Use these switches to turn motors on and off, or with lighting and electric heat circuits. They do not provide overload protection.

Safely turn motors on and off near ignitable gases and dust—the housing on these switches seals in anything that could ignite flammable material.

Designed to mount on an electrical enclosure, these switches control motors, lighting, and electric heat circuits.

Assemble your own motor starter by combining a switch and a thermal overload element.

The NEMA 4X rated enclosure protects these starters from corrosion and washdowns.

Provide on/off control for a motor and protect it from overloads. These starters shut the motor off if current exceeds the full-load current rating.

Use these starters with motors that run forward and backward, such as motors for conveyor belts.

Small yet mighty, these switches are about as tall and wide as an index card yet durable enough to mount directly to a wall.

The IP66 rated housing not only shields these switches from washdowns but also makes them durable enough to be mounted outside of an electrical panel.

Protected by a steel enclosure, these switches withstand tougher conditions than switches in a plastic housing. Also known as safety switches, they have quick-make/quick-break action to eliminate arcing and prolong switch life.

Install these switches inside an enclosure to prevent it from opening when power is on—turn the switch to disconnect power and release the door.

Prevent motors and other equipment from overheating or failing from not having enough voltage. When the supply voltage falls below 35% of the rated voltage, these switches will automatically turn off to protect the circuit from undervoltage.