Cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. These switches are housed in a protective enclosure that resists denting, chipping, and cracking. Mount them to the wall when you run out of space in an electrical panel.

Switches with lockout secure in the off position with a padlock with a maximum shackle diameter of 5/16” (not included).

Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.

Use additional power poles to control more than three circuits. Add neutral poles to open and close the neutral leg of a three phase system.

For technical drawings and 3-D models, click on a part number.

With a housing that’s designed to contain an explosion, these switches are safe to use in areas where ignitable concentrations of flammable or combustible gas, dust, or fibers may be present. They meet NEC Class I Div. 1 and 2, Groups B, C, D, and Class II, Div. 1 and 2, Groups E, F, and G. Use them to cut power and keep it isolated, so equipment won’t accidentally start up during inspection or maintenance.

Made from aluminum, these switches also resist corrosion in wet or oily areas. They have a lockout, so you can secure them in the off position with a padlock (not included).

For technical drawings and 3-D models, click on a part number.

Install these switches in a panel cutout. They cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. All are UL listed, C-UL listed, and CE marked—they meet American, Canadian, and European safety standards.

Switches with lockout secure in the off position with a padlock with a maximum shackle diameter of 5/16” (not included).

Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.

Use additional power poles to control more than three circuits. Add neutral poles to open and close the neutral leg of a three phase system.

Terminal covers prevent contact with live terminals.

For technical drawings and 3-D models, click on a part number.

Protected by a steel enclosure, these switches withstand tougher conditions than switches in a plastic housing. Also known as safety switches, they have quick-make/quick-break action to eliminate arcing and prolong switch life. They have a lockout to secure in the off position using a padlock (not included).

Switches with safety interlock keep the door closed when the switch is on and prevent the switch from turning on when the door is open.

Switches with a fuse holder are used where overload protection is needed. When the current exceeds the fuse’s rating, the fuse will blow, interrupting the circuit to prevent the switch from overheating, breaking, or causing a fire. These switches require rejection-style fuse clips when used with UL Class RK1, RK5, or T fuses. Note: Horsepower ratings are based on time-delay fuses installed.

Switches with a viewing window let you see the switch position without opening the enclosure.

For technical drawings and 3-D models, click on a part number.

A raintight NEMA 3R rated enclosure protects these switches from falling liquids and light splashing. The enclosure is steel, so it withstands tougher conditions than plastic enclosures. All have quick-make/quick-break action to eliminate arcing and prolong switch life. They have a lockout to secure in the off position using a padlock (not included).

Switches with safety interlock keep the door closed when the switch is on, and prevent the switch from turning on when the door is open.

Use switches with a fuse holder where overload protection is needed. When the current exceeds the rating of the fuse, it blows. This interrupts the circuit and prevents overheating, damage, and fire. When used with UL Class RK1, RK5, or T fuses, they require rejection-style fuse clips. Note: Horsepower ratings are based on time-delay fuses installed.

Switches with a viewing window let you see the switch position without opening the enclosure.

For technical drawings and 3-D models, click on a part number.

Install these switches inside an enclosure to prevent it from opening when power is on—turn the switch to disconnect power and release the door. Cut the shaft to fit the enclosure. Use a padlock (not included) to lock switches in the off position. Mount to DIN rail inside an enclosure; mounting depth is the distance from the panel door to the DIN rail. All meet at least one safety standard.

Switches with a fuse holder are used where overload protection is needed. When the current exceeds the fuse's rating, the fuse will blow, interrupting the circuit to prevent the switch from overheating, breaking, or causing a fire.

Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.

Use optional sealing gaskets in washdown environments; they create an IP65 rated seal around the actuator.

Use additional power poles to control more than three circuits. Add neutral poles to open and close the neutral leg of a three-phase system.

Add junction blocks to connect a ground wire.

Terminal covers prevent contact with live terminals.

Keep power running while you access your enclosure. Unlike standard enclosure disconnect switches, which shut off power as you open your enclosure, these have an override function. Engaging the override allows you to take voltage reading, troubleshoot an error code, or fine tune the speed of your line. When the override is off, these work like a standard disconnect switch—a safety interlock prevents your enclosure from opening when power is on. The interlock also prevents the switch from turning on when the door is already open. Cut the shaft to fit your enclosure. All have a lockout so you can secure them in the off position with a padlock (not included).

Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.

Use additional power poles to control more than three circuits. Add neutral poles to open and close the neutral leg of a three-phase system.

Add junction blocks to connect a ground wire.

Terminal covers prevent contact with live terminals.

For technical drawings and 3-D models, click on a part number.

Often used in electrical enclosures, these switches mount directly to DIN rails. They cut power and keep it isolated to stop equipment from starting up during inspection and maintenance. For an extra level of security, add a padlock (not included) to lock out the actuator lever in the Off position.

Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.

Use additional power poles to control additional circuits. Add neutral poles to open and close the neutral leg of a three-phase system.

Add junction blocks to connect a ground wire.

Terminal covers prevent contact with live terminals.

For technical drawings and 3-D models, click on a part number.