Tighten these screws by turning them to the left; once fastened, they prevent counterclockwise-moving parts from loosening.

Cleaned and double bagged in an ISO Class 5 (Fed. Std. Class 100) clean room, these screws are ready to use on chambers and components in high-vacuum systems.

Often used to fasten parts in engines and turbines, these are our strongest stainless steel screws. They are comparable in strength to alloy steel with the corrosion resistance of 18-8 stainless steel.

Plastic screws are chemical and oil resistant, nonconductive, and lightweight.

Our most corrosion-resistant metal screws, titanium screws withstand salt water, acids, and chemicals. They have a high strength-to-weight ratio and are about 40% lighter than steel screws.

More corrosion resistant than stainless steel screws, nickel alloy screws have excellent resistance to salt water and some acids.

Nearly as strong as steel, these stainless steel screws won’t rust in outdoor, washdown, and other corrosive environments. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

Made from alloy steel, these screws are nearly twice as strong as stainless steel low-profile screws. With a head height one-third the size of a standard socket head, they fit in the tightest spaces.

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are nearly two and a half times stronger than stainless steel thread-locking screws. They have a thread locker to prevent loosening from vibration.

These general purpose flanged screws distribute pressure where the screw meets the surface, eliminating the need for a washer.

A rubber O-ring under the head of these screws prevents leaks and seals out contaminants.

Fasten these screws inside a high-vacuum system without bringing in contaminants.

A freely rotating washer distributes pressure over a wider area than a flange, preventing damage to your material's surface.

316 stainless steel screws resist corrosion from chemicals and salt water better than 18-8 stainless steel screws. They may be mildly magnetic.

These metric alloy steel screws are nearly twice as strong as stainless steel button head screws.

As strong as alloy steel and about 40% lighter, these metric titanium screws are known for their high strength-to-weight ratio. They stand up to salt water, acids, and chemicals.

The Torx or Torx-Plus drive on these metric screws have more points of contact than other drives, allowing you to tighten them without damaging the recess.

Add a decorative look when fastening parts—these metric screws have a painted head.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. Torx drives have more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

Made from 18-8 stainless steel, these metric screws have good chemical resistance and may be mildly magnetic. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer.

Made from aluminum, these metric screws are lightweight and resist corrosion in wet environments. The flange is wider and thicker than our other flanged screws, so they distribute pressure the best.

With a flange comparable in size to a washer, these metric screws distribute pressure better than standard flanged screws. Made from 316 stainless steel, they have excellent resistance to chemicals and salt water. Screws may be mildly magnetic.

To prevent unwanted removal, these metric screws have a tamper-resistant Torx drive—also known as a pin-in Torx drive—that makes them difficult to unscrew without special tools. An O-ring under the head blocks leaks and seals out dust and dirt.

Made from 18-8 stainless steel, these metric button head screws have good chemical resistance and may be mildly magnetic. The tamper-resistant hex drive (also known as a pin-in hex drive) makes them difficult to remove without special tools.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

Closely spaced threads on these screws fit in holes with a fine pitch. They're not compatible with standard metric threads.

These metric screws are twice as strong as standard steel Torx flat head screws.

These metric A286 stainless steel screws have comparable strength to alloy steel with the corrosion resistance of 18-8 stainless steel.

With an O-ring under the head, these metric screws seal out leaks and contaminants while also preventing unwanted removal.

To vent fluids and gases trapped under the screw, these metric screws are drilled through the shaft.

These assortments include button head screws.

Keep a convenient selection of knobs on hand. To build a custom knob or thumb screw, pair one of these knobs with a socket head screw. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.