We will reply to your message within an hour.
Secure circuit breaker switches that don’t have a hole for a padlock.
Lockout works with most 120V AC circuit breakers that have a hole through the breaker lever.
Suitable for most major multipole breakers that have a tie bar, including GE, ITE, Sylvania, Challenger, Bryant, Westinghouse, Square D, and General Switch Co.
Secure a single breaker switch with multiple padlocks, so electricity stays safely off until everyone's done working.
Use the thumb wheel to install this lockout on circuit breakers with tie bars that are mounted on DIN rails.
Use the push-button end to easily install this lockout on circuit breakers with pin lockout holes on the outside of the circuit-breaker toggle switch that are mounted on DIN rails.
Use the push-button end to easily install these lockouts on circuit breakers with pin lockout holes on the inside of the circuit-breaker toggle switch that are mounted on DIN rails.
Stop gas and fluid valve handles from opening and closing during maintenance.
In addition to a hasp that interlocks when closed, lockout has an adapter to lock out a valve and a chain that attaches to equipment so it won't get lost.
A hinged design makes mounting these lockouts easy.
Each lockout rotates into itself, making installation in tight spaces easier than other lockouts.
Use these lockouts to prevent valve handles from turning.
Close your valve, remove the handle, and store the handle in the lockout's zippered pouch. The lockout fits around the pipe, covers the valve stem, and secures the pouch's zipper to prevent valve operation.
Lock out a single energy control on machinery and electrical equipment so it can't be used.
Lockouts come in different colors for easy identification and to help meet OSHA standards. The label is permanently attached to record employee name and department.
Made entirely from nonconductive plastic for excellent electrical insulation.
Same as our other low-profile lockout hasps, but with an attached label to record employee name and department.
With a smaller overall length, these lockout hasps fit in tighter spaces than other lockout hasps yet still hold a similar number of locks.
These have a chain to attach to equipment so they won't get lost.
Like two lockout hasps in one, there's a jaw at each end with different clearances for added versatility.
The overlapping hasp interlocks when closed for added security.
The fold-over closing design hinders prying, while a slot instead of holes makes it easy to install multiple padlocks.
The fold-over closing design hinders prying.
In addition to an overlapping hasp that interlocks when closed, lockouts have a chain that attaches to equipment so they won't get lost.
Place a plug into the cylinder and padlock so the plug can't be used.
These lockouts plug into standard two- and three-prong plugs and lock with keys so the plug can't be used.
Mount near machines your team is repairing to lock them out with fewer padlocks.
Lock out a machine with fewer padlocks when a team is working.
Carry these boxes from job to job and mount them near equipment to lock out valves, electrical controls, and other machines with fewer padlocks, saving your team time.
Lock out the on/off or emergency-stop buttons on machinery to prevent accidental or unauthorized startups, such as during maintenance.
After locking, pull the cable tight for a secure fit.
Extend the cable and place its loop in the body opening. Rotate the body to lock the cable for a secure fit. When unlocked, the cable retracts into the body with the push of a button.
Thread the free end of the cable through the looped end and into the lockout clamping hole; pull tight and close handle to pinch the cable for a secure fit.
Mount this lockout over toggle- and rocker-style wall switches to make the switch inaccessible.
Lock out hoist controls, large electrical connectors, and other odd-sized controls.
Isolate air-powered equipment from a compressed air source.
Prevent cranes, hoists, and other machinery controlled by pendant switches from starting up during maintenance.
Padlock these lockouts over the ends of battery cables to keep forklifts, pallet jacks, and other machinery powered off during maintenance.
Prohibit access to the main valve on a gas cylinder.
Lock pipe blinds in place to prevent gas, steam, or chemicals from flowing through your line. These lockouts block access to flange bolts, keeping your team safe during pipeline maintenance.
Sets contain items for group electrical and valve lockouts and are furnished in a yellow plastic case that mounts to the wall to keep the items organized in a central location.
Sets contain items for group lockouts and are furnished in a yellow plastic case that mounts to the wall to keep the items organized in a central location.
Sets come with red padlocks and hasps, as well as tags and a waist pouch.
Sets include a variety of electrical and valve lockouts as well as padlocks.
Keep padlocks, tags, and other lockout tools neatly stored and ready for use in these easy-to-spot stations.
Turn the padlock eye to fasten these hasps without a padlock.
Install these hasps over a cam lock and secure them with a padlock to increase security on cabinets and chests.
The steel housing conceals the mounting bolts and included padlock for extra security, preventing others from prying it open.
Mount these padlockable eyes to the front of a door and door frame.
Mount these padlockable eyes on the inside edge of a door and door frame.
Mount these hasps around complex curves, angles, and corners that other corner hasps can't reach.
Designed for use with cut-resistant padlocks, these hasps have a padlock shackle protector on the strike plate for added cut and pry resistance.
For extra security, these brackets mount to a cam lock or latch without a handle so you can add a padlock.
Find the key blanks you need to duplicate keys for padlocks, cabinet doors, and locksets.
Replace individual and get master padlock keys.
For extra security and weather resistance, enclose your keyed padlock in one of these hardened steel guards.
Slide these shims between the padlock shackle and body to open most locks that are damaged or missing keys.
Secure tools and equipment with any style of padlock.
Add a photo in the designated square to identify the employee working a job.
Wrap these labels around padlocks to comply with lockout/tagout procedures.
Identify equipment by engraving or stamping one of these sturdy metal tags and hanging it with a wire.
Cover a steering wheel to communicate when equipment is out of service.
Cut through hard metal bolts, chain, and padlocks with these cutters.
Make repeated cuts in hard materials with cutters that mount for stability and provides extra leverage.
Block the rungs on a ladder with these lockout signs to prevent unauthorized climbing.