Also known as paddle locks, these are often used on electrical panels and cabinets. Quickly push the locks closed to secure doors. A convenient alternative to cam and draw locks, they don’t require you to turn a cam or pull a latch to close. All are keyed alike, choose them if you need several locks that open with the same key.

Style 5 locks meet UL 94 HB standards for flammability.

Style 6 locks have an interior release handle to keep someone from getting locked inside an enclosure if the door closes.

Mount Style 7, 8, and 9 locks by simply pressing them into cutouts—there’s no need to fasten them with a screw. All require a special cutout shape.

For technical drawings and 3-D models, click on a part number.

Also known as compression cams, these latches have an adjustable screw instead of a standard cam, so you can easily adjust the latching distance and tension over time. Press the button and the handle pops open; fold the handle into the recess to keep it out of the way and to secure the latch.

Nylon plastic latches withstand damp and humid environments.

For technical drawings and 3-D models, click on a part number.

Prevent water, dust, and dirt from getting into a sealed enclosure through the latch. These latches have a gasket that helps maintain an enclosure’s IP65 and NEMA 4 rating. Press the button and the handle pops out; push the handle shut for a secure hold. When you shut the handle, a lever raises to press the door or drawer closed. Because of this design, these latches are also called compression cam latches. Turn the screw to adjust the latching distance and tension over time. The handle folds into a recessed position to stay out of the way.

Latches with a color-revealing indicator let you quickly see if they’ve been opened. When the lock has been opened, the indicator turns red. These work great if you have many cabinets that need to be restocked throughout the day, so others know right away if the cabinet has been opened. Use an indicator reset key (sold separately) to change the indicator from red to green.

For technical drawings and 3-D models, click on a part number.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use. Often used on cabinet doors and file drawers, these latches have a metal arm that swings to lock. All can be adjusted to a range of latching distances, which is useful if you don’t know the precise measurements. When mounting the cam, adjust the latching distance and choose your turn direction.

Zinc latches have a reversible offset cam that can be mounted in two different ways, which means these latches have two different latching distance ranges.

Nylon plastic latches withstand damp and humid environments.

For technical drawings and 3-D models, click on a part number.

A gasket helps keep dust and low-pressure washdowns from entering through these locks. This helps you maintain your sealed enclosure's IP or NEMA rating. Press the button to pop the handle out; push the handle shut for a secure hold. When you shut the handle, a lever raises to press your door closed with the attached screw. Also known as compression cam locks, the lever on these locks creates a tighter hold than traditional cam locks, making them useful for doors that have a seal. Turn the screw on the lever to adjust the latching distance and tension over time. When not in use, fold the handle into its recessed position to keep it out of the way. Choose these locks if you need several locks that open with the same key.

Locks with a color-revealing indicator let you quickly see if they’ve been opened. When the lock has been opened, the indicator turns red. These work great if you have many cabinets that need to be restocked throughout the day, so others know right away if the cabinet has been opened. Use a special indicator reset key (sold separately) to change the indicator from red to green.

For technical drawings and 3-D models, click on a part number.

Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Choose them if you need several locks that open with the same key. Select the turn direction when mounting the cam. Each lock comes with a reversible offset cam to provide variable latching-distance ranges depending on the cam position.

For technical drawings and 3-D models, click on a part number.

Press the button and the handle snaps open; push the handle shut for a secure hold. Also known as compression cam latches, these locks anchor your door shut using a lever with a screw at the end instead of a standard cam. Turn the screw to adjust the latching distance and tension. The handle folds into a recessed position to stay out of the way. Choose them if you need several locks that open with the same key.

Nylon plastic locks work well in damp and humid environments. They have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder, preventing internal damage.

For technical drawings and 3-D models, click on a part number.

To help maintain a sealed enclosure's IP65 and NEMA 4 rating, these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. They also help keep out dust, dirt, and precipitation. Press the button to pop the handle out; push the handle shut for a secure hold. Since they lock with a hex key, these locks are great if you want to secure an enclosure with a simple keying system. When you shut the handle, a lever raises to press your door or drawer closed with an attached screw. Also known as compression cam locks, their lever creates a tighter seal than a rotating cam, so they're better at reducing rattling from vibration. Turn the screw on the lever to adjust the latching distance and tension over time. These locks have a flush design and their handle folds into a recessed position, so they stay out of the way. However, they might extend further into your enclosure than locks with a standard profile.

Locks with a color-revealing indicator let you quickly see if they’ve been opened. When the lock has been opened, the indicator turns red. These work great if you have many cabinets that need to be restocked throughout the day, so others know right away if the cabinet has been opened. Use a special indicator reset key (sold separately) to change the indicator from red to green.

For technical drawings and 3-D models, click on a part number.

Help maintain your sealed enclosure’s IP65 and NEMA 4 ratings—these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. They also keep out dust, dirt, and precipitation. Press the button to pop the handle out; push the handle shut for a secure hold. When you shut the handle, a lever raises to press the door closed with an attached screw. These locks close with a slotted screwdriver, so they’re ideal for keeping a simple keying system.

Also known as compression cam locks, their lever creates a tighter seal than a rotating cam, so they’re better at reducing rattling from vibration. Turn the screw on the lever to adjust the latching distance and tension over time. These locks have a flush design and their handle folds into a recessed position, so they won’t catch clothes or other items that pass by. However, they might extend further into your enclosure than locks with a standard profile.

These locks have an indicator that changes from green to red when they’ve been opened. They’re great if you have multiple cabinets that need to be restocked throughout the day, so others can quickly see if the cabinet is unlocked. Change the indicator back to green with a reset key (sold separately).

For technical drawings and 3-D models, click on a part number.

Secure these locks with a Phillips screwdriver to keep a simple keying system around your facility. To open, press the button to pop the handle out; push the handle shut to close. When you push the handle, a lever raises to press your door or drawer closed with an attached screw. Also known as compression cam locks, the lever on these locks creates a tighter seal than a rotating cam, so they’re better at reducing rattling from vibration. Turn the screw on the lever to adjust the latching distance and tension over time. To help your sealed enclosure maintain its IP65 and NEMA 4 rating, these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. They also help keep out dust, dirt, and precipitation. These locks have a flush design and their handle folds into a recessed position, so they stay out of the way. However, they might extend further into your enclosure than locks with a standard profile.

For technical drawings and 3-D models, click on a part number.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount this latch vertically or horizontally. It has two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.

For technical drawings and 3-D models, click on a part number.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount these latches vertically or horizontally. They have two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.

Choose keyed alike locks when you need several locks that open with the same key.

Keyed differently locks each open with a different key.

For technical drawings and 3-D models, click on a part number.