Thread the stud into the tool's spindle and then press the sanding disc onto the backup pad.

When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.

Thicker, more flexible, and less aggressive than standard nylon mesh discs, use these for sanding on curved or delicate surfaces.

Mount the same disc to a variety of tools—use the hole to attach to an arbor or the hook and loop backing to attach to a backup pad.

Made of foam, these discs can conform to contoured shapes, corners, and sharp edges.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

These discs have multiple layers of brick-shaped abrasive arranged in a pattern to create highly consistent finishes.

Coated with either ceramic alumina or a premium form of aluminum oxide, these discs last longer, cut faster, and produce a more consistent finish than standard hook and loop discs.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

For use with vacuum sanders, these discs have holes that allow dust to get sucked up before it can build up and dull the abrasive surface.

Holes allow dust removal when used with a vacuum sander.

When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

Coated with zirconia alumina to stay sharper longer.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Holes allow dust removal when used with a vacuum sander.

For use with vacuum sanders, these discs have holes that allow dust to get sucked up before it can build up and dull the abrasive surface.

Holes allow dust removal when used with a vacuum sander.

Thicker, more flexible, and less aggressive than standard nylon mesh discs, use these for sanding on curved or delicate surfaces.

The nylon mesh on these discs is embedded with precision-shaped ceramic alumina, which cuts through hard metals like stainless steel faster than other forms of ceramic alumina because of its sharp, outwardly pointed grit.

The heavy duty construction provides more support than standard discs for heavy material removal.

The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.

A special fastener on the back of these discs allows you to easily swap one disc for another.

From rough sanding to smooth finishing, these disc assortments include a variety of grits to meet your needs. All include discs with aluminum oxide abrasive, which is the most common for general sanding.

The premium abrasive stays sharp longer.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

A special fastener on the back of these discs allows you to easily swap one disc for another.

When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.

Remove rust and corrosion from surfaces that have protruding studs, such as brake hubs and flanges, without damaging the stud's threads.

The abrasive flaps wrap around the outer edge of these discs to reach in and sand welds at right angles (fillet welds).

Dust and debris won't build up on the abrasive surface.

Use these rolls to create consistent finishes on hard metals such as stainless steel, iron, and nickel.

Peel and stick these sheets to your detail sander whenever it’s time for fresh grit.

Peel and stick to your file handle. When it’s time to change the sheet, peel it off.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.