Use this conductive hose in a grounded system to eliminate static buildup. The material is blended with carbon black, which conducts static charges away from the hose walls.

Heat chemicals to prevent them from freezing or becoming too thick. With a self-regulating heating wire, the liquid inside this hose stays warm and keeps flowing.

Step on this hose and it springs back to its original shape.

Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

No need for a gasket—this hose’s PTFE liner flares out as it passes through the flanges, so your line’s contents never touch the fittings.

With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.

Transfer fuel oil with a hose that stays flexible in subzero conditions.

Made of plastic, these fittings are lighter in weight than metal barbed fittings, yet have the chemical and corrosion resistance to stand up to harsh substances. Slide the barbed end into plastic or rubber hose and secure with a clamp.

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

Quickly connect and disconnect hose lines used with a variety of chemicals, from adhesives to isopropyl alcohol and ink. Any part of these couplings that contacts fluid is made from 316 stainless steel, C-276 Hastelloy, PTFE, or fluoroelastomer to withstand the chemicals in your line.

Access your line without twisting the hose—these unions separate into three pieces.

Minimize chemical and petroleum spills during accidental disconnects, such as a driver pulling away during loading. These couplings have a shut-off valve on each half to stop flow when they’re separated.

Dispense chemicals from a line that attaches and detaches from your drum or intermediate bulk container (IBC) in seconds. These nozzles and the included hose come with fittings that connect when you insert the plug into the socket and push the levers down.

Use this resilient tubing in high-temperature chemical applications up to 400° F.

Run chemicals through this tubing at temperatures between -100° F and 500° F.

The corrugated design allows this tubing to extend and compress just like an accordion.

You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.

This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals.

This tubing can withstand high-temperature chemical applications up to 400° F.

This tubing can handle the highest temperatures of all of our fuel and lubricant tubing. Use it in applications up to 450° F.

Hard walls give this tubing the strength to handle high-pressure fuel and gasoline applications.

With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.

When your application does not require a smooth interior, this tubing is an economical choice.

A titanium additive gives this tubing excellent strength and superior corrosion resistance. It meets MIL-T-8808.

This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside.

Also known as hypodermic or needle tubing, this tubing has thin walls and is made to tight tolerances for use in precision applications.

The outside of this tubing is polished to a high-luster finish for a shiny appearance.

Aluminum tubing is lightweight with good corrosion resistance and weldability.

Unlike other aluminum tubing, this tubing is rigid and will not bend.

Copper tubing has good corrosion resistance and excellent heat transfer qualities.

Seamless construction with no weld bead gives this tubing an interior with unrestricted flow. It can be flared without splitting.

This tubing can withstand temperatures up to 1200° F—the highest temperature rating of all the non-stainless steel tubing we offer. It is also known as Inconel.

Build a compressed air system in half the time it would take to build a copper or steel system.

Kits contain lengths of hose, nozzles, valves, and caps.

Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.

Kit contains lengths of hose, nozzles, connectors, and assembly pliers.

These dispensers have a reservoir and controls for coolant flow.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

For high-pressure coolant lines, these nozzles withstand pressure up to 500 psi.

Press these nozzles into unthreaded holes.