How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Extreme-Pressure Stainless Steel Threaded Pipe Fittings
With the strength to handle extreme pressures, these fittings can be used to connect equipment in hydraulic fluid lines. 316 stainless steel fittings have excellent corrosion resistance. BSPP and metric male threads have either a gasket or a gasket and washer to prevent leaks.
For technical drawings and 3-D models, click on a part number.


Male Threads with
Gasket and Washer
- For Use With: See table
- Specifications Met: See table
316 Stainless Steel | |||||||
---|---|---|---|---|---|---|---|
Pipe Size (A) | Dash Size (A) | Thread Size (B) | Max. Pressure | For Use With | Specifications Met | Each | |
BSPP Male × Metric Male | |||||||
1/2 | 08 | M22 × 1.5 mm | 4,500 psi @ 72° F | Hydraulic Fluid, Oil, Water | DIN 7631, ISO 1179, ISO 8434-6, ISO 9974 | 00000000 | 000000 |
3/4 | 12 | M22 × 1.5 mm | 3,600 psi @ 72° F | Hydraulic Fluid, Oil, Water | DIN 7631, ISO 1179, ISO 8434-6, ISO 9974 | 00000000 | 00000 |
Compact Extreme-Pressure Steel Threaded Pipe Fittings
These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces. They are galvanized and zinc-plated steel, which have better corrosion resistance than plain steel fittings. BSPP and metric male threads have either a gasket, or a gasket and washer, to prevent leaks.
For technical drawings and 3-D models, click on a part number.


(SAE Straight) Male Threads
with Gasket and Washer
- For Use With: See table
- Specifications Met: See table
Pipe Size (A) | Dash Size (A) | Thread Size (B) | Max. Pressure | Material | For Use With | Specifications Met | Each | |
NPT Male × Metric Male | ||||||||
---|---|---|---|---|---|---|---|---|
1/2 | 08 | M22 × 1.5 mm | 4,500 psi @ 72° F | Galvanized Steel | Air, Hydraulic Fluid, Oil, Water | ASME B1.20.3, DIN 2353, ISO 8434-1 | 00000000 | 000000 |
BSPP Male × Metric Male | ||||||||
1/2 | 08 | M22 × 1.5 mm | 4,500 psi @ 72° F | Galvanized Steel | Air, Diesel Fuel, Gasoline, Hydraulic Fluid, Oil, Water | DIN 7631, ISO 1179, ISO 6149, ISO 8434-6, ISO 9974 | 00000000 | 00000 |
5/8 | __ | M22 × 1.5 mm | 4,000 psi @ 72° F | Galvanized Steel | Air, Diesel Fuel, Gasoline, Hydraulic Fluid, Oil, Water | DIN 7631, ISO 1179, ISO 6149, ISO 8434-6, ISO 9974 | 00000000 | 00000 |
High-Pressure Brass Threaded Pipe Fittings
These fittings have the strength to handle high-pressure applications. They are brass for good corrosion resistance.
NPTF (Dryseal) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.


- For Use With: Air, Water, Natural Gas, Oil
- Specifications Met: SAE J530, SAE J531
Pipe Size | Thread Size | Max. Pressure | Male End Gasket Material | Each | |
NPTF Female × Metric Male | |||||
---|---|---|---|---|---|
3/8 | M22 × 1.5 mm | 1,000 psi @ 72° F | Fluorocarbon Rubber | 000000000 | 000000 |
Metal Barbed Hose Fittings for Air and Water
Slide the barbed end into rubber hose and secure with the appropriate clamp or crimp-on hose ferrule.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. Plain brass fittings have good corrosion resistance.Aluminum fittings are lighter in weight than other metal fittings. They have good corrosion resistance.
Fittings with a threaded end are also known as hose nipples.
Metric, UN/UNF (SAE Straight), and BSPP male threads with gasket protect against leaks.
For technical drawings and 3-D models, click on a part number.


UN/UNF (SAE Straight)
Male Threads with Gasket
- Maximum Pressure: See table
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
For Hose ID | Thread Size | Gasket Material | Max. Pressure | Temperature Range, °F | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | ||||||||
---|---|---|---|---|---|---|---|---|
1" | M22 × 1.5 mm | Buna-N Rubber | 300 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 000000 |
19mm | M22 × 1.5 mm | Buna-N Rubber | 250 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
Aluminum | ||||||||
1" | M22 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
Push-On Barbed Hose Fittings for Hydraulic Fluid
These fittings have sharp barbs to grip rubber push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. Use them in low-pressure hydraulic applications up to 350 psi. Also known as hose nipples, they adapt a barbed end to a threaded end, so you can connect to pumps, cylinders, and other equipment in your hydraulic system. Fittings are zinc-plated steel, which has excellent strength and durability. Fittings have fair corrosion resistance.
Fittings that swivel until tightened rotate 360° for easy installation.
Note: To ensure proper connection, the barbed end has to be pushed in all the way, with the hose end concealed by the ring.
For technical drawings and 3-D models, click on a part number.

- Maximum Pressure: See table
- Maximum Vacuum: 28 in. of Hg @ 72° F
- Temperature Range: -40° to 255° F
- For Hose Manufacturer Series: Parker 801
37° Flared Fittings for Steel Tubing

- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Tubing: Use with seamless steel
- Specifications Met: SAE J514
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately. Fittings are zinc-plated steel for fair corrosion resistance.
To prevent leaks, UN/UNF (SAE Straight) male threads have a gasket. Metric and BSPP male threads have either a gasket or a gasket and washer.
For technical drawings and 3-D models, click on a part number.

- Temperature Range: -60° to 400° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°. Sleeves are zinc-plated steel for fair corrosion resistance. They are also known as ferrules.
Inch × metric sleeve adapters convert the fitting from inch to metric.
For Tube OD | |||||
---|---|---|---|---|---|
Inch | Metric, mm | Sleeve Material | Max. Pressure | Each | |
Inch Sleeves | |||||
5/8" | __ | Zinc-Plated Steel | 3,000 psi @ 72° F | 000000000 | 00000 |
3/4" | __ | Zinc-Plated Steel | 3,000 psi @ 72° F | 000000000 | 0000 |
Inch × Metric Sleeve Adapters | |||||
5/8" | 14 | Zinc-Plated Steel | 3,000 psi @ 72° F | 000000000 | 0000 |
5/8" | 16 | Zinc-Plated Steel | 3,000 psi @ 72° F | 000000000 | 0000 |
Plastic Barbed Tube Fittings for Air and Water
Fittings have barbs that grip onto tubing.
Nylon fittings have excellent impact and abrasion resistance.
For technical drawings and 3-D models, click on a part number.

- Temperature Range: See table
- Tubing: Semi-Clear: Use with firm or soft (Durometer 45A-80A) polyurethane rubber or PVC plastic
Opaque: Use with firm or soft (Durometer 40A-80A) polyurethane rubber or PVC plastic
For Tube ID | Thread Size | Material | Color | Clarity | Max. Pressure | Temp. Range, °F | Pkg. Qty. | Pkg. | |
Metric Threads | |||||||||
---|---|---|---|---|---|---|---|---|---|
12mm | M22 × 1.5 mm | Nylon Plastic | Gray | Opaque | 145 psi @ 72° F | -40° to 190° | 10 | 00000000 | 000000 |