Stop pallets from hitting the front of your forklift. These spacers sit at the rear of your forks to keep loads from sliding too far back and causing damage. The attached end loop secures the spacer around each fork.

For technical drawings and 3-D models, click on a part number.

Mount these indicators to your forklift’s mast, and you can check the angle of the forks without leaving your seat. These indicators help you keep loads level, so they won’t tip or slide off. Two brightly colored pointers show you how much a load is tilting. When the red pointer is above or below the yellow pointer, your forks are at an angle. When the two are aligned, the forks are level, and you can safely move material. Choose a spot on your mast you can easily see from the seat and attach these indicators with the included hook and loop strips.

Shift loads off pallets and into containers from the safety of your forklift. A long cable extends from the top of these dumpers to your seat—pull it to release a latch and tip the front of the dumper. A hook at the end of each arm keeps the pallet from sliding off. Once you’ve dumped the load, lower your forks to the ground to straighten the pallet and latch the dumper back together.

Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.

Warning: Never use to lift people or items over people.