About Paint and Protective Coatings
More
Paint for Plastic
This paint adheres to most types of plastic without sanding or priming.
Paint that cannot be sold to Canada is restricted by local chemical regulations.
Dry Time | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Net Weight, oz. | Composition | Formulation | Touch, min. | O'all, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | For Use Outdoors | For Use On | Choose a Color (Appearance) | 1-5 | 6-Up | |
| 12 | Solvent Based | Alkyd | 20 | 24 | 10 sq. ft. @ 1.5 mil | 90° | Yes | ABS Plastic, PVC Plastic, Vinyl Plastic | 0000000 | 00000 | 00000 | |
Surface Filler Patches
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
| Lg. | Wd. | Begins to Harden, min. | Reaches Full Strength, hrs. | Mix Ratio | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2" | 12" | 1 | 24 | 1:1 | Yes | -85° to 220° | Red | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 000000 |
| 2" | 20" | 1 | 24 | 1:1 | Yes | -85° to 220° | Amber | Machine, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
| 4" | 6" | 1 | 24 | 1:1 | Yes | -85° to 220° | Blue | Machine, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
| 4" | 12" | 1 | 24 | 1:1 | Yes | -85° to 220° | Green | Machine, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
Water-Resistant Surface Fillers
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
Paste fillers resist alkalies, solvents, gasoline, and oil.
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | |||||||||||||
| 2 | Tube | 5 | 60 min. | Paste | 1:1 | 12 sq. in. @ 1/4" | 1/2" | Not Rated to 200° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 000000 |
| 2 | Jar, Bottle | 20 | 24 hrs. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
| 2 | Jar, Bottle | 20 | 24 hrs. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
| 14 | Can, Jar | 20 | 24 hrs. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
| 14 | Can, Jar | 20 | 24 hrs. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
Fuel-Resistant Surface Fillers
Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, pt. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
| 1.5 | Can | 5 | 24 | Thick Liquid | 2:1 | No | 70° to 90° | Amber | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain | 0000000 | 000000 |
| 3 | Can | 5 | 24 | Thick Liquid | 2:1 | No | 70° to 90° | Amber | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain | 0000000 | 00000 |
Surface Fillers for Plastic
Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.
Devcon Flexane 80 Putty can be used with vinyl plastic and rubber.
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight | Type | Begins to Harden | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Flexane 80 Putty | |||||||||||||
| 15820 | 1 lbs. | Can | 20 min. | 7 days | Putty | 2.6:1 | 90 sq. in. @ 1/4" | -40° to 180° | Black | Sand | Vinyl Plastic, EPDM Rubber, SBR Rubber | 00000000 | 0000000 |
Goo Gone Paint Removers
Clean up water-based paint messes without damaging the surface underneath. In addition to wet and dry paint, these cleaners also remove varnish, shellac, and caulk. They cling to vertical surfaces, such as wood baseboards and trim, to easily remove spills and splatter. Use them on floors, brushes, tools, and ladders as well.
Note: Not for use on painted surfaces or PVC.
Container | |||||||
|---|---|---|---|---|---|---|---|
| Type | Size, fl. oz. | Composition | Harshness | For Use On | For Removing | Each | |
Liquid | |||||||
| Spray Bottle | 24 | Water Based | Moderate | Aluminum, Carpet, Ceramic, Chrome, Fabric, Fiberglass, Galvanized Steel, Glass, Iron, Plastic, Porcelain, Stainless Steel, Steel, Stone, Vinyl, Waxed Floors | Caulk/Sealants, Paint (Latex) | 00000000 | 000000 |
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Type | Size, fl. oz. | Composition | Harshness | For Use On | For Removing | Pkg. Qty. | Pkg. | |
Liquid | ||||||||
| Spray Bottle | 24 | Water Based | Moderate | Aluminum, Carpet, Ceramic, Chrome, Fabric, Fiberglass, Galvanized Steel, Glass, Iron, Plastic, Porcelain, Stainless Steel, Steel, Stone, Vinyl, Waxed Floors | Caulk/Sealants, Paint (Latex) | 4 | 00000000 | 000000 |