We will reply to your message within an hour.
More
Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.
The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.
Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.
Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.
Use these filters to extend the service life of air-powered tools and then throw them away when you're done.
Mount these filters to a 35 mm DIN rail with the included brackets.
A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.
Assembled, inspected, and packaged in a clean environment, these filters come sealed in anti-static double bags.
An automatic drain discharges up to 300 gallons per hour to handle compressed air with high moisture content.
Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers.
Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.
Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.
A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents.
Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.
Use these filters to extend the service life of air-powered tools and equipment and then throw them away when you're done.
Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.
Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.
Generate clean air for instrumentation and applications with critical air requirements.
Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.
Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.
Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.
No need to buy and service two filters—these filters have a single element that removes both large and fine particles.
A float-operated drain valve on these separators automatically opens when the bowl begins to fill. The first step in water removal, use one of these separators to remove the large amount of water as compressed air cools.
These separators have higher flow rates compared to our other compressed air separators. Prevent equipment damage and wear caused by moisture in your compressed air supply. The first step in water removal, use one of these separators to remove the large amount of water created as compressed air cools.
In addition to removing large amounts of water, these separators also remove particles and oil droplets. Place them after your compressor and aftercooler, or at the point of use in applications that don't require an aftercooler.
When water is condensed out of a compressed air system, it contains oil from the compressor that makes disposal difficult. These separators use two-stage filtration to reduce oil content to below 20 parts per million.
A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.
Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.
With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.
A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.
No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.
A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.
Mount these filter/regulators to a 35 mm DIN rail with the included brackets.
An oil filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
Separators remove 99% of particles from air, gas, and steam lines and have no filter cartridges or baskets to clean and replace.
Improve vacuum system efficiency and protect components from moisture—these separators remove over 90% of water from air.
Remove contaminants, moisture, and other particles from steam that will touch food and for final filtering in pharmaceutical, biotech, and electronics applications.
Keep oil burners operating efficiently with clean oil.
These filter housings are made of durable zinc and clear plastic, so you can monitor collecting debris without stopping flow.
These filter housings come with a cartridge that removes particles, rust, scale, and sediment from gasoline and diesel fuel, including fuels with ethanol.
Remove contaminants from culinary steam—steam that sanitizes food and beverage processing equipment—with these corrosion-resistant filter housings.
Made from pure polypropylene, this filter housing doesn't contain fillers, colorants, or plasticizers that can leach into deionized water.
Mount to the top of a tank to clean hydraulic fluid in return lines.
Remove moisture, odors, and particles from your compressed air line before they reach respirators.