A lightweight alternative to metal valves, these plastic valves have NPT connections for use with threaded pipe. All meet NSF/ANSI 61 for use in drinking water systems. Also known as gate valves, they gradually open and close with multiple turns of the wheel handle to prevent system damage from suddenly starting and stopping flow. Since the handle sits on a nonrising stem, it stays at the same height whether these valves are open or closed. This helps them fit in underground lines and other low-clearance spots. When seals wear out, replace them using repair kits (sold separately).

PVC valves are made of the standard material used in most drinking water systems. CPVC valves resist heat up to 200° F, making them a better choice for hot water than PVC valves.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Bond these valves to plastic pipe with PVC primer and cement (not included) to create a permanent, leak-tight connection in drinking water lines. Also known as gate valves, they open and close gradually to prevent damage to your system from sudden changes in flow. Turn the handle multiple times to start or stop flow. Safe for use in drinking water systems, these valves meet NSF/ANSI 61. They’re plastic, so they’re lighter in weight than metal valves.

All have a nonrising stem, which means that the handle won’t move up as the valve opens. This makes them good for underground and other low-clearance applications.

CPVC valves handle temperatures up to 200° F, so you can use them in hot drinking water applications.

Use repair kits to replace worn seals.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.