We will reply to your message within an hour.
This wire rope provides a good balance of abrasion resistance and flexibility.
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.
Often used as bracing and guy wires, individual strands are thick solid wire for a stiff construction.
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.
This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.
This braided wire has a stiff construction for use as bracing and guy wires.
Use this wire rope when lifting in areas that are frequently washed down and require a rope that counteracts rotation.
These clamps must be oriented with the saddle on the long (live) end and the U-bolt on the short (dead) end. They’re also known as wire rope clips.
Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.
Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.
Kits include clamps and thimbles to support a wire rope loop and prevent it from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.
These compression sleeves are designed to meet lifting specifications.
These kits include two compression sleeves paired with two thimbles. The thimbles support the wire rope loops and prevent it from fraying.
Keep multiple sleeves on hand in a variety of sizes.
Also known as heavy-pattern thimbles, these can be used to reinforce the loop of a sling.
Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.
These thimbles are also known as thin pattern thimbles.
Also known as socket-end swage fittings, install these ball-with-shank-end fittings with a roller swage press for a strong, permanent hold.
Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.
Also known as socket-end swage fittings, install these stud-end fittings with a roller swage press for a strong, permanent hold.
Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.
Also known as open wedge sockets, these end fittings require only a torque wrench to install.
With a reinforced loop, also known as a thimble eye, installed on one end, quickly attach a hook or a shackle to a wire rope.
For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.
The galvanized finish resists corrosion.
This steel wire rope includes a hook with latch on one end for use with winches.
The swivel hook with latch installed on one end, prevents the wire rope from twisting. It is for use with winches.
A thimble on the inside of the loop protects the wire rope from fraying.
Made to meet stringent military standards, the fittings on these lanyards meet MS 20668 and MS 21259.
Made to meet stringent military standards, the fittings on these lanyards meet MS 20668.
Strike the prongs with a ball peen hammer and they expand to hold the connecting link together.
Smaller than lifting oblong links, these links provide room for snaps, carabiners, and other non-lifting connectors.
Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.
Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.
A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back to compensate for roll and sway when lifting heavy or unbalanced loads.
These rotate for easy positioning before a load is applied to minimize twisting and knotting of rope and chain.
Rotating for easy positioning before a load is applied, these minimize twisting and knotting of rope and chain.
These hooks meet MS-87006.