, Removable Base Plate | Gray | 0000000 | 000000 | 0000000 | 000000 |