Use these switches to turn motors on and off, or with lighting and electric heat circuits. They do not provide overload protection.

Safely turn motors on and off near ignitable gases and dust—the housing on these switches seals in anything that could ignite flammable material.

Install these switches in areas with oil, coolant, corrosive chemicals, and regular washdowns. They're rated IP69K and NEMA 4X and 12 or 12K.

Use these switches with motors that run forward and backward, such as motors for conveyor belts.

Operated by hand, these starters are more compact than electrically actuated motor starters; use them when multiple motor circuits are housed in one panel.

Combine a switch and a thermal overload element to build a starter that can handle high-current-rated motors. Also known as a NEMA starter.

Sized to fit in tight spaces, these starters have a shorter height and narrower depth than most other starters.

With a shallower depth than most other starters, these fit in narrow spaces.

Rated NEMA 4X, these enclosed starters are protected from corrosion and washdowns.

Housed in a durable steel enclosure.

Mount these monitors to DIN rail.

Small yet mighty, these switches are about as tall and wide as an index card yet durable enough to mount directly to a wall.

The IP66 rated housing not only shields these switches from washdowns but also makes them durable enough to be mounted outside of an electrical panel.

With a housing that’s designed to contain an explosion, these switches are safe to use in areas where ignitable concentrations of flammable or combustible gas, dust, or fibers may be present.

Rated IP69K, these switches are protected from high-pressure and high-temperature washdowns.

A raintight NEMA 3R rated enclosure protects these switches outdoors.

Keep power running while you access your enclosure. Unlike standard enclosure disconnect switches, which shut off power as you open your enclosure, these have an override function.