About half the height of our other versa-mount valves, these fit in tight spots. All have a compact, lightweight actuator and an angular body designed for installation in any mounting orientation. They operate on compressed air to automatically start and stop flow. You must control the air supply to the valve using either electricity or compressed air. You must control the air to the actuator using either an electric pilot valve (not included) or a manual on/off valve (not included). Valves don’t require a minimum pressure drop between the inlet and outlet for operation.

They have a single-acting actuator that only requires air pressure to open the valve; they automatically spring closed when the air turns off. All valves are normally closed unless actuated. The actuator is directly mounted to the valve body to minimize movement and reduce wear. Body is 316 stainless steel for excellent corrosion resistance.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.