About Plastic
More
About Plain Bearings
More
Oil-Filled Slippery UHMW Polyethylene Rods
- Color: Gray
- Temperature Range: -450° to 180° F
- Tensile Strength: 3,000-5,500 psi (Poor)
- Impact Strength: No Break (Excellent)
- Hardness: Durometer 62D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: ASTM D4020, MIL-P-21922, UL 94 V-2
Often used as rollers, these oil-filled UHMW rods are self-lubricating for an extra-slippery surface that resists wear. They also offer excellent impact resistance.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Lengths, ft. | Per Ft. | |
| 1" | 0" to 0.06" | 0000000 | 00000 | |
| 1 1/8" | 0" to 0.06" | 0000000 | 00000 | |
| 1 1/4" | 0" to 0.06" | 0000000 | 00000 | |
| 1 3/8" | 0" to 0.06" | 0000000 | 00000 | |
| 1 1/2" | 0" to 0.06" | 0000000 | 00000 | |
| 1 3/4" | 0" to 0.06" | 0000000 | 00000 | |
| 2" | 0" to 1/8" | 0000000 | 00000 | |
| 2 1/4" | 0" to 1/8" | 0000000 | 00000 | |
| 2 1/2" | 0" to 1/8" | 0000000 | 00000 | |
| 2 3/4" | 0" to 1/8" | 0000000 | 00000 | |
| 3" | 0" to 0.187" | 0000000 | 00000 | |
| 3 1/4" | 0" to 0.187" | 0000000 | 00000 | |
| 3 1/2" | 0" to 0.187" | 0000000 | 00000 | |
| 3 3/4" | 0" to 0.187" | 0000000 | 00000 | |
| 4" | 0" to 0.187" | 0000000 | 00000 | |
| 5" | 0" to 0.187" | 0000000 | 000000 |
Oil-Filled Slippery UHMW Polyethylene Sheets
- Color: Gray
- Temperature Range: -450° to 180° F
- Tensile Strength: 3,000-5,500 psi (Poor)
- Impact Strength: No Break (Excellent)
- Hardness: Durometer 62D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 177.1520, UL 94 HB
These oil-filled UHMW sheets are self-lubricating for an extra slippery surface. Often fabricated into chain guards, they have excellent wear and impact resistance.
For technical drawings and 3-D models, click on a part number.
| Thick. | Thick. Tolerance | Each | |
6" × 6" | |||
|---|---|---|---|
| 1/4" | -0.03" to 0.03" | 000000000 | 000000 |
| 3/8" | -0.03" to 0.03" | 000000000 | 00000 |
| 1/2" | -0.03" to 0.03" | 000000000 | 00000 |
| 3/4" | -0.03" to 0.03" | 000000000 | 00000 |
| 1" | -0.03" to 0.03" | 000000000 | 00000 |
| 1 1/2" | -0.03" to 0.03" | 000000000 | 00000 |
12" × 12" | |||
| 1/4" | -0.03" to 0.03" | 000000000 | 00000 |
| 3/8" | -0.03" to 0.03" | 000000000 | 00000 |
| 1/2" | -0.03" to 0.03" | 000000000 | 00000 |
| 3/4" | -0.03" to 0.03" | 000000000 | 00000 |
| 1" | -0.03" to 0.03" | 000000000 | 00000 |
| 1 1/2" | -0.03" to 0.03" | 000000000 | 000000 |
12" × 24" | |||
| 1/4" | -0.03" to 0.03" | 000000000 | 00000 |
| 3/8" | -0.03" to 0.03" | 000000000 | 00000 |
| 1/2" | -0.03" to 0.03" | 000000000 | 00000 |
| 3/4" | -0.03" to 0.03" | 000000000 | 000000 |
| 1" | -0.03" to 0.03" | 000000000 | 000000 |
| 1 1/2" | -0.03" to 0.03" | 000000000 | 000000 |
12" × 36" | |||
| 1/4" | -0.03" to 0.03" | 000000000 | 00000 |
| 3/8" | -0.03" to 0.03" | 000000000 | 000000 |
| 1/2" | -0.03" to 0.03" | 000000000 | 000000 |
| 3/4" | -0.03" to 0.03" | 000000000 | 000000 |
| 1" | -0.03" to 0.03" | 000000000 | 000000 |
| 1 1/2" | -0.03" to 0.03" | 000000000 | 000000 |
24" × 48" | |||
| 1/4" | -0.03" to 0.03" | 000000000 | 000000 |
| 3/8" | -0.03" to 0.03" | 000000000 | 000000 |
| 1/2" | -0.03" to 0.03" | 000000000 | 000000 |
| 3/4" | -0.03" to 0.03" | 000000000 | 000000 |
| 1" | -0.03" to 0.03" | 000000000 | 000000 |
| 1 1/2" | -0.03" to 0.03" | 000000000 | 000000 |
48" × 60" | |||
| 1/4" | -0.03" to 0.03" | 000000000 | 000000 |
| 3/8" | -0.03" to 0.03" | 000000000 | 000000 |
| 1/2" | -0.03" to 0.03" | 000000000 | 000000 |
| 3/4" | -0.03" to 0.03" | 000000000 | 000000 |
| 1" | -0.03" to 0.03" | 000000000 | 00000000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface. All are FDA Compliant, so they're safe for use in food applications.
UHMW bearings resist chemicals better than 841 bronze bearings, and they retain oil better in wet environments. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings  | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||||||
| 3/8" | 5/16" | 1/2" | 1/16" | 19 lbs. @ 120 rpm | 18 lbs. @ 120 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
| 3/8" | 3/8" | 1/2" | 1/16" | 23 lbs. @ 120 rpm | 18 lbs. @ 120 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 |
For 3/8" Shaft Dia. | ||||||||||||
| 1/2" | 1/4" | 11/16" | 1/16" | 15 lbs. @ 120 rpm | 24 lbs. @ 120 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 |
| 1/2" | 3/8" | 5/8" | 1/16" | 23 lbs. @ 120 rpm | 20 lbs. @ 120 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 |
For 1/2" Shaft Dia. | ||||||||||||
| 5/8" | 1/4" | 7/8" | 1/16" | 15 lbs. @ 120 rpm | 29 lbs. @ 120 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 |
| 5/8" | 3/8" | 7/8" | 1/8" | 23 lbs. @ 120 rpm | 29 lbs. @ 120 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 |
| 5/8" | 1/2" | 3/4" | 1/16" | 31 lbs. @ 120 rpm | 20 lbs. @ 120 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 |
For 5/8" Shaft Dia. | ||||||||||||
| 3/4" | 3/8" | 15/16" | 1/16" | 47 lbs. @ 60 rpm | 50 lbs. @ 60 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 |
For 3/4" Shaft Dia. | ||||||||||||
| 7/8" | 1/2" | 1 1/8" | 1/8" | 60 lbs. @ 60 rpm | 60 lbs. @ 60 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
For 1" Shaft Dia. | ||||||||||||
| 1 3/32" | 1 1/16" | 1 1/2" | 1/16" | 130 lbs. @ 60 rpm | 80 lbs. @ 60 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
For 1 1/4" Shaft Dia. | ||||||||||||
| 1 11/32" | 1 5/16" | 1 7/8" | 1/16" | 330 lbs. @ 30 rpm | 205 lbs. @ 30 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
For 1 1/2" Shaft Dia. | ||||||||||||
| 1 5/8" | 1 9/16" | 2 1/4" | 1/16" | 390 lbs. @ 30 rpm | 250 lbs. @ 30 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |