About Rod Ends
More
Nylon-Coated Eyebolts—For Lifting
Route wire and cable through the smooth eye without snagging.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
Size | Lg. | Shank Lg. | Eye Dia. | Vertical Capacity, lbs. | Temperature Range, °F | Overall Lg. | Each | |
With Shoulder | ||||||||
Nylon-Coated Steel | ||||||||
| 1/4"-20 | 1" | 1" | 3/4" | 500 | 30° to 275° | 2 3/8" | 0000000 | 00000 |
| 5/16"-18 | 1 1/8" | 1 1/8" | 7/8" | 900 | 30° to 275° | 2 3/4" | 0000000 | 0000 |
| 3/8"-16 | 1 1/4" | 1 1/4" | 1" | 1,400 | 30° to 275° | 3 1/4" | 0000000 | 0000 |
| 7/16"-14 | 1 3/8" | 1 3/8" | 1 1/16" | 2,000 | 30° to 275° | 3 5/8" | 0000000 | 00000 |
| 1/2"-13 | 1 1/2" | 1 1/2" | 1 3/16" | 2,600 | 30° to 275° | 4" | 0000000 | 00000 |
| 9/16"-12 | 1 5/8" | 1 5/8" | 1 1/4" | 3,200 | 30° to 275° | 4 1/2" | 0000000 | 00000 |
| 5/8"-11 | 1 3/4" | 1 3/4" | 1 3/8" | 4,000 | 30° to 275° | 4 7/8" | 0000000 | 00000 |
| 3/4"-10 | 2" | 2" | 1 1/2" | 6,000 | 30° to 275° | 5 1/4" | 0000000 | 00000 |
| 7/8"-9 | 2 1/4" | 2 1/4" | 1 11/16" | 7,000 | 30° to 275° | 6" | 0000000 | 00000 |
| 1"-8 | 2 1/2" | 2 1/2" | 1 13/16" | 9,000 | 30° to 275° | 7" | 0000000 | 00000 |
Without Shoulder | ||||||||
Nylon-Coated Steel | ||||||||
| 1/4"-20 | 1" | 1" | 3/4" | 500 | 30° to 275° | 2 1/4" | 0000000 | 0000 |
| 5/16"-18 | 1 1/8" | 1 1/8" | 7/8" | 900 | 30° to 275° | 2 5/8" | 0000000 | 0000 |
| 3/8"-16 | 1 1/4" | 1 1/4" | 1" | 1,400 | 30° to 275° | 2 7/8" | 0000000 | 0000 |
| 1/2"-13 | 1 1/2" | 1 1/2" | 1 3/16" | 2,600 | 30° to 275° | 3 1/2" | 0000000 | 00000 |
| 5/8"-11 | 1 3/4" | 1 3/4" | 1 3/8" | 4,000 | 30° to 275° | 4 1/4" | 0000000 | 00000 |
| 3/4"-10 | 2" | 2" | 1 1/2" | 6,000 | 30° to 275° | 4 3/4" | 0000000 | 00000 |
Thread | With Shoulder | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Lg., mm | Shank Lg., mm | Eye Dia., mm | Vertical Capacity, lbs. | Temperature Range, °F | Overall Lg., mm | Each | |
Nylon-Coated Steel | |||||||||
| M6 | 1 | 12 | 12 | 19 | 450 | 30° to 275° | 47 | 0000000 | 000000 |
| M8 | 1.25 | 12 | 12 | 25 | 450 | 30° to 275° | 61 | 0000000 | 00000 |
| M10 | 1.5 | 20 | 20 | 28 | 1,625 | 30° to 275° | 75 | 0000000 | 00000 |
| M12 | 1.75 | 24 | 24 | 30 | 2,250 | 30° to 275° | 85 | 0000000 | 00000 |
| M12 | 1.75 | 76 | 76 | 30 | 2,250 | 30° to 275° | 137 | 0000000 | 00000 |
| M14 | 2 | 28 | 28 | 35 | 3,500 | 30° to 275° | 103 | 0000000 | 00000 |
| M16 | 2 | 32 | 32 | 35 | 3,500 | 30° to 275° | 106 | 0000000 | 00000 |
| M18 | 2.5 | 36 | 36 | 38 | 4,700 | 30° to 275° | 117 | 0000000 | 00000 |
| M20 | 2.5 | 40 | 40 | 43 | 6,275 | 30° to 275° | 135 | 0000000 | 00000 |
| M24 | 3 | 48 | 48 | 46 | 8,450 | 30° to 275° | 153 | 0000000 | 00000 |
| M30 | 3.5 | 60 | 60 | 55 | 14,075 | 30° to 275° | 194 | 0000000 | 00000 |
Routing Eyebolts with Nuts—Not for Lifting
Also known as nut eyebolts, these are designed for through-hole applications. Use them for routing wire and for other light duty applications.
Nylon plastic eyebolts won't conduct heat and electricity, preventing damage to your wire and cable. They are lightweight and corrosion-resistant.
Closed eyes are stronger than bent-closed eyes.
For technical drawings and 3-D models, click on a part number.
Thread | Nuts | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Lg. | Shank Lg. | Overall Lg. | Eye Dia. | Temp. Range, ° F | No. Included | Style | Pkg. Qty. | Pkg. | |
Closed Eye | ||||||||||
| 6-32 | 5/8" | 3/4" | 1 1/4" | 1/4" | -40° to 185° | 1 | Hex | 25 | 0000000 | 000000 |
| 8-32 | 1" | 1 1/8" | 1 5/8" | 1/4" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
| 10-24 | 7/8" | 1" | 1 3/4" | 3/8" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
| 1/4"-20 | 7/8" | 1" | 2" | 1/2" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
| 1/4"-20 | 1 1/4" | 1 1/2" | 2 1/2" | 1/2" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
| 1/4"-20 | 1 1/4" | 2" | 3" | 1/2" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
| 5/16"-18 | 7/8" | 1" | 2 1/4" | 5/8" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
| 5/16"-18 | 1 1/4" | 2" | 3 1/4" | 5/8" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
| 3/8"-16 | 7/8" | 1" | 2 1/2" | 3/4" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
| 3/8"-16 | 1 1/4" | 2" | 3 1/2" | 3/4" | -40° to 185° | 1 | Hex | 10 | 0000000 | 00000 |
| 3/8"-16 | 1 1/2" | 2 1/2" | 4" | 3/4" | -40° to 185° | 1 | Hex | 10 | 0000000 | 00000 |
| 3/8"-16 | 2 1/2" | 4" | 5 1/2" | 3/4" | -40° to 185° | 1 | Hex | 10 | 0000000 | 00000 |
Rope Guides
Use these guides to position a rope.
Nylon guides are lightweight as well as chemical and oil resistant. For better abrasion resistance, choose those with an 18-8 or 316 stainless steel liner.
Warning: Never use for lifting applications.
Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Rope Dia. | Capacity | Lg. | Inner Ht. | Overall Ht. | Thick. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | For Mounting Screw Size | Color | Each | |
For 1 Line | |||||||||||||
| 9/32" | Not Rated | 1 1/16" | 5/16" | 5/8" | 13/32" | No | 2 | 5/32" | 19/32" | 5/32" | Black | 00000000 | 00000 |
| 3/8" | Not Rated | 1 3/8" | 3/8" | 3/4" | 7/16" | No | 2 | 3/16" | 7/8" | No. 8 | Black | 0000000 | 0000 |
| 1/2" | Not Rated | 1 7/8" | 3/8" | 9/16" | 3/16" | No | 2 | 3/16" | 1 3/8" | No. 8 | Black | 0000000 | 000 |
| 1/2" | Not Rated | 1 7/8" | 3/8" | 9/16" | 3/16" | No | 2 | 3/16" | 1 3/8" | No. 8 | White | 0000000 | 000 |
| 5/8" | Not Rated | 1 7/8" | 5/8" | 1 1/4" | 13/16" | No | 2 | 1/4" | 1 3/8" | 1/4" | Black | 0000000 | 0000 |
Clamp-On Rope Guides
Clamp around a tube or pipe to guide a rope.
Warning: Never use for lifting applications.
| For OD | For Max. Rope Dia. | Lg. | Overall Ht. | Thick. | Color | Each | |
316 Stainless Steel and Nylon Plastic | |||||||
|---|---|---|---|---|---|---|---|
| 7/8"-1" | 11/16" | 2 13/16" | 1 5/8" | 7/16" | Black | 0000000 | 000000 |
Wraparound Rope Cleats
Wind rope around these cleats for a secure, temporary hold.
Bolt-on cleats have exposed fasteners that attach directly to the deck or other surface.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Max. Rope Dia. | Lg. | Overall Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Color | Each | |
Bolt-On | |||||||||
Nylon Plastic | |||||||||
| 1/4" | 3" | 11/16" | No | 2 | 5/32" | 1" | Black | 00000000 | 00000 |
| 5/16" | 4" | 7/8" | No | 2 | 5/32" | 1 1/8" | Black | 00000000 | 0000 |
| 3/8" | 5" | 1 1/16" | No | 2 | 7/32" | 1 7/16" | Black | 00000000 | 0000 |
| 7/16" | 6 1/2" | 1 3/8" | No | 2 | 7/32" | 1 11/16" | Black | 00000000 | 0000 |
Mounting Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Max. Rope Dia. | Lg. | Overall Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Color | Each | |
Bolt-On | |||||||||
Nylon Plastic | |||||||||
| 1/4" | 4 1/4" | 1" | No | 2 | 7/32" | 1 1/4" | Black | 000000000 | 00000 |
| 3/8" | 6 1/16" | 1 1/4" | No | 2 | 9/32" | 1 9/16" | Black | 000000000 | 0000 |
| 3/8" | 6 1/16" | 1 1/4" | No | 2 | 9/32" | 1 9/16" | White | 000000000 | 0000 |
| 1/2" | 8 1/16" | 1 3/4" | No | 2 | 5/16" | 2 1/4" | Black | 000000000 | 0000 |
| 5/8" | 9 7/8" | 1 13/16" | No | 2 | 5/16" | 3" | Black | 000000000 | 0000 |
Press-In Rope Cleats
Press rope into the gripping body of these cleats for a quick, temporary hold.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Webbing Guides
Use these guides to prevent webbing from twisting, or use as anchor points in tie-down applications. They are also known as footman's loops.
Nylon plastic guides are chemical and oil resistant, nonconductive, and lightweight.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Internally Threaded Chemical-Resistant Ball Joint Rod Ends
Made of impact-resistant nylon, these rod ends withstand corrosion as well as fuels, lyes, and weak acids. They are also 80% lighter than steel rod ends. A self-lubricating nylon ball provides maximum abrasion resistance and eliminates the need for lubrication.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Specifications Met | Choose a Shank Thread Direction | Each | |
| 10-32 | 3/16" | 25° | 5/8" | 5/16" | 1 1/16" | 1/2" | 65 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 00000 | |
| 1/4"-28 | 1/4" | 25° | 3/4" | 3/8" | 1 5/16" | 11/16" | 90 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 0000 | |
| 5/16"-24 | 5/16" | 25° | 7/8" | 7/16" | 1 3/8" | 11/16" | 110 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 0000 | |
| 3/8"-24 | 3/8" | 22° | 1" | 1/2" | 1 5/8" | 13/16" | 220 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 0000 | |
| 7/16"-20 | 7/16" | 22° | 1 1/8" | 9/16" | 1 13/16" | 15/16" | 270 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| 1/2"-20 | 1/2" | 22° | 1 5/16" | 5/8" | 2 1/8" | 1 1/16" | 330 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 00000 | |
| 5/8"-18 | 5/8" | 22° | 1 1/2" | 3/4" | 2 1/2" | 1 3/8" | 380 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| 3/4"-16 | 3/4" | 22° | 1 3/4" | 7/8" | 2 7/8" | 1 9/16" | 510 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M4 × 0.7 mm | 5mm | 15° | 18mm | 6mm | 27mm | 10mm | 65 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M5 × 0.8 mm | 5mm | 15° | 18mm | 6mm | 27mm | 10mm | 65 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M6 × 1 mm | 6mm | 14.5° | 20mm | 7mm | 30mm | 12mm | 90 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M8 × 1.25 mm | 8mm | 12.5° | 24mm | 9mm | 36mm | 16mm | 110 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M10 × 1.25 mm | 10mm | 12.5° | 30mm | 10mm | 43mm | 10mm | 220 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M10 × 1.5 mm | 10mm | 12.5° | 30mm | 10mm | 43mm | 10mm | 220 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M12 × 1.25 mm | 12mm | 12.5° | 34mm | 12mm | 50mm | 22mm | 270 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M16 × 1.5 mm | 16mm | 11.5° | 42mm | 15mm | 64mm | 28mm | 380 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M18 × 1.5 mm | 18mm | 11.5° | 46mm | 16mm | 71mm | 32mm | 510 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M20 × 2.5 mm | 20mm | 11.5° | 50mm | 18mm | 77mm | 33mm | 510 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
Chemical-Resistant Ball Joint Rod Ends
Made of impact-resistant nylon, these rod ends withstand corrosion as well as fuels, lyes, and weak acids. They are also 80% lighter than steel rod ends. A self-lubricating nylon ball provides maximum abrasion resistance and eliminates the need for lubrication.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Specifications Met | Choose a Shank Thread Direction | Each | |
| 10-32 | 3/16" | 25° | 5/8" | 5/16" | 1 1/4" | 3/4" | 15 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| 1/4"-28 | 1/4" | 25° | 3/4" | 3/8" | 1 9/16" | 1" | 20 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 0000 | |
| 5/16"-24 | 5/16" | 25° | 7/8" | 7/16" | 1 7/8" | 1 1/4" | 30 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 0000 |
| 3/8"-24 | 3/8" | 22° | 1" | 1/2" | 1 15/16" | 1 1/4" | 75 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 0000 | |
| 7/16"-20 | 7/16" | 22° | 1 1/8" | 9/16" | 2 1/8" | 1 3/8" | 85 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| 1/2"-20 | 1/2" | 22° | 1 5/16" | 5/8" | 2 7/16" | 1 1/2" | 100 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| 5/8"-18 | 5/8" | 22° | 1 1/2" | 3/4" | 2 5/8" | 1 5/8" | 130 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| 3/4"-16 | 3/4" | 22° | 1 3/4" | 7/8" | 2 7/8" | 1 3/4" | 220 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M5 × 0.8 mm | 5mm | 15° | 18mm | 8mm | 33mm | 19mm | 15 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M8 × 1.25 mm | 8mm | 12.5° | 24mm | 12mm | 42mm | 25mm | 40 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
| M12 × 1.75 mm | 12mm | 12.5° | 34mm | 16mm | 54mm | 32mm | 85 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
Chemical-Resistant Clevis Rod Ends
In addition to offering superior chemical resistance, these lightweight, fiber-reinforced nylon rod ends also reduce noise and vibration. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Temp. Range, °F | Includes | Shank Thread Direction | Specifications Met | Each | |
Nylon Plastic | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10-32 | 3/16" | 3/16" | 13/32" | 25/32" | 5/16" | 13/32" | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |
| 1/4"-28 | 1/4" | 1/4" | 15/32" | 15/16" | 11/32" | 15/32" | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 0000 |
| 5/16"-24 | 5/16" | 5/16" | 5/8" | 1 1/4" | 15/32" | 5/8" | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |
| 3/8"-24 | 3/8" | 13/32" | 25/32" | 1 9/16" | 19/32" | 25/32" | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |
| 7/16"-20 | 7/16" | 15/32" | 15/16" | 1 29/32" | 23/32" | 15/16" | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |
| 1/2"-20 | 1/2" | 9/16" | 1 1/16" | 2 7/32" | 7/8" | 1 1/8" | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |
| M5 × 0.8 mm | 5mm | 6mm | 12mm | 24mm | 9mm | 12mm | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |
| M6 × 1 mm | 6mm | 6mm | 12mm | 24mm | 9mm | 12mm | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |
| M8 × 1.25 mm | 8mm | 8mm | 16mm | 32mm | 12mm | 16mm | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |
| M10 × 1.5 mm | 10mm | 10mm | 20mm | 40mm | 15mm | 20mm | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |
| M12 × 1.75 mm | 12mm | 12mm | 24mm | 48mm | 18mm | 24mm | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |
| M16 × 2 mm | 16mm | 16mm | 32mm | 64mm | 24mm | 32mm | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |
| M20 × 1.5 mm | 20mm | 20mm | 40mm | 80mm | 30mm | 40mm | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |