McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    10 Products

    Hex Nuts

    Image of Product. Front orientation. Hex Nuts. Hex Nuts.
    The most commonly used hex nuts, these are suitable for fastening most machinery and equipment.
    Low-Strength Steel
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1-72
    		5/32"3/64"ASME B18.6.310000000000000000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1-72
    		5/32"3/64"10000000000000000
     
    Brass
    Brass—Conductive and nonmagnetic, brass nuts are commonly used to secure electrical equipment, such as circuit board assemblies and mounting brackets, inside enclosures. They're also softer than most metals, so they won't damage other fastening components.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Brass
    1-72
    		5/32"3/64"10000000000000000
     

    Narrow-Profile Hex Nuts

    Image of Product. Bottom orientation. Hex Nuts. Narrow-Profile Hex Nuts.
    When you have limited space for tightening with a wrench, use these nuts. Since they’re about 20% narrower, they fit in tight spots where standard-profile nuts won't fit. Also known as small-pattern hex nuts.
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1-72
    		7/64"1/16"5000000000000000
     
    Brass
    Brass—Conductive and nonmagnetic, brass nuts are commonly used to secure electrical equipment, such as circuit board assemblies and mounting brackets, inside enclosures. They're also softer than most metals, so they won't damage other fastening components.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Brass
    1-72
    		7/64"1/16"10000000000000000
     

    Cap Nuts

    Image of Product. Front orientation. Cap Nuts. Cap Nuts.
    Conceal and protect protruding screw threads while fastening parts together. These nuts help prevent damage to surrounding materials and reduce injuries. Also known as acorn nuts, they have a smooth, rounded head that creates a finished look.
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Thread
    Size
    Thread
    Dp.
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1-72
    		1/16"3/16"3/16"100000000000000
     

    Coupling Nuts

    Image of Product. Front orientation. Coupling Nuts. Coupling Nuts.
    Also known as extension nuts, these are commonly used to connect lengths of threaded rod and join threaded parts.
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Each
    Thread
    Size
    Lg.
    Wd.
    Threading
    1-9
    10-Up
    18-8 Stainless Steel
    1-72
    		5/16"3/16"Fully Threaded0000000000000000000
     

    Knurled-Head Thumb Nuts

    Image of Attribute. Front orientation. Contains Annotated. Thumb Nuts. Knurled-Head Thumb Nuts.
    Get a good grip on these nuts, even with oily fingers. They have a raised, slip-resistant head, so you can tighten them by hand and make controlled adjustments. Knurled-head nuts have a smaller profile than wing nuts, so they fit in tighter spots.
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Collar
    Thread
    Size
    Dia.
    Ht.
    Head
    Dia.
    Ht.
    Threading
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1-72
    		7/32"3/16"3/8"1/4"Fully Threaded100000000000000
     

    Flanged Knurled-Head Thumb Nuts

    Image of Attribute. Front orientation. Contains Annotated. Thumb Nuts. Flanged Knurled-Head Thumb Nuts.
    The slip-resistant head is easy to grip, while the flange distributes pressure evenly across the mounting surface without the need for a separate washer. These nuts are often used to secure screws in oversized or irregularly shaped holes since the flange covers a larger area than standard nuts.
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Collar
    Thread
    Size
    Dia.
    Ht.
    Head
    Dia.
    Ht.
    Threading
    Each
    18-8 Stainless Steel
    1-72
    		5/32"1/8"7/32"1/4"Fully Threaded00000000000000
     
    Brass
    Brass—With a warm, polished look, these nuts are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments. It is also softer than other metals, so it's easier to thread together.
    Collar
    Thread
    Size
    Dia.
    Ht.
    Head
    Dia.
    Ht.
    Threading
    Pkg.
    Qty.
    Pkg.
    Brass
    1-72
    		3/16"1/8"1/4"1/4"Fully Threaded100000000000000
     
    back to top