How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Extreme-Pressure Stainless Steel Threaded Pipe Fittings
With the strength to handle extreme pressures, these fittings can be used to connect equipment in hydraulic fluid lines. 316 stainless steel fittings have excellent corrosion resistance. BSPP and metric male threads have either a gasket or a gasket and washer to prevent leaks.
For technical drawings and 3-D models, click on a part number.
Male Threads with
Gasket and Washer
- For Use With: See table
- Specifications Met: See table
316 Stainless Steel | |||||||
|---|---|---|---|---|---|---|---|
| Pipe Size (A)  | Dash Size (A) | Thread Size (B) | Max. Pressure | For Use With | Specifications Met | Each | |
BSPP Male × Metric Male | |||||||
| 1/4 | 04 | M14 × 1.5 mm | 5,000 psi @ 72° F | Hydraulic Fluid, Oil, Water | DIN 7631, ISO 1179, ISO 8434-6, ISO 9974 | 00000000 | 000000 |
Compact Extreme-Pressure Steel Threaded Pipe Fittings
These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces. They are galvanized and zinc-plated steel, which have better corrosion resistance than plain steel fittings. BSPP and metric male threads have either a gasket, or a gasket and washer, to prevent leaks.
For technical drawings and 3-D models, click on a part number.
(SAE Straight) Male Threads
with Gasket and Washer
- For Use With: See table
- Specifications Met: See table
| Pipe Size (A) | Dash Size (A) | Thread Size (B) | Max. Pressure | Material | For Use With | Specifications Met | Each | |
NPT Male × Metric Male | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4 | 04 | M14 × 1.5 mm | 6,000 psi @ 72° F | Galvanized Steel | Air, Hydraulic Fluid, Oil, Water | ASME B1.20.3, DIN 2353, ISO 8434-1 | 00000000 | 000000 |
BSPP Male × Metric Male | ||||||||
| 1/4 | 04 | M14 × 1.5 mm | 6,000 psi @ 72° F | Galvanized Steel | Air, Diesel Fuel, Gasoline, Hydraulic Fluid, Oil, Water | DIN 7631, ISO 1179, ISO 6149, ISO 8434-6, ISO 9974 | 00000000 | 00000 |
| 3/8 | 06 | M14 × 1.5 mm | 5,500 psi @ 72° F | Galvanized Steel | Air, Diesel Fuel, Gasoline, Hydraulic Fluid, Oil, Water | DIN 7631, ISO 1179, ISO 6149, ISO 8434-6, ISO 9974 | 00000000 | 00000 |
Metal Barbed Hose Fittings for Air and Water
Slide the barbed end into rubber hose and secure with the appropriate clamp or crimp-on hose ferrule.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. Plain brass fittings have good corrosion resistance.Aluminum fittings are lighter in weight than other metal fittings. They have good corrosion resistance.
Stainless steel fittings have very good corrosion resistance. 303 stainless steel fittings won’t rust when exposed to water, making them good for areas that require frequent cleanings. Fittings with a threaded end are also known as hose nipples.
Metric, UN/UNF (SAE Straight), and BSPP male threads with gasket protect against leaks.
For technical drawings and 3-D models, click on a part number.
UN/UNF (SAE Straight)
Male Threads with Gasket
- Maximum Pressure: See table
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Thread Size | Gasket Material | Max. Pressure | Temperature Range, °F | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4" | M14 × 1.5 mm | Buna-N Rubber | 300 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 000000 |
| 3/8" | M14 × 1.5 mm | Buna-N Rubber | 300 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
| 1/2" | M14 × 1.5 mm | Buna-N Rubber | 300 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
| 12mm | M14 × 1.5 mm | Buna-N Rubber | 250 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
Aluminum | ||||||||
| 3/8" | M14 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
| 1/2" | M14 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
| 12mm | M14 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
303 Stainless Steel | ||||||||
| 3/8" | M14 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
| 1/2" | M14 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
| 10mm | M14 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
Metal Barbed Hose Fittings for Chemicals and Petroleum
Made of stainless steel, these fittings stand up to a wide variety of chemicals, as well as fuels, gasoline, and oils. To connect, slide the barbed end into plastic or rubber hose and secure with a clamp.
Adapters are also known as hose nipples; they adapt a barbed end to a threaded end.
Metric and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks.
For technical drawings and 3-D models, click on a part number.
- For Use With: See table
- Maximum Pressure: See table
- Temperature Range: -40° to 300° F
- Attachment Type: Use Band-and-Buckle Clamps
Thread | |||||||
|---|---|---|---|---|---|---|---|
| For Hose ID | Size | Pitch, mm | Gasket Material | Max. Pressure | For Use With | Each | |
316 Stainless Steel | |||||||
| 3/4" | M14 | 1.5 | Fluoroelastomer Rubber | 125 psi @ 72° F | Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 000000 |
| 8mm | M14 | 1.5 | Fluoroelastomer Rubber | 125 psi @ 72° F | Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 00000 |
Push-On Barbed Hose Fittings for Hydraulic Fluid
These fittings have sharp barbs to grip rubber push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. Use them in low-pressure hydraulic applications up to 350 psi. Also known as hose nipples, they adapt a barbed end to a threaded end, so you can connect to pumps, cylinders, and other equipment in your hydraulic system. Fittings are zinc-plated steel, which has excellent strength and durability. Fittings have fair corrosion resistance.
Fittings that swivel until tightened rotate 360° for easy installation.
Note: To ensure proper connection, the barbed end has to be pushed in all the way, with the hose end concealed by the ring.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 350 psi @ 72° F
- Maximum Vacuum: 28 in. of Hg @ 72° F
- Temperature Range: -40° to 255° F
- For Hose Manufacturer Series: Parker 801
- Maximum Pressure: See table
- Maximum Vacuum: 28 in. of Hg @ 72° F
- Temperature Range: -40° to 255° F
- For Hose Manufacturer Series: Parker 801
International Standard ISO Minimal-Spill
Quick-Disconnect Hose Couplings for Hydraulic Fluid
Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close against each other, reducing fluid loss when connecting and disconnecting the line. A complete coupling consists of a plug and a socket (both sold separately) that connect and disconnect quickly. Use them when you need frequent access to a line. All of the International Standard ISO Minimal-Spill quick-disconnect plugs are compatible with any of the International Standard ISO Minimal-Spill quick-disconnect sockets of the same coupling size, regardless of the pipe size. Also known as double shut-off couplings, the plugs and sockets both have a shut-off valve that stops the flow when the coupling is separated. They are zinc-plated steel, which has excellent strength and durability and fair corrosion resistance.
Plugs are also known as nipples.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size. Pressure ratings are given for static (constant) pressure conditions.
Warning: Never attempt to connect or disconnect couplings when operating at maximum pressure. Stop the flow before you disconnect the line.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: -20° to 212° F
- Compatible With: ISO 16028 Parker FEM, ISO 16028 Perfecting HT, ISO 16028 Snap-Tite 74
- Specifications Met: ISO 16028
Beaded Hose Fittings for Coolant
A single rounded bead grips onto hose just like a barb, but has no sharp edges that could cut or damage soft hose. This type of connection can handle higher pressures than standard barbed fittings for coolant. Slide the beaded end into rubber hose and secure with a clamp. Also known as hose nipples, they adapt a beaded end to a threaded end. Fittings are zinc-plated steel, which is strong and durable with fair corrosion resistance.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 100 psi @ 72° F
- Temperature Range: -20° to 255° F
- Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: SAE J1231
Thread | ||||
|---|---|---|---|---|
| For Hose ID | Size | Pitch, mm | Each | |
Zinc-Plated Steel | ||||
| 1/2" | M14 | 1.5 | 0000000 | 000000 |
37° Flared Fittings for Steel Tubing
Male Threads with
Gasket and Washer
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Tubing: Use with seamless steel
- Specifications Met: SAE J514
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately. Fittings are zinc-plated steel for fair corrosion resistance.
To prevent leaks, UN/UNF (SAE Straight) male threads have a gasket. Metric and BSPP male threads have either a gasket or a gasket and washer.
For technical drawings and 3-D models, click on a part number.
Male Threads with
Gasket and Washer
- Temperature Range: See table
| For Tube OD | Thread Size | Thread Pitch, mm | Material | Gasket Material | Washer Material | Max. Pressure | Temp. Range, °F | Each | |
Metric Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/8" | M14 | 1.5 | Zinc-Plated Steel | Buna-N Rubber | __ | 3,600 psi @ 72° F | -30° to 200° | 00000000 | 000000 |
| 3/8" | M14 | 1.5 | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 4,500 psi @ 72° F | -20° to 212° | 00000000 | 00000 |
- Temperature Range: -60° to 400° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°. Sleeves are zinc-plated steel for fair corrosion resistance. They are also known as ferrules.
Inch × metric sleeve adapters convert the fitting from inch to metric.
- Temperature Range: -60° to 400° F
| For Tube OD | Nut Material | Max. Pressure | Each | |
| 3/8" | Zinc-Plated Steel | 4,000 psi @ 72° F | 000000000 | 00000 |
Plastic Barbed Tube Fittings for Air and Water
Fittings have barbs that grip onto tubing.
Nylon fittings have excellent impact and abrasion resistance.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: See table
- Tubing: Semi-Clear: Use with firm or soft (Durometer 45A-80A) polyurethane rubber or PVC plastic
Opaque: Use with firm or soft (Durometer 40A-80A) polyurethane rubber or PVC plastic
Grease Fittings
Thread these fittings into motors, bearings, engine blocks, and other machinery to create a lubrication point. They’re also known as hydraulic grease fittings.
Zinc-plated steel fittings have mild corrosion resistance.
Fittings with a check valve prevent grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
For technical drawings and 3-D models, click on a part number.
Male
Threads
Pkg. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Thread Lg. | Shank Lg. | Hex Size | Max. Pressure, psi | Check Valve Type | Specifications Met | Pkg. Qty. | 1-9 | 10-Up | |
M14 × 1.5 mm Metric Threads | |||||||||||
| Zinc-Plated Steel | 18mm | 6.5mm | 6.5mm | 14mm | 10,000 | Ball | DIN 71412 | 5 | 0000000 | 000000 | 00000 |
M14 × 2 mm Metric Threads | |||||||||||
| Zinc-Plated Steel | 17.5mm | 6.5mm | 6.5mm | 14mm | 1,450 | Ball | DIN 71412 | 5 | 00000000 | 0000 | 0000 |
Pkg. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Thread Lg. | Shank Lg. | Hex Size | Max. Pressure, psi | Check Valve Type | Specifications Met | Pkg. Qty. | 1-9 | 10-Up | |
M14 × 1.5 mm Metric Threads | |||||||||||
| Zinc-Plated Steel | 22mm | 6.5mm | 6.5mm | 14mm | 1,450 | Ball | DIN 71412 | 5 | 00000000 | 000000 | 000000 |
M14 × 2 mm Metric Threads | |||||||||||
| Zinc-Plated Steel | 22mm | 6.5mm | 6.5mm | 14mm | 1,450 | Ball | DIN 71412 | 5 | 00000000 | 00000 | 00000 |
Pkg. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Thread Lg. | Shank Lg. | Hex Size | Max. Pressure, psi | Check Valve Type | Specifications Met | Pkg. Qty. | 1-9 | 10-Up | |
M14 × 1.5 mm Metric Threads | |||||||||||
| Zinc-Plated Steel | 22.5mm | 6.5mm | 6.5mm | 14mm | 1,450 | Ball | DIN 71412 | 5 | 00000000 | 000000 | 000000 |
Button-Head Grease Fittings
Often used on earth movers, mining equipment, and other heavy machinery, these fittings have a T-shaped top that holds the dispensing tip in place so it won’t pop off when adding grease. They're best for machinery requiring high volumes of grease because they let more grease pass through than standard grease fittings, thanks to a larger opening. An integral check valve prevents grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
Zinc-plated steel fittings have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Thread Lg. | Shank Lg. | Hex Size | Head Dia. | Max. Pressure, psi | Check Valve Type | Specifications Met | 1-9 | 10-Up | |
M14 × 1.5 mm Metric Threads | |||||||||||
| Zinc-Plated Steel | 17mm | 6mm | 6mm | 17mm | 16mm | 10,000 | Ball | DIN 3404 | 0000000 | 00000 | 00000 |