Control lights on a single circuit from more than one motion-sensing switch. Also known as occupancy sensors, these controls turn lights on when movement is detected and off when an area is unoccupied. The infrared sensors detect changes in heat sources and require a direct view of the occupants. Use up to four controls on the same circuit to detect motion in large rooms. All have a time delay to turn lights off after a set time.

Protect sensors from damage and prevent tampering—these guards won’t trip or block the sensors.

Heads adjust to any angle to direct light where needed. These lights automatically turn on when the sensor detects motion. Lights turn off when an area is unoccupied.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other technologies.

Style A produce a neutral white light. They detect motion up to 70 feet away.

Style B detect motion up to 68 feet away. They are compatible with LED, halogen, and incandescent bulbs (sold separately).

Style C are battery-operated—use where you don't have access to electricity. These lights emit a cool light appearance, which highlights white/blue tones creating good visibility at night. They detect motion up to 30 feet away.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces. They turn on when they detect motion. These lights use a built-in LED bulb that lasts longer, is more efficient, and generates less heat than alternatives. The solar panel is built into the top of the lights, so there’s no need to run wire between the two. These lights must be mounted in the sun so they can charge during the day.

Styles B and C are protected from low-pressure jets of liquid such as water from a garden hose.

Don’t waste energy lighting unoccupied spaces—these lights turn on when they detect movement. Set them to turn off after 30 or 180 seconds. They can be also be set to turn on in fully dark spaces or in those with some ambient light. Turn off the sensor to use as a regular ceiling light. Commonly used in hallways and small storage spaces, they have built-in LEDs, which are more efficient, and generate less heat than other light technologies. They also emit a neutral white light often found in workspaces. These lights meet NFPA 70, which means they’ve passed strict safety standards.

Mount these fixtures where you need light but don't have an electrical connection. They turn on when movement is detected and off when an area is unoccupied, so they work well in hallways and small storage areas. Long-lasting and energy efficient, these lights have built-in LEDs. They emit a neutral white light often found in workspaces. A prismatic, frosted lens disperses light evenly.

Use sun energy to bring light to remote areas and storage spaces without electrical wiring. These lights come with a solar panel to recharge their battery. Simply connect the lights to the panel and place the panel in full sunlight to charge. To power the battery faster, you can also plug these lights into a charger using the included USB cable. A USB output port allows you to power other smart devices and accessories with these lights, as well.

All lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a neutral light appearance that’s often found in workspaces. An impact-resistant plastic lens protects the LEDs. You can dim these lights to conserve battery life. To use them as a security light in unsupervised areas at night, set them to auto mode—they’ll turn on automatically in the dark or when they detect motion.

Use the included mounting holes and brackets to secure these lights permanently to the wall, or hang them temporarily with the included fold-out D-rings. The solar panel also has a mounting bracket to secure the panel to horizontal and vertical surfaces. It’s adjustable, so you can rotate and tilt the panel to achieve the best angle for maximum sunlight exposure.

These lights cannot be sold to Canada due to energy efficiency regulations.

Illuminate your electronics cabinets and racks with long-lasting LED lights. These lights are efficient and won’t add heat to your cabinet, protecting your electronics. Turn on the lights with either the switch or the motion sensor, which saves energy by lighting the cabinet only when you’re working. Connect a door switch (sold separately) to turn the light on when the door is open, like a refrigerator.

These lights are designed for rails with square holes and snap in without tools. If your cabinet or rack is exposed to vibration and movement, anchor the lights with screws for extra security. A rotating socket helps fit the power cable in crowded spaces.

For technical drawings and 3-D models, click on a part number.

No electricity or batteries are needed—as your door opens, the magnet and contact disc are separated, sounding a mechanical chime. The chime can be deactivated.

A chime announces when someone passes through the infrared light beam and a counter keeps track of each entrance and exit. Mount the transmitter and beam reflector between 2 and 20 feet apart. The chime's volume is adjustable up to 85 dB. It cannot be sold to California due to local energy efficiency regulations.

Additional chimes (sold separately) can be added to the transmitter.

This alarm plays a recorded message when it detects someone passing within 6 1/2 feet.

By detecting body heat, these modules sense when people are moving. Connect them to your development board to integrate them into alarm systems, automated lighting, and other applications.

Modules with an adjustable infrared motion sensor let you expand or lower the sensing distance. To connect them to a device, solder wires or headers to them.

Modules with a fixed infrared motion and thermal sensor can detect if a person is moving or even just present within the sensing distance. That means you could use them to automate lighting in an office where workers are sitting still. To connect them to your device, solder on wires or headers. For a solderless connection, use a Qwiic cord.

To startle and deter animals from outdoor areas, these sprayers shoot a sudden jet of water when they sense activity. The built-in motion sensor detects movement within a 120° angle, up to 33 ft. away. Solar powered and compatible with standard garden hoses, sprayers are low maintenance and easy to install.

Detect leaks and contamination while keeping both your hands free. These headlamps use UV light to reveal dyes, particles, and chemicals with fluorescent qualities, making cracks and defects easy to spot. Each headlamp also has a regular LED light to see in dim and dark areas. Both bulbs emit a focused, uniform light beam that works best for close-up inspections.

Headlamps with a motion sensor switch between brightnesses, beam patterns, and bulb types with a wave of your hand. They’re helpful when your gloves are oily or dirty. You can also press a button to switch between these modes. The additional bull’s eye beam pattern has a wide angle to illuminate at a distance.