Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

Enhance, renew, and protect surfaces.

Solvent-based paint keeps its color longer than water-based paint when used outdoors.

Hide blemishes and protrusions on shingles and flashing. This paint matches common roofing material. It dries quickly to help keep leaves, pollen, and other contaminants from adhering, damaging your finish. Once dry, paint prevents corrosion on flashing and other metal surfaces.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Apply acrylic coatings with a roller or sprayer. Apply gallon-sized water-based coatings with a roller. Apply gallon-sized solvent-based coatings with a notched trowel, sprayer, or a roller cover for thick coatings (sold separately).

Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface. Apply with a notched trowel, roller, or sprayer. The size listed is the combined total of the two parts. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Coatings in a pail have a resin and a hardener in separate containers that can be mixed in the pail.

These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction. Apply with a roller. The resin and hardener come in separate containers that can be mixed in the pail. The size listed is the combined total of the two parts. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Coatings that meet MIL-PRF 24667 Type 1 are our most wear and impact resistant. They can also be applied with a notched trowel.

These polyurethane-based coatings resist moisture, corrosion, abrasion, and impact better than paint and have excellent color retention. They're often used as a topcoat over epoxy coatings. Apply with a brush, roller, or sprayer. They cannot be sold to the regions listed due to local chemical regulations, including limits on VOC (volatile organic compounds).

Also known as brushable ceramic, these coatings create a hard, low-friction surface that resists corrosion. They're often used on liquid processing equipment, such as pump casings, impeller blades, and valves, to protect worn areas and reduce turbulence. They’re also used on heat exchangers, condensers, and chutes. The size listed is the combined total of the two parts.

Loctite® Nordbak Brushable Ceramic can be used outdoors, but may chalk with exposure to sunlight. Apply with a brush, roller, or sprayer.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.

Devcon Plastic Steel surface fillers can repair areas where brazing and welding is impractical.

NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.

Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.