Surface-Mount Access Ports
Gain access to pipes, pumps, hoses, wiring, and controls behind ceilings and walls. The panel opening is the same size as the cutout.
Mounting | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Cutout Dia. | O'all Dia. | Panel Thick. | Frame Thick. | Color | Latch Type | Opens With | Fasteners Included | For Screw Size  | Each | |
Plastic Panel and Frame | ||||||||||
| 3 1/2" | 5 3/16" | 0.156" | 0.156" | White | Push-to-Close | Handle | Yes | No. 10 | 0000000 | 000000 |
Gasketed Access Ports
Gaskets form a tight seal to keep out dust and moisture. Use these panels to gain access to pipes, pumps, hoses, wiring, and controls behind ceilings, floors, and walls. The panel opening is up to 1 1/4" smaller than the cutout.
Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Cutout Dia. | O'all Dia. | Panel Thick. | Frame Thick. | Seal Material | Color | Cap., lbs. | Temp. Range, °F | Latch Type | Opens With | Fasteners Included | Hole Dia. | Each | |
Aluminum Panel and Frame | |||||||||||||
| 6 3/8" | 8 3/8" | 0.233" | 0.271" | EPDM Rubber | __ | 300 | -20° to 150° | Cam | Handle | No | 3/16" | 000000 | 0000000 |
| 8 1/2" | 10 9/16" | 0.236" | 0.24" | EPDM Rubber | __ | 300 | -20° to 150° | Cam | Handle | No | 3/16" | 000000 | 000000 |
| 10 1/2" | 12 1/2" | 0.243" | 0.25" | EPDM Rubber | __ | 300 | -20° to 150° | Cam | Handle | No | 3/16" | 000000 | 000000 |
Plastic Panel and Frame | |||||||||||||
| 6 3/8" | 8 3/8" | 0.182" | 0.231" | EPDM Rubber | White | Not Rated | -20° to 150° | Cam | Handle | No | 1/8" | 0000000 | 00000 |
| 8 1/2" | 10 9/16" | 0.201" | 0.246" | EPDM Rubber | White | Not Rated | -20° to 150° | Cam | Handle | No | 1/8" | 0000000 | 00000 |
| 10 1/2" | 12 1/2" | 0.194" | 0.23" | EPDM Rubber | White | Not Rated | -20° to 150° | Cam | Handle | No | 1/8" | 0000000 | 00000 |
Tank and Hopper Access Ports
Use these ports to access and inspect the interior of tanks and hoppers. All have gaskets to shut out dust and moisture. They also have a padlockable hasp that accepts up to a 5/16" dia. shackle. The panel opening is the same size as the cutout.
O'all | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Cutout Dia. | Dia. | Dp. | Panel Thick. | Frame Thick. | Seal Material | Temp. Range, °F | Opens With | Padlock Included | Mount Type | Each | |
Steel Panel and Frame | |||||||||||
| 8" | 13 5/8" | 4 3/8" | 0.135" | 0.135" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 0000000 |
| 10" | 13 3/8" | 4 1/8" | 0.135" | 0.135" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 000000 |
| 20" | 23 13/16" | 4 5/8" | 0.135" | 0.135" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 000000 |
| 24" | 28 3/8" | 5 1/2" | 0.135" | 0.135" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 00000000 |
304 Stainless Steel Panel and Frame | |||||||||||
| 8" | 13 5/8" | 4 3/8" | 0.141" | 0.141" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 000000 |
| 10" | 13 3/8" | 4 1/8" | 0.141" | 0.141" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 000000 |
| 20" | 23 13/16" | 4 5/8" | 0.141" | 0.141" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 00000000 |
| 24" | 28 3/8" | 5 1/2" | 0.141" | 0.141" | Buna-N Rubber | -40° to 250° | Handle | No | Weld On | 00000000 | 00000000 |
Access Ports for Insulated Pipes
These flexible ports are often used to inspect insulated pipes and tanks for corrosion. Their frame has locking ridges to secure it in insulation that is at least 3/4" thick; no mounting screws or caulk needed. The panel fits snugly into the frame for a watertight seal. Panel opening is up to 1 1/4" smaller than the cutout.
Enclosure Louvers
Relieve heat buildup and prevent condensation from forming inside enclosures and other small spaces.
All aluminum louvers have small openings between their blades to stop bugs from getting inside your enclosure. Anodized aluminum louvers withstand corrosion better than unfinished and powder-coated aluminum louvers. They’re good for settings such as saltwater environments. Darkroom louvers have a shield on the back that blocks out light—use them where light control is a concern.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Opening Dia. | Dia. | Dp. | For Min. Wall Thickness | For Max. Wall Thickness | Blade Thickness | Louver Type | Louver Panel Style | Mounting Fasteners Included | Pkg. Qty. | Pkg. | |
Aluminum Frame and Blades | |||||||||||
Standard Collar | |||||||||||
| 1" | 1 1/4" | 3/8" | 1/8" | __ | 0.015" | __ | Single | No | 12 | 000000 | 000000 |
| 1 1/2" | 1 3/4" | 3/8" | 1/8" | __ | 0.015" | __ | Single | No | 12 | 000000 | 00000 |
| 2" | 2 1/2" | 1/2" | 1/8" | __ | 0.015" | __ | Single | No | 12 | 000000 | 00000 |
| 2 1/2" | 3" | 5/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 000000 | 0000 |
| 3" | 3 1/2" | 5/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 4" | 4 1/2" | 3/4" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
Tabbed Collar | |||||||||||
| 1" | 1 1/8" | 3/8" | __ | 1/8" | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 1 1/2" | 1 3/4" | 3/8" | __ | 1/8" | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 2" | 2 3/8" | 1/2" | __ | 1/8" | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 2 1/2" | 2 15/16" | 5/8" | __ | 1/8" | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 3" | 3 1/2" | 5/8" | __ | 1/8" | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 4" | 4 1/2" | 3/4" | __ | 1/8" | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
Anodized Aluminum Frame and Blades | |||||||||||
Standard Collar | |||||||||||
| 1" | 1 1/8" | 3/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 1 1/2" | 1 3/4" | 3/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 2" | 2 3/8" | 1/2" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 2 1/2" | 2 15/16" | 5/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 3" | 3 1/2" | 5/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 4" | 4 1/2" | 3/4" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
Tabbed Collar | |||||||||||
| 1" | 1 1/8" | 3/8" | __ | 1/8" | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 1 1/2" | 1 3/4" | 3/8" | __ | 1/8" | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 2" | 2 3/8" | 1/2" | __ | 1/8" | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 2 1/2" | 2 15/16" | 5/8" | __ | 1/8" | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 3" | 3 1/2" | 5/8" | __ | 1/8" | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 4" | 4 1/2" | 3/4" | __ | 1/8" | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
Black Anodized Aluminum Frame and Blades | |||||||||||
Standard Collar | |||||||||||
| 1" | 1 1/8" | 3/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 1 1/2" | 1 3/4" | 3/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 2" | 2 3/8" | 1/2" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 2 1/2" | 2 15/16" | 5/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 3" | 3 1/2" | 5/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 4" | 4 1/2" | 3/4" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 4" | 4 1/2" | 3/4" | 1/8" | __ | 0.015" | Darkroom | Single | No | 1 | 000000 | 00000 |
White Powder-Coated Aluminum Frame and Blades | |||||||||||
Standard Collar | |||||||||||
| 1" | 1 1/4" | 3/8" | 1/8" | __ | 0.015" | __ | Single | No | 12 | 0000000 | 00000 |
| 1 1/2" | 1 3/4" | 3/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 2" | 2 1/2" | 1/2" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 2 1/2" | 2 15/16" | 5/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 3" | 3 1/2" | 5/8" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
| 4" | 4 1/2" | 3/4" | 1/8" | __ | 0.015" | __ | Single | No | 1 | 0000000 | 0000 |
White Plastic Frame and Blades | |||||||||||
Standard Collar | |||||||||||
| 2" | 2 1/2" | 1" | 1/8" | __ | 0.07" | __ | Single | No | 1 | 0000000 | 0000 |
| 3" | 3 1/2" | 1" | 1/8" | __ | 0.07" | __ | Single | No | 1 | 0000000 | 0000 |
| 4" | 4 1/2" | 1" | 1/8" | __ | 0.07" | __ | Single | No | 1 | 0000000 | 0000 |
Peg-Style Standoff Panel-Hanging Brackets
Use four brackets to support the top and bottom edges of panels without drilling holes in them. These brackets give mounted display panels, signs, and glass panels an updated look while maintaining a uniform space between the panel and mounting surface. You can also use a single bracket as a decorative hook.
For technical drawings and 3-D models, click on a part number.
Two-Piece Standoff Panel-Hanging Brackets
Fit these brackets through drilled holes in panels. They give mounted display panels, signs, and glass panels an updated look while maintaining a uniform space between the panel and mounting surface. Each bracket includes a barrel, cap, and set screw.
For technical drawings and 3-D models, click on a part number.
Round brackets require mounting hardware (sold separately).
Brackets | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Threaded Studs for Wood | Toggle Bolts for Drywall | Drilling Anchors for Drywall, Plaster, and Wood Paneling | ||||||||||
| (A) | (B) | OD | Capacity | Mounting Fasteners Included | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
For 3/8" Max. Panel Thickness—Anodized Aluminum (Dull) | |||||||||||||
| 5/8" | 1/2" | 1 1/4" | Not Rated | No | 000000000 | 000000 | 1 | 000000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
| 1" | 1/2" | 1 1/4" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
| 1 1/2" | 1/2" | 1 1/4" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
| 2" | 1/2" | 1 1/4" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
| 3" | 1/2" | 1 1/4" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
| 4" | 1/2" | 1 1/4" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
| 6" | 1/2" | 1 1/4" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
For 1/2" Max. Panel Thickness—Anodized Aluminum (Dull) | |||||||||||||
| 1/2" | 5/16" | 5/8" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000 | 00 | 000000000 | 00000 |
| 1/2" | 3/8" | 1" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
| 3/4" | 5/16" | 5/8" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000 | 00 | 000000000 | 0000 |
| 1" | 5/16" | 5/8" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000 | 00 | 000000000 | 0000 |
| 1" | 3/8" | 1" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
| 1 1/2" | 5/16" | 5/8" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000 | 00 | 000000000 | 0000 |
| 1 1/2" | 3/8" | 1" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
| 2" | 5/16" | 5/8" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000 | 00 | 000000000 | 0000 |
| 2" | 3/8" | 1" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
| 3" | 5/16" | 5/8" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000 | 00 | 000000000 | 0000 |
| 3" | 3/8" | 1" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
| 4" | 3/8" | 1" | Not Rated | No | 000000000 | 00000 | 1 | 000000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
Screw-Grip Standoff Panel-Hanging Brackets
No need to drill holes in panels—tighten the set screw to hold them in place. These brackets give mounted display panels, signs, and glass panels an updated look while maintaining a uniform space between the panel and mounting surface. Each bracket includes a barrel with a nylon set screw under a removable cap.
Use the mounting hardware (sold separately) to mount into drywall and wood.
For technical drawings and 3-D models, click on a part number.
