How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Threaded Hose Fittings for Compressed Gas
Use these fittings to connect welding hose to pressure regulators and torches. They are also known as CGA (Compressed Gas Association) fittings. Fittings are brass for good corrosion resistance.
Fittings with left-hand threads are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
Female Hose Connection | Male Hose Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CGA Number  | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||||
| 020 | A | 3/8"-24 | UN/UNF (CGA) | Right Hand | 022 | B | 9/16"-18 | UN/UNF (CGA) | Right Hand | Oxygen | 0000000 | 000000 |
| 021 | A | 3/8"-24 | UN/UNF (CGA) | Left Hand | 023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 00000 |
| 022 | B | 9/16"-18 | UN/UNF (CGA) | Right Hand | 020 | A | 3/8"-24 | UN/UNF (CGA) | Right Hand | Oxygen | 0000000 | 00000 |
| 023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 021 | A | 3/8"-24 | UN/UNF (CGA) | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 00000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
Male Hose Connection | Male Pipe Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | Pipe Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||
| 020 | A | 3/8"-24 | UN/UNF (CGA) | Right Hand | 1/4 | NPT | Right Hand | Oxygen | 000000000 | 00000 |
| 021 | A | 3/8"-24 | UN/UNF (CGA) | Left Hand | 1/4 | NPT | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000000 | 0000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
| CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | |||||||
|---|---|---|---|---|---|---|---|
| 021 | A | 3/8"-24 | UN/UNF (CGA) | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000 | 00000 |
Hose Crimping Tool and Fitting Sets for Compressed Gas
Sets contain a crimping tool and a variety of fittings, nuts, and ferrules so you can connect pressure regulators, torches, and other components of your welding system. Fittings are also known as CGA (Compressed Gas Association) fittings. They are brass for good corrosion resistance.
Barbed adapters let you adapt to a threaded end so you can connect welding hose to pressure regulators or torches. They consist of a barbed shaft with a rounded end that sits inside a threaded nut so you can make a threaded hose connection.
Barbed connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose. Slide the barbed end into welding hose and use a hose ferrule and the crimping tool to secure the fitting to hose.
Threaded connectors let you attach threaded welding hose to pressure regulators and torches.
Fittings with left-hand threads are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
| For Hose ID | No. of Pieces | Includes | Max. Pressure | For Use With | Each | |
Brass | ||||||
|---|---|---|---|---|---|---|
| 3/16", 1/4" | 93 | Crimping Tool Eight barbed hose adapters for 3/16" hose ID (use with A-size nuts) Six barbed hose adapters for 3/16" hose ID (use with B-size nuts) Ten barbed hose adapters for 1/4" hose ID (use with B-size nuts) Two barbed hose connectors for 3/16" hose ID Four barbed hose connectors for 1/4" hose ID One A-size 3/8"-24 male right-hand threaded connector (CGA-020) One A-size 3/8"-24 male left-hand threaded connector (CGA-021) One B-size 9/16"-18 male right-hand threaded connector (CGA-022) One B-size 9/16"-18 male left-hand threaded connector (CGA-023) Four A-size 3/8"-24 right-hand threaded nuts (CGA-020) Four A-size 3/8"-24 left-hand threaded nuts (CGA-021) Eight B-size 9/16"-18 female right-hand threaded nuts (CGA-022) Eight B-size 9/16"-18 female left-hand threaded nuts (CGA-023) Twelve ferrules with 0.45" hose end ID Ten ferrules with 0.562" hose end ID Twelve ferrules with 0.593" hose end ID | 200 psi @ 72° F | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 0000000 | 0000000 |
45° Flared Fittings for Copper and Brass Tubing
- Temperature Range: -65° to 250° F
- Tubing: Use with seamless brass and copper that meets ASTM B280
No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They require a nut (sold separately) for each tube end. Fittings are also known as refrigeration and SAE fittings. They are brass for good corrosion resistance.
NPTF (Dryseal) threads are compatible with NPT threads.
Copper tube size is the accepted designation of the copper tubing industry, not the actual tube OD.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except adapters for 1/8" and 1" tube OD are not for use with fuel oil
- Specifications Met: See table
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except nuts for 1" tube OD are not for use with fuel oil
- Specifications Met: SAE J512, SAE J513, UL Listed; except nuts for 1" tube OD meet SAE J512 and SAE J513 only
Grease Fittings
Thread these fittings into motors, bearings, engine blocks, and other machinery to create a lubrication point. They’re also known as hydraulic grease fittings.
Zinc-plated steel fittings have mild corrosion resistance. Brass fittings resist corrosion better than zinc-plated steel fittings. 303 stainless steel fittings are more corrosion resistant than brass fittings and have good chemical resistance.
Fittings with a check valve prevent grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
UNF threads are similar to threads on a machine screw or bolt. They require a sealant, such as an O-ring, to minimize leakage.
For technical drawings and 3-D models, click on a part number.
Male
Threads
Pkg. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Thread Lg. | Shank Lg. | Hex Size | Max. Pressure, psi | Check Valve Type | Pkg. Qty. | 1-9 | 10-Up | |
3/8"-24 UNF Threads | ||||||||||
| Zinc-Plated Steel | 51/64" | 7/32" | 7/32" | 7/16" | 1,450 | Ball | 10 | 00000000 | 00000 | 00000 |
Pkg. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Thread Lg. | Shank Lg. | Hex Size | Max. Pressure, psi | Check Valve Type | Pkg. Qty. | 1-9 | 10-Up | |
3/8"-24 UNF Threads | ||||||||||
| Zinc-Plated Steel | 63/64" | 7/32" | 7/32" | 7/16" | 1,450 | Ball | 10 | 00000000 | 000000 | 000000 |
Pkg. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Thread Lg. | Shank Lg. | Hex Size | Max. Pressure, psi | Check Valve Type | Pkg. Qty. | 1-9 | 10-Up | |
3/8"-24 UNF Threads | ||||||||||
| Zinc-Plated Steel | 63/64" | 7/32" | 7/32" | 7/16" | 1,450 | Ball | 10 | 00000000 | 000000 | 00000 |
Button-Head Grease Fittings
Often used on earth movers, mining equipment, and other heavy machinery, these fittings have a T-shaped top that holds the dispensing tip in place so it won’t pop off when adding grease. They're best for machinery requiring high volumes of grease because they let more grease pass through than standard grease fittings, thanks to a larger opening. An integral check valve prevents grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
Zinc-plated steel fittings have mild corrosion resistance. UNF threads are similar to threads on a machine screw or bolt. They require a sealant, such as an O-ring, to minimize leakage.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Thread Lg. | Shank Lg. | Hex Size | Head Dia. | Max. Pressure, psi | Check Valve Type | 1-9 | 10-Up | |
3/8"-24 UNF Threads | ||||||||||
| Zinc-Plated Steel | 5/8" | 15/64" | 15/64" | 19/32" | 5/8" | 1,450 | Ball | 0000000 | 00000 | 00000 |