One side of these sheets is polished to either a brushed or mirror-like finish.

One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish.

Polished on one side to a reflective, mirror-like finish.

Polished on one side to a reflective, mirror-like finish.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Widely used for vehicle interiors and equipment housings, this blended material maintains its physical properties after thermoforming. It is comparable to Kydex.

The combination of high strength and water resistance, along with a variety of color choices, makes this opaque cast acrylic useful for outdoor signs and containers. It's also known as Lucite and Plexiglas® Acrylic.

Because this film dissipates heat, it is often used for printed circuit boards and power supplies.

When compared to uncoated cast acrylic, this clear-coated cast acrylic is 45 times more scratch resistant.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

Modified for increased impact strength over other types of acrylic, this acrylic is often used for skylights and outdoor signs.

Polyester absorbs almost no moisture and resists swelling in wet environments. It is also known as PET and PETE.

Also known as frisket film, this polypropylene has a low-tack adhesive that releases without leaving residue behind.

Mirrored polycarbonate resists damage caused by impact.

Made of FDA-listed materials, these sheets and strips are for use with food.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

Even after repetitive compression, these super-soft sheets and strips maintain their cushioning ability. Use them to dampen noise and isolate vibration.

Made from FDA-listed materials for use with food.

Sunlight, ozone, and water won’t affect these sheets and strips.

Buna-N rubber resists fuel oil, hydraulic oil, ethylene glycol, and grease.

Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.

Stretch these magnetic strips over corners and irregular surfaces.

Cut these sheets to the shape you need for a custom fit.

Use these clear sheets for strong, invisible bonds.

Low-pile velvet cushions surfaces and absorbs sound. Use it between parts and in acoustic applications.

This abrasion-resistant fabric sheds molten metal spatter when placed at an incline of 15° or greater. Use as a welding curtain.

Line toolboxes and drawers to cushion and protect small parts.

These sheets and strips will bounce back to shape, even after extended compression.

One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

Made of a blend of neoprene and EDPM, these foam sheets and strips resist water, sunlight, and oxidation.

These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.

Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

Good for tough vacuum-sealing and low closure-force applications, these polyurethane foam sheets and strips have open/closed cells to keep water, air, and gases from being absorbed when they are compressed at least 25%. Even after extended compression, all bounce back to shape faster than other foams we offer.

These sheets and strips are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

Offering excellent resistance to corrosive environments, these Viton® fluoroelastomer foam sheets and strips stand up to a wide variety of chemicals, fuels, and oils.

Similar to a sponge, this open-cell foam absorbs and holds up to 30 times its weight in liquid.

The best sound absorbers of all our rigid sheets, use to quiet noisy areas in your facility. They're peaked on one side for more sound-absorbing area than flat sheets. Made of melamine, they have an acrylic resin finish that resists dust and dirt and wipes clean.