Wound, wired, and assembled in the U.S. These motors are manufactured for durability and include high-quality bearings, so they hold up to occasional overload conditions and spikes in torque. Also known as C-face motors, they bolt directly to gearboxes, pumps, and other machinery. They’re more compact than base-mount motors and the direct, rigid connection to your equipment helps keep them aligned. Rated for continuous duty, they’re often used with equipment that requires constant power, like fans, pumps, and conveyors.

When pairing with a variable frequency drive (AC motor speed control), choose a three-phase motor that’s inverter rated.

Open drip proof (ODP) enclosures have vents that let air flow over the motor, which keeps it cool and helps it run efficiently. Use them in clean, dry environments—the enclosure blocks drips and debris that fall from above, but dust and moisture can pass through the vents.

Totally enclosed fan cooled (TEFC) enclosures don’t have vents, so they can be used in damp and dirty environments. They have an external fan that blows air over the outside of the enclosure to keep the motor cool. They’re not airtight, but since air isn’t flowing inside the enclosure, the motor won’t run as efficiently as it would in an open enclosure.

For technical drawings and 3-D models, click on a part number.

Wound, wired, and assembled in the U.S. These motors are manufactured for durability and include high-quality bearings, so they hold up to occasional overload conditions and spikes in torque. Whether you’re switching between jobs or need flexibility during installation, these motors give you a variety of mounting options. Mount the feet to a flat surface or bolt the face directly to a gearbox, pump, or other machinery. You can also do both at once for added stability in applications with high loads or vibration. More compact than our standard NEMA-frame motors, these motors fit better in tight spots. They’re rated for continuous duty, so they’re often used for equipment that requires constant power, such as fans, pumps, and conveyors.

When pairing with a variable frequency drive (AC motor speed control), choose a three-phase motor that’s inverter rated.

Totally enclosed fan cooled (TEFC) enclosures don’t have vents, so they can be used in damp and dirty environments. They have an external fan that blows air over the outside of the enclosure to keep the motor cool. They’re not airtight, but since air isn’t flowing inside the enclosure, the motor won’t run as efficiently as it would in an open enclosure.

For technical drawings and 3-D models, click on a part number.

These motors are rated for environments where hazardous material is present. They are continuous duty and mount horizontally. You can wire for clockwise or counterclockwise rotation; instructions are included. The base is welded to the enclosure.

Motors with automatic overload protection turn off in overload conditions to prevent motor damage and start automatically after they cool.

Hazardous location environmental ratings indicate whether manufacturers have included safety features in products to facilitate their safe use in a hazardous environment. Before selecting a product for a hazardous location, ensure it is rated for your environment.

For technical drawings and 3-D models, click on a part number.

Sized for small spaces, these gearmotors mount from the base or face for flexibility to fit in tight locations. Each has a motor matched with a speed reducer to lower speed while increasing torque. An optional plastic fan is included to improve cooling when using the gearmotor in a clockwise direction.

To reverse the direction of the gearmotor, loosen the mounting screws, remove the stator, and rotate it 180°. You’ll also need to replace the original fan blades with fan blades for counterclockwise shaft rotation (sold separately).

For technical drawings and 3-D models, click on a part number.

Power equipment in applications with limited space. Gearmotors have a motor matched with a speed reducer to lower speed while increasing torque. An optional plastic fan is included to improve cooling when using the gearmotor in a clockwise direction.

To reverse the direction of the gearmotor, loosen the mounting screws, remove the stator, and rotate it 180°. You’ll also need to replace the original fan blades with fan blades for counterclockwise shaft rotation (sold separately).

For technical drawings and 3-D models, click on a part number.