Methyl Chloride Oilers | McMaster-Carr

Filter by

For Use With

Housing Material

Power Source

Container Size

For Drum Opening Pipe Size

Drum Pump Type

Intake Tube Material

Flow Rate

Discharge Location

Discharge Pipe Size

Wetted Parts Material

Spout Material

Pump Type

Voltage

Discharge Connection Port

Discharge Connection

Maximum Flow Rate

Piston Material

Intake Pipe Size

Shaft Diameter

REACH Compliance

DFARS Compliance

RoHS Compliance

Forward

How can we improve?

37 Products

How to Prime Your Pump

How to Determine Feet of Head

About Process Pumps

About Drum Pumps

With Stainless Steel Intake Tube and Housing

These pumps have a selectable flow rate, so you can adjust flow for different dispensing applications. A lever handle maximizes output with each stroke for low-effort dispensing.

Whenever working with flammable liquids, always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.

			Temp. Range, °F				Intake
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	For Discharge Tube ID	Spout Type		Each
Stainless Steel Intake Tube and Housing
6, 8, 10, 12	15-55	2,000	Not Rated	140°	1 1/2 NPT, 2 NPT	Drum Connector	1 1/8"	18 1/2"-32 1/2"	11/16"	Removable	0000000	0000000

Hazardous Location Electric Drum Pumps for Water, Oil, Coolants, and Chemicals

These pumps quickly empty drum contents by moving 48 gallons of liquid per minute. They are often used with lubricating oil as well as with chemicals such as detergents and etching and cleaning solutions. Their electric motors are explosion proof and UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Division 2, Groups F and G environments where flammable gases and combustible dust may be present.

Pumps
				Temp. Range, °F					Intake		Discharge					Maintenance Parts
Flow Rate, gpm	Discharge Pressure, psi	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	For Drum Opening Size	Tube OD	Tube Lg.	Tube Connection Type	For Tube ID	Thermal Protection		Each
120V AC, Single Phase
Hardwire
48.5	14	55	300	-40°	210°	1/2 hp	5.3	41 mm	1 5/8"	39"	Barbed	1"	With Thermal Overload Protection	00000000	000000000	00000000

Electric Drum Pump Systems for Water, Oil, Coolants, and Chemicals

Including nozzles and connectors, these pumps come with everything you need to start pumping. All include a pump assembly, 1" ID hose, dispensing nozzle, drum connector, and storage bracket.

Pumps with a 316 stainless steel housing are often used with fuel, acetone, methyl ethyl ketone (MEK), xylene, and mineral spirits. Their motors are rated IP55 and are CSA certified for use in Class I, Divisions 1 and 2, Group D hazardous environments with flammable gases and vapors.

For technical drawings and 3-D models, click on a part number.

				Temp. Range, °F					Intake		Discharge
Flow Rate, gpm	Discharge Pressure, psi	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	For Drum Opening Size	Tube OD	Tube Lg.	Tube ID	Tube OD	Tube Lg.	Environmental Rating		Each
120V AC, Single Phase—Hardwire
316 Stainless Steel Housing
18	15	55	1,000	Not Rated	175°	1 1/3 hp	9.1	2 NPT	1 1/2"	39"	1"	1 1/4"	72"	NEC Class I Divisions 1, 2 Group D IP55	0000000	000000000

Air-Powered Drum Pumps for Water, Oil, Coolants, and Chemicals

These pumps have a nonsparking air-powered motor for applications where electricity is unavailable or dangerous. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump. They're often used with ammonia, etching and cleaning solutions, and other caustics.

With NPT Discharge

			Temp. Range, °F						Air Connection			Intake		Discharge (Pump Body)
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure Range, psi	Air Consumption, cfm	For Drum Opening Size	Includes	Pipe Size	Gender	Thread Type	Tube OD	Tube Lg.	Pipe Size	Gender	Thread Type		Each
14	55	1,500	-30°	300°	40-80	27	2 NPT	Drum Connector	1/8	Female	NPT	1 1/2"	39"	3/4	Female	NPT	00000000	0000000

Air-Powered Drum Pumps with Hose and
Filter/Lubricator for Water, Oil, Coolants, and Chemicals

A filter/lubricator ensures efficiency and reduces wear on the pump. They have a chemically resistant seal for use with hydraulic oil and motor oil in addition to acidic and alkaline liquids such as ammonia and etching and cleaning solutions. Pumps have a nonsparking motor for use in applications where electricity is unavailable or dangerous.

			Temp. Range, °F						Air Connection			Intake		Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure Range, psi	Air Consumption, cfm	For Drum Opening Size	Includes	Pipe Size	Gender	Thread Type	Tube OD	Tube Lg.	Tube ID	Tube Lg., ft.	Features		Each
16	55	2,000	-20°	150°	80-100	32	2 NPT	Drum Connector	1/4	Female	NPT	1 1/2"	40"	1"	5	15-ft. Air Hose Assembly, Air Filter/Lubricator, Ball Valve, Muffler	0000000	000000000

Coupling Insert	Each	000000
Repair Kit for Pumps with 16 gpm Flow Rate	Each	000000
Half Coupling for Pumps with 16 gpm Flow Rate	Each	00000

Air-Powered Drum Pumps for Flammable Liquid

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone (MEK), xylene, and mineral spirits. Motor is nonsparking for use in applications where electricity is unavailable or dangerous. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.

For technical drawings and 3-D models, click on a part number.

			Temp. Range, °F						Air Connection			Intake		Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure Range, psi	Air Consumption, cfm	For Drum Opening Size	Includes	Pipe Size	Gender	Thread Type	Tube OD	Tube Lg.	Tube Connection Type	For Tube ID		Each
26	55	1,100	-40°	210°	44-87	53	2 NPT	Drum Connector	3/8	Female	NPT	1 5/8"	39"	Barbed	1"	0000000	000000000
26	55	1,100	-40°	210°	44-87	53	2 NPT	Drum Connector	3/8	Female	NPT	1 5/8"	47"	Barbed	1"	0000000	00000000
53	55	1,000	-40°	210°	44-87	53	2 NPT	Drum Connector	3/8	Female	NPT	1 5/8"	39"	Barbed	1"	0000000	00000000
53	55	1,000	-40°	210°	44-87	53	2 NPT	Drum Connector	3/8	Female	NPT	1 5/8"	47"	Barbed	1"	0000000	00000000

Replacement Hand Wheel	0000000	Each	000000
Replacement Coupling Kit	0000000	Each	00000

PVDF Extended-Life Air-Powered Drum Pumps for Chemicals

A chemical- and impact-resistant PVDF housing stands up to aggressive chemicals such as methyl ethyl ketone (MEK) and xylene. Also known as diaphragm pumps, they have few moving parts that can fail for a long service life. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Repair kits include O-rings, valves, and diaphragms.

			Temp. Range, °F					Air Connection			Intake				Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, cfm	For Drum Opening Size	Pipe Size	Gender	Thread Type	Pipe Size	Gender	Thread Type	Tube Lg.	Pipe Size	Gender	Thread Type		Each
13	55	3,000	40°	210°	100	12	2 NPT	1/4	Female	NPT	1/2	Female	NPT	36"	1/2	Female	NPT	0000000	000000000

Repair Kit

00000000

Each

0000000

316 Stainless Steel Air-Powered Transfer Pumps
for Chemicals, Fuel, and Flammable Liquids

With a 316 stainless steel housing and a PTFE diaphragm, these pumps resist a variety of acids, alkalies, and flammable liquids such as phosphoric acid, acetone, and methyl ethyl ketone (MEK). They're designed for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.

Fluid-side maintenance kits include diaphragms, check valve balls, and seals.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

For technical drawings and 3-D models, click on a part number.

Threaded Bottom Intake and Top Discharge

	Max. Flow Rate, gpm								Overall
Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Viscosity, cP	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
289 Max. ft. of Head—125 psi Max. Discharge Pressure
15	12	10	7	10,000	20	1/4 Female	1/2 Female	1/2 Female	9"	10"	10"	00000000	000000000
45	38	30	19	20,000	40	1/2 Female	1 Female	1 Female	13"	10"	13"	00000000	00000000
106	77	62	45	30,000	50	3/4 Female	1 1/2 Female	1 1/2 Female	15"	17"	22"	00000000	00000000
150	104	76	53	40,000	100	3/4 Female	2 Female	2 Female	15"	17"	26"	00000000	00000000
235	174	127	90	50,000	140	3/4 Female	3 Female	3 Female	17"	20"	32"	00000000	000000000

Fluid-Side Maintenance Kit for 41655K32	Each	000000000
Air-Motor Maintenance Kit for 41655K29, 41655K31, 41655K32	Each	000000
Air-Motor Maintenance Kit for 41655K27	Each	000000
Fluid-Side Maintenance Kit for 41655K27	Each	000000
Fluid-Side Maintenance Kit for 41655K31	Each	00000000
Air-Motor Maintenance Kit for 41655K28	Each	000000
Fluid-Side Maintenance Kit for 41655K28	Each	000000
Fluid-Side Maintenance Kit for 41655K29	Each	00000000

Self-Priming Stainless Steel Circulation Pumps for Chemicals

Self-priming up to 6 ft., these pumps have a stainless steel housing sealed with PTFE to resist chemicals such as ammonia and detergents as well as harsh solvents including methyl ethyl ketone (MEK). The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Pumps are self-priming after you fill the pump chamber with liquid. As liquid in the chamber is expelled, a suction force is created which allows the pump to draw liquid upward.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry. If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

		Flow Rate, gpm										Intake (NPT)		Discharge (NPT)		Overall
	Max. Flow Rate, gpm	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity, cP	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each
120/240V AC, Single Phase—With Thermal Overload Protection
Hardwire
1	68	54	41	__	__	__	50	75	20	3/4	9/5	1 1/2	Female	1 1/2	Female	15 3/4"	8 3/4"	9 1/2"	0000000	000000000
2	100	__	65	45	__	__	50	75	20	1 1/2	18/9	1 1/2	Female	1 1/2	Female	16 1/2"	8 3/4"	9 1/2"	0000000	00000000
240/460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
3	68	54	41	__	__	__	50	75	20	3/4	3/2	1 1/2	Female	1 1/2	Female	15 1/4"	8 3/4"	9 1/2"	0000000	00000000
4	100	__	65	45	__	__	50	75	20	1 1/2	5/3	1 1/2	Female	1 1/2	Female	16 1/4"	8 3/4"	9 1/2"	0000000	00000000
5	132	__	__	82	60	14	63	75	20	2	6/3	1 1/2	Female	1 1/2	Female	17 1/4"	8 3/4"	9 1/2"	0000000	00000000

Constant-Flow-Rate Pumps without Motor for Chemicals

With a 316 stainless steel housing and stainless steel gears, these pumps are often used to dispense chemicals such as ethylene glycol, isopropyl alcohol, and nitric acid. Use an electric motor with a coupling and belt/pulley drive. Also known as gear pumps, they produce a smooth flow of liquid. All are self-priming, which means they create a suction force to draw liquid upward and fill the pump chamber. Do not use with solids.

For technical drawings and 3-D models, click on a part number.

					Required hp		Intake (NPT)		Discharge (NPT)		Overall			Shaft
Max. Flow Rate @ 25 psi, gpm	Max. Flow Rate, gpm	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity, cP	@ 25 psi	@ 100 psi	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.	Dia.	Lg.	Center-to-Base Lg.		Each
4.3	4	346.3	150	20,000	1/4	3/4	1/2	Female	1/2	Female	6 1/4"	3"	3 3/4"	1/2"	1 1/4"	2 5/8"	00000000	000000000
10.2	10	346.3	150	20,000	1/2	1 1/2 hp	3/4	Female	3/4	Female	7 1/2"	3 3/8"	4 3/8"	5/8"	1 3/4"	3"	00000000	00000000