High Nuts | McMaster-Carr

Filter by

System of Measurement

Thread Size

Height

Hex Nut Profile

Nut Type

Width

Material

Thread Pitch

Fastener Strength Grade/Class

Finish

Locking Type

Thread Direction

Specifications Met

Thread Type

Thread Spacing

Flange Diameter

Fastener Strength Rating

Performance

Drive Style

REACH Compliance

DFARS Compliance

Thread Fit

RoHS Compliance

Forward

How can we improve?

93 Products

High-Profile Hex Nuts

Slightly taller than standard-profile hex nuts, these have a larger gripping area so your wrench or socket won't slip off as you tighten them. They're often used in vehicles and machinery where fasteners can be difficult to reach.

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Zinc-Plated Steel


	M6 × 1 mm	10	6	ISO Class 8	100	000000000	000000
	M8 × 1.25 mm	13	8	ISO Class 8	50	000000000	00000
	M10 × 1.5 mm	17	10	ISO Class 8	25	000000000	00000
	M12 × 1.75 mm	19	12	ISO Class 8	10	000000000	0000
	M14 × 2 mm	22	14	ISO Class 8	10	000000000	00000
	M16 × 2 mm	24	16	ISO Class 8	10	000000000	00000
	M20 × 2.5 mm	30	20	ISO Class 8	5	000000000	00000
	M24 × 3 mm	36	24	ISO Class 8	1	000000000	0000
	M30 × 3.5 mm	46	28	ISO Class 8	1	000000000	0000

High-Strength Steel

Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel


	3/8"-16	9/16"	17/32"	SAE Grade 8	SAE J995	1	000000000	00000
	3/8"-24	9/16"	17/32"	SAE Grade 8	SAE J995	1	000000000	00000
	7/16"-20	5/8"	39/64"	SAE Grade 8	SAE J995	25	000000000	00000
	1/2"-13	3/4"	11/16"	SAE Grade 8	SAE J995	1	000000000	0000
	1/2"-20	3/4"	11/16"	SAE Grade 8	SAE J995	25	000000000	00000
	9/16"-18	7/8"	49/64"	SAE Grade 8	SAE J995	10	000000000	0000
	5/8"-11	15/16"	27/32"	SAE Grade 8	SAE J995	1	000000000	0000
	5/8"-18	15/16"	27/32"	SAE Grade 8	SAE J995	10	000000000	00000
	3/4"-10	1 1/16"	1"	SAE Grade 8	SAE J995	1	000000000	00000
	3/4"-16	1 1/8"	1"	SAE Grade 8	SAE J995	10	000000000	00000
	7/8"-14	1 5/16"	1 5/32"	SAE Grade 8	SAE J995	5	000000000	00000
	1"-8	1 1/2"	1 5/16"	SAE Grade 8	SAE J995	1	000000000	00000
	1"-14	1 7/16"	1 5/16"	SAE Grade 8	SAE J995	5	000000000	00000
	1 1/4"-12	1 13/16"	1 5/8"	SAE Grade 8	SAE J995	1	000000000	00000
	1 1/2"-12	2 3/16"	2"	SAE Grade 8	SAE J995	1	000000000	00000

Low-Strength Steel

Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Zinc-Plated Steel


	M2 × 0.4 mm	4	2	ISO Class 6	25	000000000	000000
	M2.5 × 0.45 mm	5	2.5	ISO Class 6	25	000000000	00000
	M3 × 0.5 mm	5.5	3	ISO Class 6	50	000000000	0000
	M4 × 0.7 mm	7	4	ISO Class 6	50	000000000	0000
	M5 × 0.8 mm	8	5	ISO Class 6	50	000000000	0000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd.	Ht.	Pkg. Qty.		Pkg.
18-8 Stainless Steel


	1/4"-20	7/16"	11/32"	1	000000000	00000
	5/16"-18	1/2"	21/64"	1	000000000	0000
	3/8"-16	9/16"	17/32"	1	000000000	0000
	1/2"-13	3/4"	11/16"	1	000000000	0000

High-Profile Nylon-Insert Locknuts

Slightly taller than standard-profile locknuts, these have a larger gripping area so your wrench or socket won't slip off as you tighten them. They're often used in vehicles and machinery where fasteners can be difficult to reach. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.

High-Strength Steel

Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel


	M6 × 1 mm	10	8	ISO Class 10	220	DIN 982	50	000000000	000000
	M8 × 1.25 mm	13	9.5	ISO Class 10	220	DIN 982	25	000000000	0000
	M10 × 1.5 mm	17	11.5	ISO Class 10	220	DIN 982	25	000000000	00000
	M12 × 1.75 mm	19	14	ISO Class 10	220	DIN 982	10	000000000	00000
	M14 × 2 mm	22	16	ISO Class 10	220	DIN 982	10	000000000	00000
	M16 × 2 mm	24	18	ISO Class 10	220	DIN 982	5	000000000	00000
	M18 × 2.5 mm	27	20	ISO Class 10	220	DIN 982	5	000000000	00000
	M20 × 2.5 mm	30	22	ISO Class 10	220	DIN 982	1	000000000	0000
	M24 × 3 mm	36	28	ISO Class 10	220	DIN 982	1	000000000	0000

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Yellow-Chromate-Plated Steel


	M5 × 0.8 mm	8	6.3	ISO Class 8	220	DIN 982, ISO 7040	100	000000000	000000
	M6 × 1 mm	10	8	ISO Class 8	220	DIN 982, ISO 7040	100	000000000	00000
	M8 × 1.25 mm	13	9.5	ISO Class 8	220	DIN 982, ISO 7040	100	000000000	00000
	M10 × 1.5 mm	17	11.5	ISO Class 8	220	DIN 982, ISO 7040	50	000000000	00000
	M12 × 1.75 mm	19	14	ISO Class 8	220	DIN 982, ISO 7040	25	000000000	00000
	M16 × 2 mm	24	18	ISO Class 8	220	DIN 982, ISO 7040	10	000000000	00000
	M20 × 2.5 mm	32	22	ISO Class 8	220	DIN 982, ISO 7040	5	000000000	00000
	M24 × 3 mm	36	28	ISO Class 8	220	DIN 982, ISO 7040	1	000000000	0000

	Zinc-Plated Steel


			M4 × 0.7 mm	7	5.3	ISO Class 8	220	DIN 982, ISO 7040	100	000000000	0000
			M5 × 0.8 mm	8	6.3	ISO Class 8	220	DIN 982, ISO 7040	100	000000000	0000
			M6 × 1 mm	10	8	ISO Class 8	220	DIN 982, ISO 7040	100	000000000	00000
			M8 × 1.25 mm	13	9.5	ISO Class 8	220	DIN 982, ISO 7040	50	000000000	00000
			M10 × 1.5 mm	17	11.5	ISO Class 8	220	DIN 982, ISO 7040	25	000000000	00000
			M12 × 1.75 mm	19	14	ISO Class 8	220	DIN 982, ISO 7040	25	000000000	00000
			M14 × 1.5 mm	22	16	ISO Class 8	220	DIN 982, ISO 7040	10	000000000	00000
			M14 × 2 mm	22	16	ISO Class 8	220	DIN 982, ISO 7040	10	000000000	00000
			M16 × 1.5 mm	24	18	ISO Class 8	220	DIN 982, ISO 7040	5	000000000	00000
			M16 × 2 mm	24	18	ISO Class 8	220	DIN 982, ISO 7040	10	000000000	00000
			M18 × 2.5 mm	27	20	ISO Class 8	220	DIN 982, ISO 7040	5	000000000	00000
			M20 × 1.5 mm	30	22	ISO Class 8	220	DIN 982, ISO 7040	1	000000000	0000
			M20 × 2.5 mm	30	22	ISO Class 8	220	DIN 982, ISO 7040	1	000000000	0000
			M22 × 2.5 mm	32	25	ISO Class 8	220	DIN 982, ISO 7040	1	000000000	0000
			M24 × 3 mm	36	28	ISO Class 8	220	DIN 982, ISO 7040	1	000000000	0000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

316 Stainless Steel—Our most corrosion-resistant nuts, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals.

	Wd., mm	Ht., mm	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel


	M4 × 0.7 mm	7	5.3	220	DIN 982	25	000000000	00000
	M5 × 0.8 mm	8	6.3	220	DIN 982	25	000000000	0000
	M6 × 1 mm	10	8	220	DIN 982	25	000000000	0000
	M8 × 1.25 mm	13	9.5	220	DIN 982	10	000000000	0000
	M10 × 1.5 mm	17	11.5	220	DIN 982	10	000000000	00000
	M12 × 1.75 mm	19	14	220	DIN 982	5	000000000	0000
	M16 × 2 mm	24	18	220	DIN 982	1	000000000	0000
	M20 × 2.5 mm	30	22	220	DIN 982	1	000000000	0000

	316 Stainless Steel


			M4 × 0.7 mm	7	5.3	220	DIN 982	10	000000000	0000
			M5 × 0.8 mm	8	6.3	220	DIN 982	10	000000000	0000
			M6 × 1 mm	10	8	220	DIN 982	10	000000000	0000
			M8 × 1.25 mm	13	9.5	220	DIN 982	10	000000000	0000
			M10 × 1.5 mm	17	11.5	220	DIN 982	5	000000000	0000
			M12 × 1.75 mm	19	14	220	DIN 982	5	000000000	00000
			M16 × 2 mm	24	18	220	DIN 982	1	000000000	0000
			M20 × 2.5 mm	30	22	220	DIN 982	1	000000000	0000
			M24 × 3 mm	36	28	220	DIN 982	1	000000000	00000

High-Profile Flange Nuts

30% taller than standard-profile nuts, these have a large gripping area so your wrench or socket won't slip off as you tighten them. They also engage more threads for extra gripping power. Nuts have a flange that distributes pressure evenly across the mounting surface without the need for a separate washer. They are ideal for securing screws in oversized or irregularly shaped holes since the flange covers a larger area than standard nuts. Also known as collar nuts.

High-Strength Steel

Rated Grade 8, Grade G, or Class 10, these are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, and motors. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

				Flange, mm
	Thread Size	Wd., mm	Ht., mm	Dia.	Thk.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel


		M6 × 1 mm	10	9	14	3	ISO Class 10	DIN 6331	50	000000000	000000
		M8 × 1.25 mm	13	12	18	3.5	ISO Class 10	DIN 6331	25	000000000	00000
		M10 × 1.5 mm	16	15	22	4	ISO Class 10	DIN 6331	10	000000000	00000
		M12 × 1.75 mm	18	18	25	4	ISO Class 10	DIN 6331	10	000000000	00000
		M14 × 2 mm	22	21	28	4	ISO Class 10	DIN 6331	5	000000000	00000
		M16 × 2 mm	24	24	31	5	ISO Class 10	DIN 6331	5	000000000	00000
		M18 × 2.5 mm	27	27	34	5	ISO Class 10	DIN 6331	1	000000000	0000
		M20 × 2.5 mm	30	30	37	6	ISO Class 10	DIN 6331	1	000000000	0000
		M24 × 3 mm	36	36	45	6	ISO Class 10	DIN 6331	1	000000000	00000
		M30 × 3.5 mm	46	45	58	8	ISO Class 10	DIN 6331	1	000000000	00000
		M36 × 4 mm	55	54	68	10	ISO Class 10	DIN 6331	1	000000000	00000