McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    40 Products

    Retaining Compounds for Close-Fitting Parts

    Image of Product. Front orientation. Retaining Compounds. Bottle.
    Image of Product. Front orientation. Retaining Compounds. Single-Use Capsule.

    Bottle

    Single-Use

    Capsule

    Fill gaps up to 0.01" to secure unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies. These retaining compounds begin to harden once coated surfaces are pressed together, blocking exposure to air.
    Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.
    Container
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Temp. Range,
    ° F
    Consistency
    Viscosity,
    cP
    Shear Strength,
    psi
    Color
    Specs.
    Met
    Mil. Spec.
    Food Industry
    Std.
    Each
    High Locking Strength
     
    Loctite® Retaining Compounds
    6090.02Single-Use Capsule0.006"1024-65 to 300Thin Liquid1202,290GreenASTM D5363MIL-R-46082—00000000000000
    6090.34Bottle0.006"1024-65 to 300Thin Liquid1202,290GreenASTM D5363MIL-R-46082—00000000000000
    6091.69Bottle0.006"1024-65 to 300Thin Liquid1202,290GreenASTM D5363MIL-R-46082—00000000000000
    6098.45Bottle0.006"1024-65 to 300Thin Liquid1202,290GreenASTM D5363MIL-R-46082—000000000000000
    6351.69Bottle0.01"6024-65 to 300Thick Liquid2,0002,900GreenASTM D5363MIL-R-46082—00000000000000
    6358.45Bottle0.01"6024-65 to 300Thick Liquid2,0002,900GreenASTM D5363MIL-R-46082—000000000000000
     
    Other Retaining Compounds
    —1.69Bottle0.005"1024-65 to 350Thin Liquid1252,000GreenASTM D5363MIL-R-46082 Type I—0000000000000
    —1.69Bottle0.006"2024-65 to 350Thin Liquid6003,000GreenASTM D5363MIL-R-46082 Type II—0000000000000
    —1.69Bottle0.01"6024-65 to 350Thick Liquid1,5003,000GreenASTM D5363MIL-R-46082 Type IIINSF/ANSI 61
    		0000000000000
     

    Adhesive Primers for Acrylic Adhesives, Retaining Compounds, and Threadlockers

    Image of Product. Front orientation. Adhesive Primers. Adhesive Primers for Acrylic Adhesives, Retaining Compounds, and Threadlockers, Aerosol Can.
    Image of Product. Front orientation. Adhesive Primers. Adhesive Primers for Acrylic Adhesives, Retaining Compounds, and Threadlockers, Can.
    Image of Product. Front orientation. Adhesive Primers. Adhesive Primers for Acrylic Adhesives, Retaining Compounds, and Threadlockers, Applicator-Top Bottle, Spray Bottle.

    Aerosol

    Can

    Can

    Applicator-Top

    Bottle, Spray

    Bottle

    To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these adhesive primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.
    Applicator-Top Bottle—Adhesive primers in applicator-top bottles also include a spray head for easy dispensing.
    Container
    Mfr. Model
    No.
    Size
    Net Wt.,
    oz.
    Type
    Drying Time,
    sec.
    Consistency
    Viscosity,
    cP
    Color
    Environment
    Each
    Loctite® Adhesive Primers
    7471—4.5Aerosol Can30Thin Liquid2Amber—00000000000000
    74711.75 fl. oz.—Applicator-Top Bottle, Spray Bottle30Thin Liquid2Amber—0000000000000
    74711 gal.—Can30Thin Liquid2Amber—00000000000000
    7649—0.88Aerosol Can30Thin Liquid2GreenFood and Beverage
    		000000000000
    7649—4.5Aerosol Can30Thin Liquid2GreenFood and Beverage
    		000000000000
    76491.75 fl. oz.—Applicator-Top Bottle, Spray Bottle30Thin Liquid2GreenFood and Beverage
    		000000000000
    76491 gal.—Can30Thin Liquid2GreenFood and Beverage
    		0000000000000
     

    Threadlockers

    Image of Product. Front orientation. Threadlockers. Threadlockers, Bottle.

    Bottle

    The most commonly used threadlockers, these liquids prevent loosening due to vibration, bending, or improper torque. You only need a few drops to evenly coat threads. As you twist parts together, exposure to air is blocked and the threadlocker begins to harden.
    Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes; and cadmium and zinc coatings.
    Low Locking Strength—Often used in setups that require frequent disassembly, these threadlockers are easily released with the turn of a screwdriver or L-key. They give fasteners additional hold to keep them secure against light shock and vibration.
    Medium Locking Strength—Strong enough for most applications, these threadlockers hold firmly until you break their bond with a combination or ratchet wrench.
    High Locking Strength—Keep fasteners firmly in place in motors, pumps, and other applications subjected to heavy shock and vibration. Breaking the bond of these threadlockers requires a propane torch, heat gun, or induction heater. As a result, they shouldn't be used in setups that you disassemble often.
    Thin Liquid—Seep into tight spaces better than thick liquids, so they're best for fine threads.
    Thick Liquid—Fill larger gaps than thin liquids, so they're best for coarse or worn threads.
    Military Specification—Mil. Spec. threadlockers are manufactured and tested to strict U.S. military standards.
    Container
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Color
    Breakaway Torque,
    in·lbf
    Temp. Range,
    ° F
    Consistency
    Viscosity,
    cP
    Mil. Spec.
    Reaches Full
    Strength, hr.
    Each
    Low Locking Strength
    1.69Bottle20Purple30-65 to 300Thick Liquid1,200MIL-S-46163 Grade M Type II2400000000000000
    1.69Bottle30Brown40-65 to 350Thin Liquid20MIL-S-22473 Grade H240000000000000
    1.69Bottle30Brown40-65 to 350Thin Liquid170MIL-S-22473 Grade HV240000000000000
    1.69Bottle30Purple65-65 to 350Thin Liquid20MIL-S-22473 Grade E240000000000000
    1.69Bottle30Purple65-65 to 350Thin Liquid170MIL-S-22473 Grade EV240000000000000
    1.69Bottle30Yellow15-65 to 350Thin Liquid170MIL-S-22473 Grade JV240000000000000
     
    Medium Locking Strength
    0.34Bottle30Blue100-65 to 300Thin Liquid120MIL-S-46163 Grade J Type I240000000000000
    1.69Bottle30Blue100-65 to 300Thin Liquid120MIL-S-46163 Grade J Type I240000000000000
    1.69Bottle30Blue125-65 to 350Thin Liquid20MIL-S-22473 Grade C240000000000000
    1.69Bottle30Blue125-65 to 350Thin Liquid170MIL-S-22473 Grade CV240000000000000
    1.69Bottle30Yellow110-65 to 350Thin Liquid150MIL-S-22473 Grade B240000000000000
    8.45Bottle30Blue100-65 to 300Thin Liquid120MIL-S-46163 Grade J Type I2400000000000000
     
    High Locking Strength
    0.34Bottle20Red200-65 to 300Thick Liquid3,550MIL-S-46163 Grade O Type II240000000000000
    0.34Bottle60Red250-65 to 300Thick Liquid7,000MIL-S-46163 Grade L Type I240000000000000
    1.69Bottle20Red200-65 to 300Thick Liquid3,550MIL-S-46163 Grade O Type II240000000000000
    1.69Bottle30Green185-65 to 350Thin Liquid20MIL-S-22473 Grade AA240000000000000
    1.69Bottle30Orange170-65 to 350Thin Liquid60MIL-S-22473 Grade D240000000000000
    1.69Bottle30Red185-65 to 350Thin Liquid20MIL-S-22473 Grade A240000000000000
    1.69Bottle30Red185-65 to 350Thin Liquid170MIL-S-22473 Grade AV240000000000000
    1.69Bottle60Red250-65 to 300Thick Liquid7,000MIL-S-46163 Grade L Type I240000000000000
    1.69Bottle60Red300-65 to 350Thin Liquid520MIL-S-46163 Grade K Type I240000000000000
    8.45Bottle20Red200-65 to 300Thick Liquid3,550MIL-S-46163 Grade O Type II2400000000000000
     

    Threadlockers for Drinking Water

    Image of Product. Front orientation. Threadlockers. Threadlockers for Drinking Water, Bottle.

    Bottle

    These threadlockers meet NSF/ANSI 61 for securing fasteners in drinking water systems. They begin to harden when you thread coated surfaces together, blocking exposure to air.
    Medium Locking Strength—Strong enough for most applications, these threadlockers hold firmly until you break their bond with a combination or ratchet wrench.
    NSF/ANSI 61—These threadlockers are certified for use in drinking water systems.
    Thick Liquid—Fill larger gaps than thin liquids, so they're best for coarse or worn threads.
    Military Specification—Mil. Spec. threadlockers are manufactured and tested to strict U.S. military standards.
    Container
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Color
    Breakaway Torque,
    in·lbf
    Food Industry
    Std.
    Temp. Range,
    ° F
    Consistency
    Viscosity,
    cP
    Mil. Spec.
    Reaches Full
    Strength, hr.
    Each
    Medium Locking Strength
    1.69Bottle10Blue150NSF/ANSI 61
    		-65 to 350Thick Liquid1,200MIL-S-46163 Grade N Type II2400000000000000
     

    Wicking Threadlockers

    Image of ProductInUse. Front orientation. Threadlockers. Wicking Threadlockers.
    Image of Product. Front orientation. Threadlockers. Wicking Threadlockers, Bottle.

    Bottle

    Secure fasteners that are already installed—these threadlockers are thin enough to flow into tiny gaps.
    High Locking Strength—Keep fasteners firmly in place in motors, pumps, and other applications subjected to heavy shock and vibration. Breaking the bond of these threadlockers requires a propane torch, heat gun, or induction heater. As a result, they shouldn't be used in setups that you disassemble often.
    Thin Liquid—Seep into tight spaces better than thick liquids, so they're best for fine threads.
    Military Specification—Mil. Spec. threadlockers are manufactured and tested to strict U.S. military standards.
    Container
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Color
    Breakaway Torque,
    in·lbf
    Temp. Range,
    ° F
    Consistency
    Viscosity,
    cP
    Mil. Spec.
    Reaches Full
    Strength, hr.
    Each
    High Locking Strength
    1.69Bottle10Green100-65 to 350Thin Liquid20MIL-S-46163 Grade R Type III2400000000000000
     
    back to top