With a thickness that's precision ground to a tight tolerance, these bars are sometimes called flat stock.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Coated with an aluminum-silicon alloy, these sheets resist corrosion while withstanding long-term exposure to high temperatures. Use in drying ovens, furnaces, and smokestacks.

In addition to good corrosion resistance, the nickel coating provides better wear resistance than the zinc-galvanized coating.

These rods are precision ground and held to a strict straightness tolerance, so they're ready for turning in a lathe.

The matte plating on these rods increases corrosion resistance and wear resistance.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

These 90° angles are zinc galvanized for good corrosion resistance.

Coated with PVC for corrosion resistance, this carbon steel wire will stand up to outdoor use.

Also known as mild steel, use these low-carbon steel balls in parts that don't require high strength.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Made of rigid low-carbon steel, these I-beams are often used in construction, framing, lifting, and hoisting applications.

The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.

The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.

Precisely align, level, and adjust spacing on fasteners and shafts with these shims.

Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.

Be prepared with shims in a variety of thicknesses. These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.

The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Each set includes a variety of different thicknesses, so you can use multiple shims together to create a specific thickness or make minor adjustments.

Send us a drawing, and we'll cut your custom shim.

Use round shims to precisely align, level, and adjust spacing on shafts and machinery.

Mount the flange to a machine or wall to support idler sprockets and pulleys in tensioning applications. They include washers and a nut to position your component and hold it in place.

These shafts have keyways only on the ends, leaving a plain shaft in the center. Use the keyways with machine keys to transmit torque to gears, sprockets, and other keyed components. Use the middle of the shaft with bearings and other round-bore components.

A shoulder near the end of the shaft provides a stop for gears, sprockets, and bearings.

Eight times straighter than standard rotary shafts, these tight-tolerance shafts minimize vibrations and reduce wear to bearings and other components. They also have diameter tolerances that are twice as tight as standard rotary shafts.

Connect these internally threaded shafts directly to threaded components, or use a fastener to secure. They have a flat surface area that allows set screws to dig into the shaft for securely mounting gears, sprockets, and bearings.