Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing.

Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape.

With a large number of teeth, these blades make smooth cuts across the wood grain for a finish that needs minimal sanding.

Produce smooth cuts in plastic materials including polycarbonate, polyurethane, PVC, and acrylic with the carbide-tipped teeth on these blades.

The edge of the blade is segmented to cut faster than a continuous edge.

The edge of the blade is segmented to cut faster than a continuous edge.

Use with water or coolant to produce smoother cuts in tile than dry-cutting blades. They're also for use on glass.

Cut wood, plywood, and particleboard.

Cut through hidden nails in reclaimed lumber. The carbide-tipped steel teeth on these blades are designed to handle impact as they cut across and with the grain (ripping).

A blend of tungsten carbide and diamond grits on the continuous edge of these blades cuts hard, nonmetallic materials including composites and graphite.

The edge of the blade is segmented to cut faster than a continuous edge.

The edge of the blade is segmented to cut faster than a continuous edge.

A razor-sharp knife edge minimizes dust and makes quick, clean cuts through foam sheets such as expanded polystyrene insulation and extruded polystyrene.

The carbide-grit edge on these blades cuts brittle and abrasive materials including glass and fiberglass.

Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades.

Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide.