With a rubber-encased housing and stainless steel bracket, these switches resist vibration and corrosion. They’re rated IP68 for protection from dust and temporary submersion. To minimize arcing and prevent contacts from sticking, they open and close circuits quickly. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

Rated NEMA 4 and IP66, these enclosed switches have a sealed actuator for protection from washdowns. They open and close circuits quickly to minimize arcing and prevent contacts from sticking.

For technical drawings and 3-D models, click on a part number.

Enclosures protect these snap-acting switches from the environment. They open and close circuits quickly to minimize arcing and prevent contacts from sticking. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

Switches with a plunger actuator require a push to actuate.

Switches with a roller plunger, cross roller plunger, or roller lever actuator allow parts to glide across the actuation surface with less friction than standard plungers or levers. This prevents wear and tear over time.

Switches with a lever actuator have an arm that increases the size of the actuation surface.

For technical drawings and 3-D models, click on a part number.

Keep out dirt and moisture—the sealed housing on these switches is watertight and meet MIL-PRF-8805. They’re sized to fit in the tiniest of spaces. To minimize arcing and prevent contacts from sticking, they open and close circuits quickly. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

Switches with a plunger actuator require a push to actuate.

Switches with a roller lever actuator allow parts to glide across the actuation surface with less friction than standard levers.

For technical drawings and 3-D models, click on a part number.

Rated IP67, these switches have an enclosure that shields their interior during temporary submersion. They open and close circuits quickly to minimize arcing and keep contacts from sticking. These switches are often used as door-open indicators on enclosures or as an internal component in limit, pressure, and temperature switches.

All switches are actuated by pushing a plunger. Switches with a roller plunger actuator allow parts to glide across the actuation surface with less friction than standard plungers.

For technical drawings and 3-D models, click on a part number.

Smaller than standard size snap-acting switches, these fit in tight spaces. They open and close circuits quickly to minimize arcing and prevent contacts from sticking. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

Built for tight spaces exposed to water, these switches have a housing that's less than 1" long and IP67 rated for protection from temporary submersion. They open and close circuits quickly to minimize arcing and prevent contacts from sticking. They’re often used as door-open indicators on appliances and enclosures or as internal components in limit, pressure, and temperature switches.

Switches with a plunger actuator require a push to actuate.

Switches with a lever actuator have an arm that increases the size of the actuation surface.

Switches with a roller lever actuator allow parts to glide across the actuation surface with less friction than standard levers. This prevents wear and tear over time.

For technical drawings and 3-D models, click on a part number.

At least 25% smaller than our Miniature Snap-Acting Switches, these switches are often used to trigger actions from inside a vehicle’s door or an engine compartment. They open and close circuits faster than other switches, preventing contacts from sticking by reducing the time that they're near one another. They also minimize the chance of arcing, so electricity won’t jump across contacts.

Plunger actuator switches send a signal when the actuator is pushed directly downward. They have the smallest actuator of the actuators here, reducing the risk of accidental switching.

Lever actuator switches have a larger surface area than plunger actuator switches and can be pushed down by front-to-back movement, so they require less precision to activate.

Roller lever actuator switches allow parts to glide across the actuation surface with less friction than standard levers. This prevents wear and tear over time.

Simulated roller lever actuator switches have a curved arm that can be pressed down for actuation by forward, backward, and repeated back-and-forth movement.

For technical drawings and 3-D models, click on a part number.