McMaster-Carr logo
    Filter by
    System of Measurement
    Thread Size
    Industrial Info Compare
    Fastener Strength Grade/Class
    Industrial Info Snippet
    Hex Nut Profile
    Nut Type
    Material
    Thread Direction
    Thread Type
    Height
    Attribute Image
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Fastener Strength Rating
    Drive Style
    Industrial Info Snippet
    Application
    Thread Spacing
    Industrial Info Snippet
    Color
    Performance
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    3 Products

    Heavy-Profile Hex Nuts

    About 10% wider and taller than standard-profile hex nuts, these handle heavier loads by distributing them over a larger area.
    Extreme-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Heavy-Profile Hex Nuts.
    These nuts are about 20% stronger than high-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    PTFE-Coated Steel—A slippery PTFE coating prevents these nuts from becoming stuck during installation. They resist rust in wet and outdoor environments, however they're not recommended for prolonged exposure since the coating can wear off.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Steel
    1 7/8"-8
    		2 15/16"1 27/32"ASTM Grade 2H
    		ASME B18.2.2, ASTM A1941000000000000000
     
    Blue PTFE-Coated Steel
    1 7/8"-8
    		2 15/16"1 27/32"ASTM Grade 2H
    		ASTM A194
    		100000000000000
     
    Low-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Heavy-Profile Hex Nuts.
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1 7/8"-8
    		2 15/16"1 27/32"ASME B18.2.2, SAE J9951000000000000000
     
    back to top