Push a button or flip a toggle switch to start or stop flow. Often used in testing and sampling, these valves are useful when you need to dispense a small amount of liquid.

Nickel-plated brass valves resist corrosion better than plain brass valves.

Push-button valves automatically open or close when you take your finger off the button. They’re ideal for intermittent use and applications where you want to monitor flow closely to avoid spills. The button is colored to make it easy to tell different valves apart. Normally open valves close when you push their button. Normally closed valves open when you push their button.

Toggle valves stay open until you flip them closed. Since they don't need to be held open, they’re often used to dispense larger samples than push-button valves. You can see if these valves are open or not based on the toggle's position.

Valves with an exhaust port release extra air or liquid when they close. When these valves open, the exhaust port closes.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Start or stop flow with the flip of a toggle switch or the push of a button. These valves are often used in testing and sampling applications where you need to dispense a small amount of liquid. They fit through a cutout, so the body of the valve stays safe inside your instrumentation panel.

Nickel-plated brass valves resist corrosion better than plain brass valves. 316 stainless steel valves stand up to corrosion better than both plain and nickel-plated brass valves.

Manual-return valves stay open until you flip the toggle off. Since they don't need to be held open, they’re often used to dispense larger samples than spring-return valves. It’s also easy to check if these valves are open or not based on the toggle’s position. Spring-return valves automatically close when you release the toggle or push button. They’re ideal for intermittent use and precise flow control to prevent spills.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Make connections from any direction—the body of these valves swivels 360° for easy installation. Often used in testing and sampling applications, they quickly open and close with a toggle or button.

Toggle-switch valves stay open until you flip them closed. Since they don’t need to be held open, they’re often used to dispense large samples. The toggle’s position shows you if they’re open or closed.

Push-button valves open when you press the button. When released, the button springs back and automatically stops flow. They’re ideal for intermittent use and controlling flow to avoid spills.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.