Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

Create a streamlined appearance—the flat face lies flush with your wall plate.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation and grip the wire securely. Access the wire connection by opening the hinged housing.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded.

Charge mobile devices without an adapter.

Receptacles protect sensitive equipment from electromagnetic interference (EMI) and spikes in voltage.

Install these receptacles indoors. They keep personnel safe from electric shock by adding ground fault protection.

Prevent damage to electronic equipment caused by spikes in voltage.

Minimize the risk of electric shock and electrical fires with a single receptacle.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation. When mated with a receptacle, these plugs have an extra-tight fit to withstand high vibration. Also known as hospital grade plugs.

Keep personnel safe from electric shock by adding ground fault protection. These receptacles have an extra-tight fit when mated with plugs to withstand high vibration. Also known as hospital grade receptacles.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

Prevent damage to electronic equipment caused by spikes in current. Mount these receptacles to DIN rail.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

Power multiple devices from one power source.

Tug these cords to full length, and they’ll stay plugged in. Also called hospital-grade cords, they form an extra-tight connection with outlets. After stretching, they return to a tight, tangle-free coil.

Create secure, vibration-resistant connections on both ends—these cord splitters have a hospital-grade plug and locking sockets.

Designed for indoor applications, these cords are often used to power appliances.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

These cords work with any Milwaukee tool with a pin socket (Quik-Lok) connection.

Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.

The power switch to these outlet strips is on an extension cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

Keep personnel safe from electric shock with ground fault protection.

Connect multiple devices from a single outlet.

Automatically power heating and cooling devices on and off when temperatures rise or drop.

Mount these strips into standard 19" wide electronics racks and enclosures.

No need for mounting hardware—these outlet strips have magnets on the back to stick to steel walls, cabinets, and other magnetic surfaces.

Power devices above and below your workbench while keeping your outlet strip out of the way.

Run power to welders in machine shops, garages, and other areas where these cords will be exposed to harsh conditions. These cords have either EPDM or PVC insulation that protects the cord's wires from weld slag and being dragged, kicked, and stepped on.

The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

In addition to an outlet on the end, these cords have multiple inline outlets.

Power multiple devices with one extension cord.

Designed for indoor use, these cords are often used to power appliances.

Put overhead outlets in arm’s reach.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

These self-coiling cords return to their retracted length after stretching for tangle-free storage.

Add grounding or surge suppression protection.

Minimize the risk of electric shock by adding ground fault protection to a standard outlet.

These boxes come ready to use with receptacles and/or light switches installed.