These switches are housed in a plastic enclosure. Since they’re already protected, you can mount them to a wall if there’s no space left in your electrical panel. You can also turn them into a handheld control and move them around your workstation by attaching a cord and cord grip. The enclosure is PBT polyester, so it won’t swell in moist environments. Easy to operate even if you’re wearing gloves, flip the toggle switch up and down. Use these switches to turn motors on and off, or with lighting and electric heat circuits. They do not provide overload protection.

For technical drawings and 3-D models, click on a part number.

Safely turn motors on and off near ignitable gases and dust—the housing on these switches seals in anything that could ignite flammable material. Made from aluminum, the housing is lightweight and durable. It guards against water, oil, and other materials that could cause damage. Even in harsh conditions, there’s no need to mount these switches inside an electrical panel.

You need to grip and twist the lever to actuate these switches, so they won’t accidentally turn on or off if something bumps into them. In addition to starting and stopping motors, they work with other circuits, such as lighting and electric heat circuits. They don’t provide overload protection.

For technical drawings and 3-D models, click on a part number.

Start and stop motors outdoors and in other wet environments. Rated NEMA 3R, these switches seal out rain and light splashes. They’re housed in a protective aluminum enclosure, so you don’t need to mount them inside an electrical panel. The enclosure is lighter in weight than stainless steel enclosures yet still stands up to water and oil.

In addition to turning motors on and off, these switches work with other circuits, such as lighting and electric heat circuits. They do not provide overload protection.

For technical drawings and 3-D models, click on a part number.

Save electricity and extend motor life by reducing the motor's starting current. These starters gradually start and stop motors. Use them on motors where torque varies, such as pumps, compressors, and conveyors. All have an auxiliary contact to send a signal or connect to another device, such as an alarm or indicating light.

For technical drawings and 3-D models, click on a part number.

The IP66 rated housing not only shields these switches from washdowns but also makes them durable enough to be mounted outside of an electrical panel. These switches cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance.

Switches with lockout secure in the off position with a padlock with a maximum shackle diameter of 5/16” (not included).

Use additional power poles to control more than three circuits.

For technical drawings and 3-D models, click on a part number.

With a housing that’s designed to contain an explosion, these switches are safe to use in areas where ignitable concentrations of flammable or combustible gas, dust, or fibers may be present. They meet NEC Class I Div. 1 and 2, Groups B, C, D, and Class II, Div. 1 and 2, Groups E, F, and G. Use them to cut power and keep it isolated, so equipment won’t accidentally start up during inspection or maintenance.

Made from aluminum, these switches also resist corrosion in wet or oily areas. They have a lockout, so you can secure them in the off position with a padlock (not included).

For technical drawings and 3-D models, click on a part number.

Protected by a steel enclosure, these switches withstand tougher conditions than switches in a plastic housing. Also known as safety switches, they have quick-make/quick-break action to eliminate arcing and prolong switch life. They have a lockout to secure in the off position using a padlock (not included).

Switches with safety interlock keep the door closed when the switch is on and prevent the switch from turning on when the door is open.

Switches with a fuse holder are used where overload protection is needed. When the current exceeds the fuse’s rating, the fuse will blow, interrupting the circuit to prevent the switch from overheating, breaking, or causing a fire. These switches require rejection-style fuse clips when used with UL Class RK1, RK5, or T fuses. Note: Horsepower ratings are based on time-delay fuses installed.

Switches with a viewing window let you see if the fuses have blown without opening the enclosure.

For technical drawings and 3-D models, click on a part number.

A raintight NEMA 3R rated enclosure protects these switches from falling liquids and light splashing. The enclosure is steel, so it withstands tougher conditions than plastic enclosures. All have quick-make/quick-break action to eliminate arcing and prolong switch life. They have a lockout to secure in the off position using a padlock (not included).

Switches with safety interlock keep the door closed when the switch is on, and prevent the switch from turning on when the door is open.

Use switches with a fuse holder where overload protection is needed. When the current exceeds the rating of the fuse, it blows. This interrupts the circuit and prevents overheating, damage, and fire. When used with UL Class RK1, RK5, or T fuses, they require rejection-style fuse clips. Note: Horsepower ratings are based on time-delay fuses installed.

Switches with a viewing window let you see if the fuses have blown without having to open the enclosure.

For technical drawings and 3-D models, click on a part number.

Able to withstand high currents, these switches are often used with motors and pumps.

Switches with an on-on position designation alternate power between sets of terminals.

For technical drawings and 3-D models, click on a part number.

Able to withstand high currents, these switches are often used with motors and pumps.

Switches with an on-on position designation alternate power between sets of terminals.

For technical drawings and 3-D models, click on a part number.

Your standard light switches—these switches stick out of your mounting surface and flip on and off. They also work with AC motor loads up to 80% of the current rating. All fit standard wall plates (not included).

Wall switch lockouts (sold separately) mount over switches to secure them in the on or off position.

For technical drawings and 3-D models, click on a part number.