Any-Angle Tilting-Head Bench Vises
![](/prerenderstable/mvPRE/contents/gfx/imagecache/520/52015a67c1-a06a-digital-master1552944295-p9@halfx_636607638115826656.png?ver=imagenotfound)
Two vise heads tilt and rotate 360°, locking in place to hold work at any angle. The arm holding the vise heads tilts 180°.
Jaw | Overall | Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Vise Heads | Wd. | Max. Opening | Material | Texture | Replaceable | Throat Dp. | Lg. | Wd. | Ht. | Wt., lbs. | Mounting Fasteners Included | No. of | Dia. | Each | |
With Flat Jaws | |||||||||||||||
2 | 1 1/2" | 11/16" | Aluminum | Grooved | No | 3/8" | 5" | 4" | 6 1/2" | 3 | No | 2 | 3/16" | 00000000 | 0000000 |
Tilting-Head Bench Vises
The head tilts, rotates, and locks in place to hold work at an angle.
Bolt-on with 1 1/2" jaw width vise has grooved jaws for clamping round and uneven workpieces.
Bolt-on with 2 1/2" jaw width vise can be mounted temporarily using a clamp-on base (sold separately).
Suction-mount vise attaches to smooth surfaces. Use the lever to engage and disengage the rubber suction pad.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/520/52015a66c1-a06a-digital-master1552944294-p9@halfx_636607638247802656.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/846/8464a14c1-a06a-digital-master1552944325-p9@halfx_636607639082092728.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/846/8464a63c1-a06a-digital-master1552944331-p9@halfx_636607638665258656.png?ver=imagenotfound)
Vises | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw | Overall | Mounting Holes | Clamp-On Base | Replacement Suction-Mount Base | ||||||||||||
Wd. | Max. Opening | Texture | Throat Dp. | Lg. | Wd. | Ht. | Wt., lbs. | Mounting Fasteners Included | No. of | Dia. | Each | Each | Each | |||
With Flat Jaws | ||||||||||||||||
Bolt-On Mount | ||||||||||||||||
1 1/2" | 11/16" | Grooved | 3/8" | 5" | 4" | 6 1/2" | 2 | No | 2 | 3/16" | 00000000 | 0000000 | 000000 | 00 | 000000 | 00 |
2 1/2" | 2 1/4" | Smooth | 1/2" | 5" | 5" | 6 1/4" | 2.7 | No | 3 | 5/16" | 0000000 | 00000 | 0000000 | 000000 | 000000 | 00 |
Suction Mount | ||||||||||||||||
2 1/2" | 2 1/4" | Smooth | 1/2" | 6 1/4" | 4 1/2" | 6 1/4" | 2.9 | __ | __ | __ | 0000000 | 00000 | 000000 | 00 | 00000000 | 000000 |
Extra-Wide-Opening Tilting-Head Bench Vises
![](/prerenderstable/mvPRE/contents/gfx/imagecache/846/8464a91c1-a06a-digital-master1552944332-p9@halfx_636607638508946656.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/846/8464a92c1-a06a-digital-master1552944333-p9@halfx_636607638378842656.png?ver=imagenotfound)
For large workpieces, these vises open three times as wide as standard tilting-head vises. The head tilts, rotates, and locks in place to hold your work at an angle. Vises have one smooth jaw and one grooved jaw for clamping flat, round, and uneven workpieces. The 5-lb. weighted base is heavy enough to keep the vise in place but light enough to be portable. For temporary mounting, add a clamp-on base (sold separately).
Vise with self-centering jaws has jaws that move at the same time to keep parts in the center of the vise.
Vise | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw | Overall | Clamp-On Base | |||||||||||||
Wd. | Max. Opening | Material | Texture | Replaceable | Throat Dp. | Lg. | Wd. | Ht. | Wt., lbs. | Base Wt., lbs. | Features | Each | Each | ||
With Flat Jaws | |||||||||||||||
1 1/2" | 6" | Rubber | Serrated and Grooved | Yes | 1 7/8" | 11" | 5" | 7 1/4" | 7.6 | 5 | __ | 0000000 | 0000000 | 0000000 | 000000 |
1 1/2" | 9" | Rubber | Serrated and Grooved | Yes | 1 7/8" | 11 1/2" | 5" | 7 1/2" | 7.7 | 5 | Self-Centering Jaws | 0000000 | 000000 | 0000000 | 00000 |
Rotating-Head Bench Vises
![](/prerenderstable/mvPRE/contents/gfx/imagecache/525/5256a1p2-a06a-digital@halfx_636885239323562497.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/525/5256a1c1-a06a-digital-master1552944304-p9@halfx_636692472852618583.png?ver=imagenotfound)
Rotate the head 360° to use three different vise jaws and lock workpieces in position at 45° intervals. The base also swivels 360° to move the entire vise and can be locked in place. In addition to flat jaws, these vises have two sets of V jaws (also known as pipe jaws) that securely grip pipe and other round objects.
Flat Jaw | For Dia. | Overall | Mounting Holes | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Max. Opening | Material | Texture | V Jaw A | V Jaw B | Throat Dp. | Lg. | Wd. | Ht. | Wt., lbs. | Mounting Fasteners Included | No. of | Dia. | Each | |
With Flat and V Jaws | |||||||||||||||
360° Swivel Base | |||||||||||||||
5 1/8" | 4" | Steel | Serrated | 1/2"-4 1/2" | 1/2"-3 1/2" | 3 1/2" | 16 1/2" | 5 1/4" | 10 3/4" | 58 | No | 3 | 3/8" | 000000 | 0000000 |
Any-Orientation Drill-Press Vises
![](/prerenderstable/mvPRE/contents/gfx/imagecache/522/5226a75p1-a06-digital@halfx_637206608215241150.png?ver=imagenotfound)
The base and three sides of the vise are ground flat, enabling mounting on its base, either side, or upright. Secure directly to your drill press with setup clamps (not included) for drilling, tapping, and reaming applications. Turn the threaded main screw to move the jaw. The open base allows you to drill through the workpiece without hitting the bottom of the vise.
Vises with a smooth and grooved jaw clamp flat, round, and uneven workpieces.
Jaw | |||||||||
---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Max. Opening | Style | Material | Texture | Overall Ht. | Body Lg. | Each | |
Fixed Base | |||||||||
1 1/2" | 1" | 1 1/2" | Flat | Steel | Smooth and Grooved | 1 7/8" | 5 1/8" | 000000 | 0000000 |
2 7/16" | 1 1/2" | 3" | Flat | Steel | Smooth and Grooved | 2 5/8" | 7 1/2" | 000000 | 000000 |
3" | 1 3/4" | 3" | Flat | Steel | Smooth | 3" | 9" | 000000 | 000000 |
4" | 1 3/4" | 4" | Flat | Steel | Smooth and Grooved | 3 1/4" | 10 3/4" | 000000 | 000000 |
6" | 2" | 6" | Flat | Steel | Smooth and Grooved | 3 1/2" | 11 3/8" | 0000000 | 000000 |
Pivoting-Head Drill-Press Vises
![](/prerenderstable/mvPRE/contents/gfx/imagecache/520/5202a15p1-a06-digital@halfx_636880859988237835.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/520/5202a66p1-a06a-digital@halfx_636880866828895168.png?ver=imagenotfound)
Hold work at any angle up to 90°. Loosen the nuts on either side of the vise to tilt and adjust the angle; tighten to lock in place. Mount these vises directly to your drill press for drilling, tapping, and reaming applications. They have one smooth jaw and one grooved jaw for clamping flat, round, and uneven workpieces. Turn the threaded main screw to move the jaw.
Vises with swivel base rotate 360° and can be locked in place.
Jaw | Mounting Holes | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Max. Opening | Style | Material | Texture | Overall Ht. | Body Lg. | Base Graduations | Mounting Fasteners Included | No. of | Dia. | Each | |
Fixed Base | |||||||||||||
2 7/8" | 1 1/2" | 2 1/2" | Flat | Steel | Smooth and Grooved | 3 7/8" | 9" | __ | No | 2 | 1/2" | 0000000 | 0000000 |
360° Swivel Base | |||||||||||||
2 7/8" | 1 1/2" | 2 1/2" | Flat | Steel | Smooth and Grooved | 4 5/8" | 8" | 5° | No | 4 | 1/2" | 0000000 | 000000 |
4" | 1 3/4" | 4" | Flat | Steel | Smooth and Grooved | 6 1/4" | 12" | 1° | No | 2 | 1/2" | 000000 | 000000 |
Static-Control Circuit Board Vises
![](/prerenderstable/mvPRE/contents/gfx/imagecache/571/5711n11-@halfx_gpe79_1719259732.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/571/5711n11-@halfx_di8m3_1719263753.png?ver=imagenotfound)
Rotate these vises to solder both the front and back of your circuit board while preventing static charges from damaging your components. Plastic jaws slowly drain static charges away, minimizing the buildup of electrostatic discharge (ESD). To make soldering components through the holes on your board easier, these vises have a positioning arm that holds your component. This allows you to rotate the board and solder on the opposite side without you needing to hold the component.
Jaw | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Wd. | Max. Opening | Material | Texture | For Max. Circuit Board Thick. | Rotation Range of Motion | Surface Resistance | Rod Material | Features | Each | |
1 11/16" | 9 1/4" | Plastic | Grooved | 5/16" | 360° | 109-1011 ohms | Steel | Positioning Arm | 0000000 | 000000 |
Tilting-Head Circuit Board Vises
![](/prerenderstable/mvPRE/contents/gfx/imagecache/846/8464a48p2-a06a-digital@halfx_636946418618992518.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/846/8464a47-@halfx_1711573869.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/846/8464a48c1-a06a-digital-master1559062986-p9@halfx_636946417926803674.png?ver=imagenotfound)
Position your circuit board at a comfortable angle when attaching components. These vises rotate, so you can access the back of your board.
Vises with soldering spool and soldering iron holders keep your material and tools nearby. The soldering spool holder feeds solder wire as your work. When you need to set down your hot iron, rest it in the holder instead of on your work surface.
Jaw | Mounting Holes | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Max. Opening | Material | Texture | For Max. Circuit Board Thick. | Rotation Range of Motion | Tilt Range of Motion | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Features | Each | |
2" | 2 7/8" | Plastic | Grooved | 5/16" | 360° | 210° | No | 3 | 5/16" | 2 1/2" | __ | 0000000 | 000000 |
6 1/4" | 10" | Aluminum | Grooved | 5/32" | 360° | 90° | No | 3 | 5/16" | 3 3/4" | Six Compartment Tray Base Solder Spool Holder Soldering Iron Holder | 0000000 | 000000 |
Electronic Component Positioning Stands
![](/prerenderstable/mvPRE/contents/gfx/imagecache/554/5541n11-@halfx_gglxu_1719254071.png?ver=imagenotfound)
Hold components against your circuit board to keep your hands free for soldering. The arm on these stands pins your component in place with tension and has enough flexibility to keep a variety of differently sized components steady. For extra stability, the base has a layer of silicone foam to prevent slipping. As you're soldering, the heat from your iron won't melt or damage the silicone tip that’s holding your component.
Overall | Tip | ||||||||
---|---|---|---|---|---|---|---|---|---|
Arm Ht. | Lg. | Wd. | Ht. | Base Material | Material | Temp. Range, °F | Material | Each | |
1/8"-2" | 2 3/4" | 1" | 2" | Silicone Foam | Silicone Rubber | -60° to 400° | ABS Plastic | 0000000 | 00000 |
Bench Vises for Dremel
![](/prerenderstable/mvPRE/contents/gfx/imagecache/472/4729n11p1-in_use@halfx_1707172419.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/472/4729n11p2_in_use-@halfx_1707247522.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/472/4729n11-@halfx_1707172434.png?ver=imagenotfound)
Free up a hand while using your Dremel on a workpiece. You can use these vises in three different ways: hold your Dremel to make it a stationary tool, secure your workpiece in the vise, or remove the clamp and use it on its own. These vises rotate 360° and tilt, so you can work on your project from any angle.
Jaw | Overall | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Max. Opening | Material | Texture | Throat Dp. | Lg. | Wd. | Ht. | Wt., lbs. | For Max. Mounting Surface Thick. | For Manufacturer Model No. | Features | Includes | Each | |
With Flat Jaws | ||||||||||||||
360° Swivel Base | ||||||||||||||
7 1/2" | 7" | Rubber | Grooved | 2 1/4" | 13" | 4 1/4" | 13" | 2.7 | 2 1/2" | 100, 100-N/7, 200, 285, 300, 3000, 3000-1/24, 395, 400, 4000, 4000-2/30, 4200, 800, 8100-N/21, 8200, 8220, 8220-1/28 | Removable Clamp | Tool Holder Ring | 0000000 | 000000 |