About Actuated On/Off Valves
More
Miniature Solenoid On/Off Valves
- For Use With: Air, Argon, Helium, Neon, Xenon, Krypton
- Seal Material: Fluoroelastomer Rubber
Less than half the size of our other compact valves, these have small pipe connections for miniature lines. They operate on electricity to automatically start and stop flow.
Valves are normally closed unless actuated. They don’t require a minimum pressure drop between the inlet and outlet for operation. Body is 303 stainless steel for good corrosion resistance. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Thread Size  | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Dia. | O'all Ht. | Each | |
303 Stainless Steel Body with Wire Leads | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Normally Closed—12V DC | ||||||||||
| 10-32 | Female | UNF | 0.013 | 100 psi @ 140° F | Zero Pressure Drop | 35° to 140° | 11/16" | 1 11/16" | 0000000 | 000000 |
| 10-32 | Female | UNF | 0.038 | 100 psi @ 140° F | Zero Pressure Drop | 35° to 140° | 11/16" | 1 11/16" | 0000000 | 00000 |
| 10-32 | Female | UNF | 0.07 | 30 psi @ 140° F | Zero Pressure Drop | 35° to 140° | 11/16" | 1 11/16" | 0000000 | 00000 |
Normally Closed—24V DC | ||||||||||
| 10-32 | Female | UNF | 0.013 | 100 psi @ 140° F | Zero Pressure Drop | 35° to 140° | 11/16" | 1 11/16" | 0000000 | 00000 |
| 10-32 | Female | UNF | 0.038 | 100 psi @ 140° F | Zero Pressure Drop | 35° to 140° | 11/16" | 1 11/16" | 0000000 | 00000 |
| 10-32 | Female | UNF | 0.07 | 30 psi @ 140° F | Zero Pressure Drop | 35° to 140° | 11/16" | 1 11/16" | 0000000 | 00000 |
Compact Solenoid On/Off Valves for Coolant
- For Use With: Ethylene Glycol
- Seal Material: Fluoroelastomer Rubber
- Specifications Met: See table
Reduce your pipeline footprint with these low-profile valves that are about half the size of standard valves for coolant. They operate on electricity to automatically start and stop flow.
Valves are normally closed unless actuated. They don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | No. of Mounting Holes | Mounting Hole Dia. | Fasteners Included | Each | |
Acetal Plastic Body with Wire Leads | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Normally Closed—24V DC | |||||||||||||
| 1/8 | Female | NPT | 0.09 | 100 psi @ 150° F | Zero Pressure Drop | 0° to 150° | 1 5/16" | 2 1/4" | 2 | 1/4" | No | 00000000 | 000000 |
| 1/8 | Female | NPT | 0.2 | 30 psi @ 150° F | Zero Pressure Drop | 0° to 150° | 1 5/16" | 2 1/4" | 2 | 1/4" | No | 00000000 | 00000 |
Normally Closed—120V AC | |||||||||||||
| 1/8 | Female | NPT | 0.09 | 300 psi @ 150° F | Zero Pressure Drop | 0° to 150° | 1 5/16" | 2 1/4" | 2 | 1/4" | No | 00000000 | 00000 |
| 1/8 | Female | NPT | 0.2 | 125 psi @ 150° F | Zero Pressure Drop | 0° to 150° | 1 5/16" | 2 1/4" | 2 | 1/4" | No | 00000000 | 00000 |
High-Use Solenoid On/Off Valves for Detergent
- For Use With: Soap Solutions
- Seal Material: PTFE Plastic
- Specifications Met: C-UL Listed, UL Listed
Sturdy internal components resist wear for a long service life in applications with frequent cycling. These valves operate on electricity to automatically start and stop flow.
All valves are normally closed unless actuated. They require a minimum pressure drop between the inlet and the outlet for operation; the upstream pressure must be greater than the downstream pressure. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | Each | |
Brass Body with Wire Leads | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Normally Closed—120V AC | ||||||||||
| 3/8 | Female | NPT | 2 | 150 psi @ 180° F | Pressure Drop Assisted | 35° to 200° | 2 1/16" | 3 3/4" | 0000000 | 0000000 |
| 1/2 | Female | NPT | 3 | 150 psi @ 180° F | Pressure Drop Assisted | 35° to 200° | 2 3/8" | 3 7/8" | 0000000 | 000000 |
| 3/4 | Female | NPT | 5 | 150 psi @ 180° F | Pressure Drop Assisted | 35° to 200° | 3" | 4 1/4" | 0000000 | 000000 |
| 1 | Female | NPT | 8 | 150 psi @ 180° F | Pressure Drop Assisted | 35° to 200° | 3 1/2" | 4 3/4" | 0000000 | 000000 |
Compact Threaded Solenoid Diverting Valves
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: Buna-N Rubber
Lower profile than other solenoid diverting valves and available in smaller pipe sizes, these are often used to automatically divert flow between ports in tight spots. They operate on electricity. All can direct flow from the side-port inlet to the side-port outlet or the top-port outlet. Valves cannot shut off flow. They don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is mounted directly to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Min. Pressure Drop Required | Max. Temp., °F | Actuation Time | Valve Lg. | O'all Ht. | Each | |
60V AC, 120V AC | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
430 Stainless Steel Body with Wire Leads | |||||||||||
NPT Female × NPT Female × NPT Female | |||||||||||
| 1/8 | L-Pattern | 0.17 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 11/16" | 0000000 | 0000000 |
| 1/4 | L-Pattern | 0.095 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 13/16" | 0000000 | 000000 |
| 1/4 | L-Pattern | 0.17 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 13/16" | 0000000 | 000000 |
24V DC | |||||||||||
430 Stainless Steel Body with Wire Leads | |||||||||||
NPT Female × NPT Female × NPT Female | |||||||||||
| 1/4 | L-Pattern | 0.095 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 13/16" | 0000000 | 000000 |
| 1/4 | L-Pattern | 0.17 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 13/16" | 0000000 | 000000 |
Compact Solenoid Flow-Adjustment Valves
- For Use With: Air, Argon, Helium, Krypton, Neon, Xenon
- Seal Material: Fluoroelastomer Rubber
Available in smaller pipe sizes than other solenoid flow-adjustment valves, these are often used with gas controllers and analytical instrumentation. They adjust and regulate flow based on the intensity of the electrical signal into the valve and are often integrated into PLC systems for automatic control over the valve position based on system conditions. They are normally closed unless actuated. Valves don’t require a pressure drop for operation. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Gender | Thread Type | Max. Pressure | Pressure Drop | Min. Pressure Drop Required | Temp. Range, °F | Input Signal Voltage | Valve Dia. | O'all Ht. | Each | |
Nickel-Plated Brass Body with Wire Leads | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Normally Closed—12V DC | |||||||||||
| 10-32 | Female | UNF | 100 psi @ 70° F | Zero Pressure Drop | None | 35° to 120° | 0V DC-10V DC | 7/8" | 1 9/16" | 0000000 | 000000 |
Normally Closed—24V DC | |||||||||||
| 10-32 | Female | UNF | 100 psi @ 70° F | Zero Pressure Drop | None | 35° to 120° | 0V DC-20V DC | 7/8" | 1 9/16" | 0000000 | 00000 |
Solenoid-Operated On/Off Screw-In Hydraulic Valves
Start and stop flow with an electronic signal. A spring returns the valve to its default position when the signal stops. Also known as cartridge valves, these compact valves screw into your mounting block.
For technical drawings and 3-D models, click on a part number.
Valves | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Body—UN/UNF (SAE Straight) | Repl. Solenoid Coils | |||||||||||
| Deltrol Equivalent Model No. | Hydraforce Equivalent Model No. | Parker Equivalent Model No. | Thread Size | Dash Size | Max. Flow Rate, gpm | Max. Pressure, psi | Voltage | O'all Ht. | Each | Each | ||
Single-Solenoid | ||||||||||||
| DSV2-080-2NCS-N-D1DE | SV08-24-0-N-12EL | DSL082-C-N-SP-D012-L | 3/4"-16 | 08 | 3 | 3,000 | 12V DC | 5 5/8" | 0000000 | 000000 | 0000000 | 000000 |
| DSV2-080-2NCS-N-D2DE | SV08-24-0-N-24EL | DSL082-C-N-SP-D012-L | 3/4"-16 | 08 | 3 | 3,000 | 24V DC | 5 5/8" | 0000000 | 00000 | 0000000 | 00000 |
| DSV2-080-2NOS-N-D1DE | SV08-25-0-N-12EL | DSL082-N-N-SP-D012-L | 3/4"-16 | 08 | 3 | 3,000 | 12V DC | 3 7/8" | 0000000 | 00000 | 0000000 | 00000 |
| DSV2-080-2NOS-N-D2DE | SV08-25-0-N-24EL | DSL082-N-N-SP-D012-L | 3/4"-16 | 08 | 3 | 3,000 | 24V DC | 3 7/8" | 0000000 | 00000 | 0000000 | 00000 |
| DSV2-100-2NCS-N-D1D | SV10-24-0-N-12DL | DSV102-C-N-D012-L | 7/8"-14 | 10 | 6 | 3,000 | 12V DC | 4 5/8" | 0000000 | 000000 | 0000000 | 00000 |
Directional-Control Screw-In Hydraulic Valves
Control the direction of flow or stop flow altogether with an electronic signal. These valves are also known as cartridge valves, and they screw into your mounting block.
Place three-way valves between the pressure source and a single-acting cylinder. Place four-way valves between the pressure source and a double-acting cylinder.
In NFPA diagrams, P represents the pressure source, T represents the tank, and A and B represent work ports.
For technical drawings and 3-D models, click on a part number.
Valves | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Body—UN/UNF (SAE Straight) | Replacement Solenoid Coils | |||||||||||
| Deltrol Equivalent Model No. | Hydraforce Equivalent Model No. | Parker Equivalent Model No. | Thread Size | Dash Size | Max. Flow Rate, gpm | Max. Pressure, psi | Voltage | O'all Ht. | Each | Each | ||
Style 1—Default Position: P Closed, A Open to T | ||||||||||||
| DSV2-080-3B-N-D1DE | SV08-30-0-N-12EL | DSL083-B-N-SP-D012-L | 3/4"-16 | 08 | 5 | 3,000 | 12V DC | 4 3/8" | 0000000 | 000000 | 0000000 | 000000 |
| DSV2-080-3B-N-D2DE | SV08-30-0-N-24EL | DSL083-B-N-SP-D024-L | 3/4"-16 | 08 | 5 | 3,000 | 24V DC | 4 3/8" | 0000000 | 00000 | 0000000 | 00000 |
Valves | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Body—UN/UNF (SAE Straight) | Replacement Solenoid Coils | |||||||||||
| Deltrol Equivalent Model No. | Hydraforce Equivalent Model No. | Parker Equivalent Model No. | Thread Size | Dash Size | Max. Flow Rate, gpm | Max. Pressure, psi | Voltage | O'all Ht. | Each | Each | ||
Style 2—Default Position: Closed | ||||||||||||
| DSV2-080-4NC-N-D2DE | SV08-41-0-N-24EL | DSL084-N-N-DP-D024-L | 3/4"-16 | 08 | 3 | 3,000 | 24V DC | 5" | 0000000 | 000000 | 0000000 | 000000 |
Style 3—Default Position: P Open to A, B Open to T | ||||||||||||
| DSV2-100-4CO-N-D1D | SV10-40-0-N-12DL | DSL104-B-N-D012-L | 7/8"-14 | 10 | 6 | 3,000 | 12V DC | 4 7/8" | 0000000 | 000000 | 0000000 | 00000 |
 Double-Solenoid Four-Way Valve |  4 |
 5 |
Valves | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Body—UN/UNF (SAE Straight) | Replacement Solenoid Coils | ||||||||||
| Deltrol Equivalent Model No. | Hydraforce Equivalent Model No. | Thread Size | Dash Size | Max. Flow Rate, gpm | Max. Pressure, psi | Voltage | O'all Ht. | Each | Each | ||
Style 4—Default Position: Closed | |||||||||||
| DSV-080-34C-N-D1DE | SV08-47C-0-N-12EL | 3/4"-16 | 08 | 3 | 3,000 | 12V DC | 5 1/2" | 0000000 | 0000000 | 0000000 | 000000 |
Style 5—Default Position: P Open to T, A and B Closed | |||||||||||
| DSV-080-34T-N-D1DE | SV08-47A-0-N-12EL | 3/4"-16 | 08 | 3 | 3,000 | 12V DC | 5 1/2" | 0000000 | 000000 | 0000000 | 00000 |
| DSV-080-34T-N-D2DE | SV08-47A-0-N-24EL | 3/4"-16 | 08 | 3 | 3,000 | 24V DC | 5 1/2" | 0000000 | 000000 | 0000000 | 00000 |