Thanks to the nickel-plated brass base on these needles, they can be cleaned, washed, boiled, or sterilized. Attach them to syringes with luer lock or luer slip connection types to dispense liquids.

Needles with a flat tip are the most commonly used and suitable for most applications. They dispense a flat, even bead of liquid.

Often used with septa lids, needles with a beveled tip can be inserted without the needle clogging or leaving a hole. 15° angled needles are good for hard-to-reach areas.

For technical drawings and 3-D models, click on a part number.

Curve these plastic needles to reach into tight spots. They can be cut to the length you need. Unlike metal needles, they’re less likely to clog from instant-bonding adhesives and other sticky liquids. They also won’t scratch your surface when dispensing. Attach them to syringes with luer lock connections.

PTFE needles resist chemicals better than polypropylene needles.

For technical drawings and 3-D models, click on a part number.

Precisely dispense sticky adhesives and liquids. The needle is stainless steel, so it stays rigid during application. It’s coated with slippery PTFE to prevent clogging, even from instant-bonding adhesives. Attach them to syringes that have a luer lock or luer slip connection.

For technical drawings and 3-D models, click on a part number.

To protect sensitive equipment, these needles drain electrostatic discharge (ESD) from the materials they dispense. That means they’re great for applying adhesives to electronics. For a complete static-control syringe, you’ll need one with a static-control barrel. Twist them onto a syringe with a luer lock or luer slip connection. With a flat tip, they’re good for most applications and dispense a flat, even bead of material.

For technical drawings and 3-D models, click on a part number.

Connect these needles to adhesive cartridges, grease guns, and other dispensers with a threaded connection. They can be cleaned, washed, boiled, or sterilized.

Often used with septa lids, sharp beveled needles can be inserted without the needle clogging or leaving a hole. Not for animal or human use.

45° and 90° angled needles are good for hard-to-reach areas.

For technical drawings and 3-D models, click on a part number.

Drain static from the material you’re dispensing from a syringe or other small instrument. These tips protect sensitive equipment from electrostatic discharge (ESD). This makes them ideal for applying adhesives to electronics. For a complete static-control syringe, you’ll need one with a static-control barrel. Twist these tips onto a syringe with a luer lock or luer slip connection.

These tips require less pressure on a syringe plunger when dispensing than syringes with a needle attached. Since they’re tapered, you can trim them to the opening size you need. They work best with medium- to high-viscosity materials—think the same viscosity as maple syrup or honey. Made of polypropylene plastic, these tips won’t scratch your equipment while in use.

For technical drawings and 3-D models, click on a part number.

Style C sampler bottles have a leakproof lid, so they’re good for shipping and storing small samples. After you collect the sample and remove the needle, their membrane automatically seals. They come with a tamper seal label to put over the lid, showing if the bottle is ever opened. They're also phthalate-free.

Sterilized so they won’t contaminate your samples or lines, these liquid samplers are often used in food processing, pharmaceutical, and biotech applications. Unlike traditional sampling methods such as ladles and cups, they don’t expose samples to the surrounding environment. These samplers use gravity to draw out liquid through the needle directly into the bag. The needle has a luer lock connection, so it’s easy to remove the needle after you take the sample. You can also swap the needle out beforehand if your application needs a different kind.

These bags are best for taking large samples. They’re ISO 10993 compliant, so they’re approved for use in medical devices. They meet USP Class VI, meaning they’re made of plastic that’s been tested to the highest standards to reduce the risk of leaching into biological samples. Manufactured free of contaminants and allergens, they are BPA- and latex-free. They’re also TSE/BSE compliant, so they’ve never come into contact with any animal products.

These liquid samplers are typically used with sampling tube fittings.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations. Attach dispensing tips to nozzles.

For technical drawings and 3-D models, click on a part number.