Stainless Steel Inline Pipe Mixers
Use for pH control and chlorination. These mixers are more chemical resistant than nylon mixers. Also known as static mixers, they install in your pipeline and mix liquid as it passes over fixed spiral blades. They have no moving parts and require no external power source.
Number of Blades—Follow these steps to determine your Reynolds number, which indicates if you need a mixer with 6 or 12 blades.
1. Multiply flow rate (gpm) by 3,157
2. Multiply specific gravity by total of Step 1
3. Multiply viscosity (cp) by pipe ID (inches)
4. Divide total of Step 2 by total of Step 3
For technical drawings and 3-D models, click on a part number.
Pipe Size | Thread Type | Gender | Lg. | For Use With | Each | |
6 Blades—Reynolds Number 1,000 and Above | ||||||
|---|---|---|---|---|---|---|
| 1/4 | NPT | Male | 3" | Oil, Wastewater | 0000000 | 0000000 |
| 3/8 | NPT | Male | 4" | Oil, Wastewater | 0000000 | 000000 |
| 1/2 | NPT | Male | 5" | Oil, Wastewater | 0000000 | 000000 |
| 3/4 | NPT | Male | 7" | Oil, Wastewater | 0000000 | 000000 |
| 1 | NPT | Male | 9" | Oil, Wastewater | 0000000 | 000000 |
| 1 1/2 | NPT | Male | 13" | Oil, Wastewater | 0000000 | 000000 |
| 2 | NPT | Male | 17" | Oil, Wastewater | 0000000 | 000000 |
12 Blades—Reynolds Number 500-1,000 | ||||||
| 1/4 | NPT | Male | 6" | Oil, Wastewater | 0000000 | 000000 |
| 3/8 | NPT | Male | 8" | Oil, Wastewater | 0000000 | 000000 |
| 1/2 | NPT | Male | 10" | Oil, Wastewater | 0000000 | 000000 |
| 3/4 | NPT | Male | 13" | Oil, Wastewater | 0000000 | 000000 |
| 1 | NPT | Male | 17" | Oil, Wastewater | 0000000 | 000000 |
| 1 1/2 | NPT | Male | 26" | Oil, Wastewater | 0000000 | 000000 |
| 2 | NPT | Male | 33" | Oil, Wastewater | 0000000 | 00000000 |
Inline Tube Mixers
These mixers have unthreaded ends that can be secured with compression or push-to-connect fittings. Materials mix as they pass over the fixed spiral blades. They require no external power source.
For technical drawings and 3-D models, click on a part number.
Tube | ||||||||
|---|---|---|---|---|---|---|---|---|
| OD | ID | Lg. | Blade Material | Body Material | Max. Temperature, °F | For Use With | Each | |
21 Blades | ||||||||
| 0.188" | 0.132" | 6" | 316 Stainless Steel | 316 Stainless Steel | 300° | Oil, Solvent, Wastewater, Water-Based Liquid | 0000000 | 0000000 |
| 0.375" | 0.319" | 11" | 316 Stainless Steel | 316 Stainless Steel | 300° | Oil, Solvent, Wastewater, Water-Based Liquid | 0000000 | 000000 |
| 0.500" | 0.430" | 16 3/8" | 316 Stainless Steel | 316 Stainless Steel | 300° | Oil, Solvent, Wastewater, Water-Based Liquid | 0000000 | 000000 |
32 Blades | ||||||||
| 0.375" | 0.319" | 17" | 316 Stainless Steel | 316 Stainless Steel | 300° | Oil, Solvent, Wastewater, Water-Based Liquid | 0000000 | 000000 |
| 0.500" | 0.430" | 24 3/4" | 316 Stainless Steel | 316 Stainless Steel | 300° | Oil, Solvent, Wastewater, Water-Based Liquid | 0000000 | 000000 |
34 Blades | ||||||||
| 0.250" | 0.194" | 11 1/2" | 316 Stainless Steel | 316 Stainless Steel | 300° | Oil, Solvent, Wastewater, Water-Based Liquid | 0000000 | 000000 |
Injectors
Also known as injection quills, use these in applications where the line can be shut down to perform maintenance and cleaning.
For technical drawings and 3-D models, click on a part number.
Outlet | Inlet | Valve | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Gender | Tube Lg. | Tube Material | Pipe Size | Thread Type | Gender | Lg. | Lg. | Retractable | Seal Material | Max. Pressure, psi | Material | Type | Each | |
For Wastewater | ||||||||||||||||
| 1/2 | NPT | Male | 6" | 316 Stainless Steel | 1/2 | NPT | Male | 3 1/4" | 9 1/4" | Nonretractable | EPDM Rubber | 1,500 | 316 Stainless Steel | Check | 0000000 | 0000000 |
Easy-Maintenance Injectors
A ball valve allows you to isolate the flow to minimize spillage. Outlet tubes can be removed for maintenance and cleaning without shutting down the line. To remove the tube from the pipe, loosen the compression fitting and retract it until the limit chains are taught. Then, close the ball valve and unhook the limit chains. There may be spillage if the process pipe is under pressure.
For technical drawings and 3-D models, click on a part number.
Outlet | Inlet | Valve | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Gender | Tube Lg. | Tube Material | Pipe Size | Thread Type | Gender | Lg. | Lg. | Retractable | Seal Material | Max. Pressure, psi | Material | Type | Each | |
For Wastewater | ||||||||||||||||
| 3/4 | NPT | Male | 6" | 316 Stainless Steel | 3/8 | NPT | Male | 11" | 17" | Retractable | EPDM Rubber | 250 | 316 Stainless Steel | Ball | 0000000 | 000000000 |
| 1 | NPT | Male | 6" | 316 Stainless Steel | 1/2 | NPT | Male | 12 1/2" | 18 1/2" | Retractable | EPDM Rubber | 250 | 316 Stainless Steel | Ball | 0000000 | 00000000 |