About Nuts, Materials, and Finishes
More
Mil. Spec. Rivet-Mount Nuts
Create threads in hard-to-work areas—where you can’t reach the back of a workpiece, or material is too thin to be tapped. For a strong grip, these nuts have distorted threads that increase friction with bolts. Because they mount with two rivets, they won’t spin when you’re tightening screws. However, these nuts do move inside their retainers, which lets you install bolts at a slight angle; use them to align with off-center parts. All meet military guidelines for dimensions and material.
Cadmium-plated nuts resist corrosion in industrial and saltwater environments, although will lose their corrosion resistance over 450° F. The cadmium plating also adds lubricity, making these nuts easy to install.
A286 stainless steel nuts are corrosion resistant. Silver-plated stainless steel nuts withstand temperatures up to 800° F. The silver plating also adds lubricity and prevents seizing caused by friction between nuts and bolts.
Lubricated nuts thread onto bolts smoothly.
For technical drawings and 3-D models, click on a part number.
Base | Barrel | Mounting | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Wd. | Thick. | Dia. | Ht. | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Specifications Met | Each | |
Steel—Unlubricated | |||||||||||
| 4-40 | 21/32" | 5/16" | 3/32" | 0.125" | 1/16" | 2 | 0.098" | 13/32" | MS21075-04N | 000000000 | 00000 |
| 6-32 | 11/16" | 11/32" | 3/32" | 0.172" | 5/64" | 2 | 0.098" | 7/16" | MS21075-06N | 000000000 | 0000 |
| 8-32 | 45/64" | 23/64" | 3/32" | 0.203" | 5/32" | 2 | 0.098" | 15/32" | MS21075-08N | 000000000 | 0000 |
| 10-32 | 47/64" | 13/32" | 3/32" | 0.234" | 5/32" | 2 | 0.098" | 1/2" | MS21075-3N | 000000000 | 0000 |
| 1/4"-28 | 51/64" | 1/2" | 3/32" | 0.313" | 3/16" | 2 | 0.098" | 9/16" | MS21075-4N | 000000000 | 0000 |
Cadmium-Plated Steel—Lubricated | |||||||||||
| 4-40 | 21/32" | 5/16" | 3/32" | 0.125" | 1/16" | 2 | 0.098" | 13/32" | MS21075L04N | 000000000 | 0000 |
| 6-32 | 11/16" | 11/32" | 3/32" | 0.172" | 5/64" | 2 | 0.098" | 7/16" | MS21075L06N | 000000000 | 0000 |
| 8-32 | 45/64" | 23/64" | 3/32" | 0.203" | 5/32" | 2 | 0.098" | 15/32" | MS21075L08N | 000000000 | 0000 |
| 10-32 | 47/64" | 13/32" | 3/32" | 0.234" | 5/32" | 2 | 0.098" | 1/2" | MS21075L3N | 000000000 | 0000 |
| 1/4"-28 | 51/64" | 1/2" | 3/32" | 0.313" | 3/16" | 2 | 0.098" | 9/16" | MS21075L4N | 000000000 | 0000 |
Carbon Steel—Unlubricated | |||||||||||
| 6-32 | 61/64" | 13/32" | 1/32" | 0.172" | 11/64" | 2 | 0.098" | 11/16" | MS21059-06 | 000000000 | 0000 |
| 8-32 | 61/64" | 13/32" | 1/32" | 0.203" | 7/32" | 2 | 0.098" | 11/16" | MS21059-08 | 000000000 | 0000 |
| 10-32 | 61/64" | 13/32" | 1/32" | 0.234" | 7/32" | 2 | 0.098" | 11/16" | MS21059-3 | 000000000 | 0000 |
| 1/4"-28 | 1 19/64" | 33/64" | 1/32" | 0.313" | 1/4" | 2 | 0.098" | 1" | MS21059-4 | 000000000 | 0000 |
| 5/16"-24 | 1 19/64" | 39/64" | 3/64" | 0.375" | 9/32" | 2 | 0.13" | 1" | MS21059-5 | 000000000 | 00000 |
Cadmium-Plated Carbon Steel—Lubricated | |||||||||||
| 4-40 | 61/64" | 13/32" | 1/32" | 0.141" | 9/64" | 2 | 0.098" | 11/16" | MS21059L04 | 000000000 | 0000 |
| 6-32 | 61/64" | 13/32" | 1/32" | 0.172" | 11/64" | 2 | 0.098" | 11/16" | MS21059L06 | 000000000 | 0000 |
| 8-32 | 61/64" | 13/32" | 1/32" | 0.203" | 7/32" | 2 | 0.098" | 11/16" | MS21059L08 | 000000000 | 0000 |
| 10-32 | 61/64" | 13/32" | 1/32" | 0.234" | 7/32" | 2 | 0.098" | 11/16" | MS21059L3 | 000000000 | 0000 |
| 1/4"-28 | 1 19/64" | 33/64" | 1/32" | 0.313" | 1/4" | 2 | 0.098" | 1" | MS21059L4 | 000000000 | 0000 |
| 5/16"-24 | 1 19/64" | 39/64" | 3/64" | 0.375" | 9/32" | 2 | 0.13" | 1" | MS21059L5 | 000000000 | 00000 |
| 3/8"-24 | 1 19/64" | 43/64" | 1/16" | 0.453" | 19/64" | 2 | 0.13" | 1" | MS21059L6 | 000000000 | 00000 |
A286 Stainless Steel—Lubricated | |||||||||||
| 4-40 | 21/32" | 5/16" | 3/32" | 0.125" | 1/16" | 2 | 0.098" | 13/32" | MS21076L04N | 000000000 | 00000 |
| 6-32 | 11/16" | 11/32" | 3/32" | 0.172" | 5/64" | 2 | 0.098" | 7/16" | MS21076L06N | 000000000 | 00000 |
| 6-32 | 61/64" | 13/32" | 1/32" | 0.172" | 11/64" | 2 | 0.098" | 11/16" | MS21060L06 | 000000000 | 00000 |
| 8-32 | 45/64" | 23/64" | 3/32" | 0.203" | 5/32" | 2 | 0.098" | 15/32" | MS21076L08N | 000000000 | 0000 |
| 8-32 | 61/64" | 13/32" | 1/32" | 0.203" | 7/32" | 2 | 0.098" | 11/16" | MS21060L08 | 000000000 | 0000 |
| 10-32 | 47/64" | 13/32" | 3/32" | 0.234" | 5/32" | 2 | 0.098" | 1/2" | MS21076L3N | 000000000 | 0000 |
| 10-32 | 61/64" | 13/32" | 1/32" | 0.234" | 7/32" | 2 | 0.098" | 11/16" | MS21060L3 | 000000000 | 0000 |
| 1/4"-28 | 51/64" | 1/2" | 3/32" | 0.313" | 3/16" | 2 | 0.098" | 9/16" | MS21076L4N | 000000000 | 0000 |
| 1/4"-28 | 1 19/64" | 33/64" | 1/32" | 0.313" | 1/4" | 2 | 0.098" | 1" | MS21060L4 | 000000000 | 00000 |
| 5/16"-24 | 1 1/64" | 37/64" | 7/64" | 0.391" | 7/32" | 2 | 0.13" | 23/32" | MS21076L5N | 000000000 | 00000 |
| 5/16"-24 | 1 19/64" | 39/64" | 3/64" | 0.375" | 9/32" | 2 | 0.13" | 1" | MS21060L5 | 000000000 | 00000 |
| 3/8"-24 | 1 19/64" | 43/64" | 1/16" | 0.453" | 19/64" | 2 | 0.13" | 1" | MS21060L6 | 000000000 | 00000 |
Silver-Plated A286 Stainless Steel—Unlubricated | |||||||||||
| 4-40 | 21/32" | 5/16" | 3/32" | 0.125" | 1/16" | 2 | 0.098" | 13/32" | MS21076-04N | 000000000 | 00000 |
| 6-32 | 61/64" | 13/32" | 1/32" | 0.172" | 11/64" | 2 | 0.098" | 11/16" | MS21060-06 | 000000000 | 0000 |
| 8-32 | 45/64" | 23/64" | 3/32" | 0.203" | 5/32" | 2 | 0.098" | 15/32" | MS21076-08N | 000000000 | 00000 |
| 10-32 | 47/64" | 13/32" | 3/32" | 0.234" | 5/32" | 2 | 0.098" | 1/2" | MS21076-3N | 000000000 | 0000 |
| 10-32 | 61/64" | 13/32" | 1/32" | 0.234" | 7/32" | 2 | 0.098" | 11/16" | MS21060-3 | 000000000 | 0000 |
| 1/4"-28 | 51/64" | 1/2" | 3/32" | 0.313" | 3/16" | 2 | 0.098" | 9/16" | MS21076-4N | 000000000 | 00000 |
| 1/4"-28 | 1 19/64" | 33/64" | 1/32" | 0.313" | 1/4" | 2 | 0.098" | 1" | MS21060-4 | 000000000 | 00000 |
| 5/16"-24 | 1 1/64" | 37/64" | 7/64" | 0.391" | 7/32" | 2 | 0.13" | 23/32" | MS21076-5N | 000000000 | 00000 |
Wing Head Quarter-Turn Captive Panel Screws with Rivet-Mount Nut
Rivet these nuts into thin panels for a flush fit. They can be mounted without space between panels. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. Rivets not included. Install with 3/32" rivets in steel and 1/8" rivets in plastic. Length is measured from under the screw head.
Zinc-plated steel nuts and screws are corrosion resistant in wet environments. An installation tool (sold separately) is required to install the retainer.
Acetal plastic nuts and screws are chemical resistant and lightweight.
For technical drawings and 3-D models, click on a part number.
For Panel Hole Dia. | Head | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Total Panel Thick. | Inner | Outer | Wd. | Ht. | Lg. | Nut Wd. | Shank Dia. | Mounting Hole Ctr.-to-Ctr. | Retainer Material | Temperature Range, °F | Color | Each | |
Zinc-Plated Steel | |||||||||||||
| 0.15" to 0.17" | 0.44" | 0.24" | 0.88" | 0.44" | 0.46" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 00000 |
| 0.17" to 0.19" | 0.44" | 0.24" | 0.88" | 0.44" | 0.48" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.19" to 0.21" | 0.44" | 0.24" | 0.88" | 0.44" | 0.5" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.21" to 0.23" | 0.44" | 0.24" | 0.88" | 0.44" | 0.52" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.23" to 0.25" | 0.44" | 0.24" | 0.88" | 0.44" | 0.54" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.25" to 0.27" | 0.44" | 0.24" | 0.88" | 0.44" | 0.56" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Acetal Plastic | |||||||||||||
| 0.25" to 0.3" | 0.438" | 0.39" | 1.1" | 0.43" | 0.95" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.3" to 0.35" | 0.438" | 0.39" | 1.1" | 0.43" | 1" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.4" to 0.45" | 0.438" | 0.39" | 1.1" | 0.43" | 1.1" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
Rounded Head Quarter-Turn Captive Panel Screws with Rivet-Mount Nut
Rivet-mount nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. Rivets not included. Install with 3/32" rivets in steel and 1/8" rivets in plastic. Length is measured from under the screw head.
Zinc-plated steel nuts and screws are corrosion resistant in wet environments. An installation tool (sold separately) is required to install the retainer.
Acetal plastic nuts and screws are chemical resistant and lightweight.
For technical drawings and 3-D models, click on a part number.
For Panel Hole Dia. | Head | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Total Panel Thick. | Inner | Outer | Dia. | Ht. | Lg. | Nut Wd. | Shank Dia. | Mounting Hole Ctr.-to-Ctr. | Retainer Material | Temperature Range, °F | Color | Each | |
Slotted | |||||||||||||
Zinc-Plated Steel | |||||||||||||
| 0.15" to 0.17" | 0.44" | 0.24" | 0.375" | 0.09" | 0.46" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 00000 |
| 0.17" to 0.19" | 0.44" | 0.24" | 0.375" | 0.09" | 0.48" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.19" to 0.21" | 0.44" | 0.24" | 0.375" | 0.09" | 0.5" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.21" to 0.23" | 0.44" | 0.24" | 0.375" | 0.09" | 0.52" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.23" to 0.25" | 0.44" | 0.24" | 0.375" | 0.09" | 0.54" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.25" to 0.27" | 0.44" | 0.24" | 0.375" | 0.09" | 0.56" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Acetal Plastic | |||||||||||||
| 0.15" to 0.2" | 0.438" | 0.39" | 0.625" | 0.13" | 0.85" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.2" to 0.25" | 0.438" | 0.39" | 0.625" | 0.13" | 0.9" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.3" to 0.35" | 0.438" | 0.39" | 0.625" | 0.13" | 1" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.4" to 0.45" | 0.438" | 0.39" | 0.625" | 0.13" | 1.1" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
Phillips | |||||||||||||
Zinc-Plated Steel | |||||||||||||
| 0.15" to 0.17" | 0.44" | 0.24" | 0.375" | 0.09" | 0.46" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.17" to 0.19" | 0.44" | 0.24" | 0.375" | 0.09" | 0.48" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.19" to 0.21" | 0.44" | 0.24" | 0.375" | 0.09" | 0.5" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.21" to 0.23" | 0.44" | 0.24" | 0.375" | 0.09" | 0.52" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.23" to 0.25" | 0.44" | 0.24" | 0.375" | 0.09" | 0.54" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.25" to 0.27" | 0.44" | 0.24" | 0.375" | 0.09" | 0.56" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |