The stepped end provides support and quick height adjustment when paired with a step block.

Eliminating the need for step blocks or other rear support, the pivoting rocker clamps workpieces of various thicknesses.

Good for occasional machining, economy kits contain lower-strength components than standard kits.

Use these blocks to support setup clamps. Fit the nonslip steps together for quick height adjustments.

Designed to provide more clearance above the nut than standard clamps, these have an offset shape. Also known as gooseneck clamps.

A plastic pad on the gripping surface of these clamps prevents workpiece marring, making them useful for holding polished surfaces and reducing the need for secondary finishing steps.

Unlike other setup clamps that grip the horizontal surface of a workpiece, these clamps have a pivoting ball in the tip to get a firm hold on angled parts.

Also known as toe clamps, these grip the side of a workpiece to leave the top free for machining.

Use these clamps to hold large round parts for machining. Each clamp comes with five lengths of chain that combine to accommodate different size workpieces.

Hold a workpiece securely from the side with minimal contact, leaving more of the workpiece free for machining.

Unlike the smooth and flat edges of standard fixture clamps, these clamps have ridges that bite into parts, making them good for gripping castings and rough-cut stock.

Machine these fixture clamps to match the contours of your workpiece for a stronger grip.

Machine these fixture clamps to match the contours of your workpieces for a stronger grip. Place the clamp between the two workpieces in a fixture and tighten the screw to extend the sides of the clamp, creating a secure hold against both workpieces.

These clamps wedge against the workpiece ID to grip cast, unfinished, or uneven parts, leaving the outside clear for machining.

Screw these clamps directly into a tapped hole in a fixture.

Mount these clamps to a bench top or other surface to keep workpieces in place.

Push the lever to lock the handle and prevent accidental opening.

Reduce the chance of getting pinched when unclamping. These clamps have more space between the handle and the arm than other low-profile toggle clamps.

Push the lever to lock the handle and prevent accidental opening.

Push the lever to lock the handle and prevent accidental opening.

Bolt to the side of an object. Often used to clamp lids and covers on containers.

Two sets of mounting holes allow mounting on the bottom or side.

The handle locks in a horizontal position for more clearance above the clamp.

These clamps have mounting holes on the bottom.

Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.

Mount the base to a work surface using screws.

The jaws move in unison to apply even pressure and prevent twisting.

Plastic clamping surfaces prevent damage to material.

With five times the capacity of standard C-clamps, these are the highest capacity clamps we offer.

These clamps have twice the capacity of standard C‐clamps.

Lighter weight than other metal clamps, these are less likely to bend thin material.

A bright finish makes these clamps easy to see.

Made entirely of fiberglass, these clamps won’t transmit electricity and are chemical resistant. They're often used around electrical equipment as well as in plating and anodizing applications.

With no handle or protruding screw, these clamps can fit into tight spaces.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side.

The handle can be rotated 125° for easier access or extra clearance above the clamp.

Moving parts are protected by a metal cover when the clamp is engaged to prevent dirt and dust from clogging the clamp.

Secure your workpiece from the side by fully extending the plunger, and push a lever to lock the handle in place.

Panel mount through a hole with the included nut, or drill and tap a hole to flush mount. A pushing or pulling motion holds workpieces from the side.

Drill a hole to mount these clamps through a surface and secure the mounting flange with screws. The plunger can be locked at any position along its travel.

When loosened, you can spin the body of this clamp around its mounting point for better access to the workpiece.

Combine fast-threading components to build a clamping assembly.