About Nuts, Materials, and Finishes
More
Push-On External Retaining Rings
No groove required—press these rings onto the end of a shaft. Use them on unhardened shafts that are softer than the push ring. The ring bites into the metal to form an interference grip. Styles A, B, and C have teeth that dig into the shaft material, so expect minor scratching. Use a push nut installation tool (sold separately) to install rings, or install them manually.
1050 spring steel and 1060-1090 spring steel rings are an economical choice with good strength. A black finish is the result of a heat treatment to darken them—making them ideal for blending into dark backgrounds. However, these rings will rust if exposed to moisture. Black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, a zinc yellow-chromate plated finish has some corrosion resistance, and a zinc chromate plated finish has good corrosion resistance.
15-7 PH stainless steel rings have high strength with good corrosion resistance. Rings are passivated for added protection against corrosion.
For technical drawings and 3-D models, click on a part number.
Ring | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For OD, mm | OD, mm | Thick., mm | Ht., mm | Min. Installation Dp., mm | Passivation | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
Black-Phosphate 1060-1090 Spring Steel | |||||||||||
| A | 3 | 8 | 0.25 | __ | 1.5 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| A | 4 | 9 | 0.25 | __ | 2 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| A | 5 | 10 | 0.25 | __ | 2 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| A | 6 | 11 | 0.25 | __ | 2.5 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| A | 7 | 12 | 0.25 | __ | 2.5 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| A | 8 | 13 | 0.25 | __ | 2.5 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| A | 9 | 14 | 0.3 | __ | 2.5 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| A | 10 | 16 | 0.3 | __ | 3 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| A | 12 | 18 | 0.3 | __ | 3 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| A | 14 | 20.5 | 0.3 | __ | 3 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| A | 15 | 23 | 0.5 | __ | 3 | __ | Rockwell C45 | Magnetic | 25 | 000000000 | 0000 |
| A | 16 | 24.5 | 0.4 | __ | 3 | __ | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| A | 17 | 26 | 0.5 | __ | 3.5 | __ | Rockwell C45 | Magnetic | 25 | 000000000 | 0000 |
| A | 18 | 27 | 0.4 | __ | 3.5 | __ | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| A | 20 | 29 | 0.5 | __ | 3.5 | __ | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| A | 22 | 31 | 0.5 | __ | 3.5 | __ | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| A | 25 | 34 | 0.5 | __ | 4 | __ | Rockwell C45 | Magnetic | 25 | 000000000 | 00000 |
Black-Phosphate 1050 Spring Steel | |||||||||||
| B | 4 | 11.1 | __ | 1.5 | 6.5 | __ | Rockwell C38 | Magnetic | 100 | 000000000 | 00000 |
| B | 5 | 11.1 | __ | 1.5 | 6.5 | __ | Rockwell C38 | Magnetic | 100 | 000000000 | 00000 |
Zinc-Chromate-Plated 1060-1090 Spring Steel | |||||||||||
| A | 3 | 8 | 0.25 | __ | 1.5 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| A | 4 | 9 | 0.25 | __ | 2 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| A | 5 | 10 | 0.25 | __ | 2 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| A | 6 | 11 | 0.25 | __ | 2.5 | __ | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| A | 7 | 12 | 0.25 | __ | 2.5 | __ | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| A | 10 | 16 | 0.3 | __ | 3 | __ | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| A | 12 | 18 | 0.3 | __ | 3 | __ | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| A | 16 | 24.5 | 0.4 | __ | 3 | __ | Rockwell C45 | Magnetic | 10 | 000000000 | 0000 |
| A | 20 | 29 | 0.5 | __ | 3.5 | __ | Rockwell C45 | Magnetic | 10 | 000000000 | 00000 |
| A | 22 | 31 | 0.5 | __ | 3.5 | __ | Rockwell C45 | Magnetic | 10 | 000000000 | 00000 |
Zinc-Plated 1050 Spring Steel | |||||||||||
| B | 6 | 13.5 | __ | 1.8 | 6.5 | __ | Rockwell C38 | Magnetic | 100 | 000000000 | 00000 |
Black Oxide 1060-1090 Spring Steel | |||||||||||
| C | 1.5 | 5 | __ | 1.3 | 1.5 | __ | Rockwell C47 | Magnetic | 100 | 000000000 | 00000 |
| C | 2 | 7 | __ | 1.7 | 2 | __ | Rockwell C47 | Magnetic | 200 | 000000000 | 00000 |
| C | 3 | 10.5 | __ | 2.2 | 2.5 | __ | Rockwell C47 | Magnetic | 100 | 000000000 | 00000 |
| C | 3.5 | 11 | __ | 2.2 | 2.5 | __ | Rockwell C47 | Magnetic | 100 | 000000000 | 00000 |
| C | 4 | 12 | __ | 2.2 | 2.5 | __ | Rockwell C47 | Magnetic | 100 | 000000000 | 00000 |
| C | 5 | 14 | __ | 2.5 | 3 | __ | Rockwell C47 | Magnetic | 100 | 000000000 | 00000 |
| C | 6 | 16 | __ | 3 | 3.5 | __ | Rockwell C47 | Magnetic | 100 | 000000000 | 00000 |
| C | 7 | 17 | __ | 3 | 3.5 | __ | Rockwell C47 | Magnetic | 100 | 000000000 | 00000 |
| C | 8 | 18 | __ | 3 | 3.5 | __ | Rockwell C47 | Magnetic | 100 | 000000000 | 00000 |
| C | 10 | 20 | __ | 3 | 3.5 | __ | Rockwell C47 | Magnetic | 25 | 000000000 | 0000 |
Black Oxide 1050 Spring Steel | |||||||||||
| C | 1 | 4 | __ | 1.3 | 1.5 | __ | Rockwell C47 | Magnetic | 50 | 000000000 | 0000 |
| C | 2.5 | 8.5 | __ | 1.7 | 2 | __ | Rockwell C47 | Magnetic | 50 | 000000000 | 0000 |
| C | 4.5 | 13 | __ | 2.5 | 3 | __ | Rockwell C47 | Magnetic | 50 | 000000000 | 0000 |
| C | 5.5 | 14 | __ | 2.5 | 3 | __ | Rockwell C47 | Magnetic | 25 | 000000000 | 0000 |
15-7 PH Stainless Steel  | |||||||||||
| A | 3 | 8 | 0.25 | __ | 1.5 | Passivated | Rockwell C44 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| A | 5 | 10 | 0.25 | __ | 2 | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| A | 6 | 11 | 0.25 | __ | 2.5 | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| A | 9 | 14 | 0.3 | __ | 2.5 | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| A | 10 | 16 | 0.3 | __ | 3 | Passivated | Rockwell C44 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
Side-Mount External Retaining Rings
Also known as E-style rings, these rings have three prongs that make contact with the shaft and provide a wider shoulder than other external rings for a larger retaining surface. Use a side-mount retaining ring tool (sold separately) to push them into the groove from the side of the shaft. Ring OD is measured with the ring uninstalled.
1060-1090 spring steel and spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. DIN 1.4122 stainless steel rings withstand wear caused by abrasion, similar to 400 series stainless steel. Rings are passivated for added protection against corrosion.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
For technical drawings and 3-D models, click on a part number.
For Groove | Ring | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For OD, mm | Dia., mm | Wd., mm | OD, mm | Thick., mm | Min. Hardness | Thrust Load Capacity, lbs. | Magnetic Properties | Specifications Met | Pkg. Qty. | Pkg. | |
Black-Phosphate 1060-1090 Spring Steel | |||||||||||
| 3-4 | 2.3 | 0.64 | 5.9 | 0.6 | Rockwell C46 | 110 | Magnetic | DIN 6799 | 100 | 000000000 | 00000 |
| 4-5 | 3.2 | 0.64 | 6.9 | 0.6 | Rockwell C46 | 140 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
| 5-7 | 4 | 0.74 | 8.85 | 0.7 | Rockwell C46 | 210 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
| 6-8 | 5 | 0.74 | 10.85 | 0.7 | Rockwell C46 | 250 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
| 7-9 | 6 | 0.74 | 11.8 | 0.7 | Rockwell C46 | 300 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
| 8-11 | 7 | 0.94 | 13.8 | 0.9 | Rockwell C46 | 400 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
| 9-12 | 8 | 1.05 | 15.75 | 1 | Rockwell C46 | 560 | Magnetic | DIN 6799 | 100 | 000000000 | 00000 |
| 10-14 | 9 | 1.15 | 18.2 | 1.1 | Rockwell C46 | 670 | Magnetic | DIN 6799 | 100 | 000000000 | 00000 |
| 11-15 | 10 | 1.25 | 19.7 | 1.2 | Rockwell C46 | 780 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
| 13-18 | 12 | 1.35 | 22.7 | 1.3 | Rockwell C46 | 1,050 | Magnetic | DIN 6799 | 50 | 000000000 | 00000 |
| 16-24 | 15 | 1.55 | 28.7 | 1.5 | Rockwell C46 | 1,750 | Magnetic | DIN 6799 | 25 | 000000000 | 00000 |
| 20-31 | 19 | 1.8 | 36.5 | 1.75 | Rockwell C46 | 2,470 | Magnetic | DIN 6799 | 10 | 000000000 | 0000 |
| 25-38 | 24 | 2.05 | 43.5 | 2 | Rockwell C46 | 3,370 | Magnetic | DIN 6799 | 10 | 000000000 | 00000 |
| 32-42 | 30 | 2.55 | 51.3 | 2.5 | Rockwell C46 | 5,170 | Magnetic | DIN 6799 | 5 | 000000000 | 0000 |
Black-Phosphate Spring Steel | |||||||||||
| 1-1.4 | 0.8 | 0.24 | 1.95 | 0.2 | Rockwell C46 | 10 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
| 1.4-2 | 1.2 | 0.34 | 2.9 | 0.3 | Rockwell C46 | 20 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
| 2-2.5 | 1.5 | 0.44 | 3.9 | 0.4 | Rockwell C46 | 40 | Magnetic | DIN 6799 | 100 | 000000000 | 00000 |
| 2.5-3 | 1.9 | 0.54 | 4.4 | 0.5 | Rockwell C46 | 70 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
DIN 1.4122 Stainless Steel | |||||||||||
| 1.4-2 | 1.2 | 0.34 | 2.9 | 0.3 | Not Rated | 20 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
| 2-2.5 | 1.5 | 0.44 | 3.9 | 0.4 | Not Rated | 40 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
| 2.5-3 | 1.9 | 0.54 | 4.4 | 0.5 | Not Rated | 70 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
| 3-4 | 2.3 | 0.64 | 5.9 | 0.6 | Rockwell C44 | 110 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
| 4-5 | 3.2 | 0.64 | 6.9 | 0.6 | Rockwell C44 | 140 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
| 5-7 | 4 | 0.74 | 8.85 | 0.7 | Rockwell C44 | 210 | Magnetic | DIN 6799 | 50 | 000000000 | 00000 |
| 6-8 | 5 | 0.74 | 10.85 | 0.7 | Rockwell C44 | 250 | Magnetic | DIN 6799 | 50 | 000000000 | 00000 |
| 7-9 | 6 | 0.74 | 11.8 | 0.7 | Rockwell C44 | 300 | Magnetic | DIN 6799 | 25 | 000000000 | 0000 |
| 8-11 | 7 | 0.94 | 13.8 | 0.9 | Rockwell C44 | 400 | Magnetic | DIN 6799 | 25 | 000000000 | 00000 |
| 9-12 | 8 | 1.05 | 15.75 | 1 | Rockwell C44 | 560 | Magnetic | DIN 6799 | 10 | 000000000 | 0000 |
| 10-14 | 9 | 1.15 | 18.2 | 1.1 | Rockwell C44 | 670 | Magnetic | DIN 6799 | 10 | 000000000 | 0000 |
| 11-15 | 10 | 1.25 | 19.7 | 1.2 | Rockwell C44 | 780 | Magnetic | DIN 6799 | 5 | 000000000 | 0000 |
| 13-18 | 12 | 1.35 | 22.7 | 1.3 | Rockwell C44 | 1,050 | Magnetic | DIN 6799 | 5 | 000000000 | 0000 |
| 16-24 | 15 | 1.55 | 28.7 | 1.5 | Rockwell C44 | 1,750 | Magnetic | DIN 6799 | 1 | 000000000 | 0000 |
Push-On Internal Retaining Rings
No groove required—these rings have teeth that firmly grip the bore. Use them in unhardened shafts that are softer than the push ring. The metal must be soft enough for the ring to form an interference grip. Not recommended for use with nickel-, chrome-, or nitride-coated shafts.
1060-1090 spring steel rings are an economical choice with good strength. The black-phosphate finish is mildly corrosion resistant in dry environments.
For technical drawings and 3-D models, click on a part number.
Ring | ||||||||
|---|---|---|---|---|---|---|---|---|
| For ID, mm | ID, mm | Thick., mm | Min. Installation Dp., mm | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
Black-Phosphate 1060-1090 Spring Steel | ||||||||
| 8 | 4 | 0.25 | 2 | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| 10 | 5 | 0.25 | 2 | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| 12 | 6 | 0.25 | 2.5 | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| 14 | 8 | 0.3 | 2.5 | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| 15 | 9 | 0.3 | 2.5 | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| 16 | 10 | 0.3 | 2.5 | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| 17 | 11 | 0.3 | 3 | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| 18 | 10.5 | 0.4 | 3 | Rockwell C45 | Magnetic | 50 | 000000000 | 0000 |
| 20 | 11 | 0.4 | 3.5 | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| 22 | 13 | 0.5 | 3.5 | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| 24 | 15 | 0.5 | 3.5 | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| 25 | 16 | 0.5 | 3.5 | Rockwell C45 | Magnetic | 25 | 000000000 | 0000 |
| 26 | 17 | 0.5 | 3.5 | Rockwell C45 | Magnetic | 25 | 000000000 | 00000 |
| 30 | 21 | 0.5 | 4 | Rockwell C45 | Magnetic | 25 | 000000000 | 00000 |
| 35 | 25 | 0.5 | 4 | Rockwell C45 | Magnetic | 10 | 000000000 | 0000 |
| 40 | 30 | 0.5 | 4 | Rockwell C45 | Magnetic | 10 | 000000000 | 0000 |
| 50 | 39 | 0.5 | 4 | Rockwell C45 | Magnetic | 10 | 000000000 | 0000 |
Internal Teeth Retaining Rings
With teeth along the inside, these retaining rings hold chamfered shafts inside the housing of your equipment. That’s why they’re commonly used to retain shafts in roller drum systems and other heavy duty equipment. Made from spring steel, squeeze them into or remove them from the groove with retaining ring pliers. These rings have a black-phosphate finish that won’t corrode in dry environments. All meet DIN 984, an international standard for retaining ring specifications.
Ring OD is measured with the ring uninstalled.
For technical drawings and 3-D models, click on a part number.
For Groove | Ring | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For ID, mm | Dia., mm | Wd., mm | OD, mm | Thick., mm | Number of Teeth | Min. Hardness | Thrust Load Capacity, lbs. | Magnetic Properties | Specifications Met | Pkg. Qty. | Pkg. | |
Black-Phosphate 1060-1090 Spring Steel | ||||||||||||
| 16 | 16.8 | 1.1 | 17.3 | 1 | 6 | Rockwell C47 | 1,230 | Magnetic | DIN 984 | 25 | 000000000 | 00000 |
| 18 | 19 | 1.1 | 19.5 | 1 | 6 | Rockwell C47 | 1,460 | Magnetic | DIN 984 | 25 | 000000000 | 0000 |
| 24 | 25.2 | 1.3 | 25.9 | 1.2 | 6 | Rockwell C47 | 3,120 | Magnetic | DIN 984 | 25 | 000000000 | 0000 |
| 26 | 27.2 | 1.3 | 28.5 | 1.2 | 6 | Rockwell C47 | 3,100 | Magnetic | DIN 984 | 25 | 000000000 | 0000 |
| 28 | 29.4 | 1.3 | 30.1 | 1.2 | 6 | Rockwell C47 | 2,980 | Magnetic | DIN 984 | 25 | 000000000 | 0000 |
| 30 | 31.4 | 1.3 | 32.1 | 1.2 | 6 | Rockwell C47 | 3,070 | Magnetic | DIN 984 | 25 | 000000000 | 00000 |
| 32 | 33.7 | 1.3 | 34.4 | 1.2 | 6 | Rockwell C47 | 3,100 | Magnetic | DIN 984 | 25 | 000000000 | 00000 |
| 35 | 37 | 1.6 | 37.8 | 1.5 | 6 | Rockwell C47 | 6,040 | Magnetic | DIN 984 | 25 | 000000000 | 00000 |
| 36 | 38 | 1.6 | 38.8 | 1.5 | 6 | Rockwell C47 | 5,930 | Magnetic | DIN 984 | 10 | 000000000 | 0000 |
| 40 | 42.5 | 1.85 | 43.5 | 1.75 | 6 | Rockwell C47 | 10,020 | Magnetic | DIN 984 | 10 | 000000000 | 00000 |
| 44 | 46.5 | 1.85 | 47.5 | 1.75 | 6 | Rockwell C47 | 9,730 | Magnetic | DIN 984 | 10 | 000000000 | 00000 |
| 45 | 47.5 | 1.85 | 48.5 | 1.75 | 6 | Rockwell C47 | 9,680 | Magnetic | DIN 984 | 10 | 000000000 | 00000 |
| 50 | 53 | 2.15 | 54.2 | 2 | 6 | Rockwell C44 | 13,660 | Magnetic | DIN 984 | 1 | 000000000 | 0000 |
| 52 | 55 | 2.15 | 56.2 | 2 | 6 | Rockwell C44 | 13,530 | Magnetic | DIN 984 | 10 | 000000000 | 00000 |
| 54 | 57 | 2.15 | 58.2 | 2 | 4 | Rockwell C44 | 13,530 | Magnetic | DIN 984 | 10 | 000000000 | 00000 |
| 55 | 58 | 2.15 | 59.2 | 2 | 6 | Rockwell C44 | 13,550 | Magnetic | DIN 984 | 10 | 000000000 | 00000 |
| 57 | 60 | 2.15 | 61.2 | 2 | 6 | Rockwell C44 | 13,660 | Magnetic | DIN 984 | 5 | 000000000 | 0000 |
| 62 | 65 | 2.15 | 66.2 | 2 | 8 | Rockwell C44 | 13,690 | Magnetic | DIN 984 | 5 | 000000000 | 0000 |
| 65 | 68 | 2.65 | 69.2 | 2.5 | 8 | Rockwell C44 | 27,200 | Magnetic | DIN 984 | 5 | 000000000 | 00000 |
| 72 | 75 | 2.65 | 76.5 | 2.5 | 8 | Rockwell C44 | 26,750 | Magnetic | DIN 984 | 1 | 000000000 | 0000 |
| 80 | 83.5 | 2.65 | 85.5 | 2.5 | 8 | Rockwell C44 | 26,970 | Magnetic | DIN 984 | 5 | 000000000 | 00000 |
| 90 | 93.5 | 3.15 | 95.5 | 3 | 8 | Rockwell C44 | 44,730 | Magnetic | DIN 984 | 1 | 000000000 | 00000 |
Round Push Nuts
With flexible teeth that slide smoothly over threads of any pitch, these push nuts can be used as a standalone nut for light-duty applications or as a jam nut to keep hex nuts and bolts securely fastened. All nuts have a finish that protects the steel from corrosion in wet environments.
Nuts finished with black phosphate have a dark surface color.
Installation tools (sold separately) save you time when you’re installing nuts back-to-back. They have a magnetized tip, so nuts won’t fall off while you’re sliding them on.
For technical drawings and 3-D models, click on a part number.
Push Nuts | Installation Tools | ||||||
|---|---|---|---|---|---|---|---|
| For Screw Size | OD | Ht. | Pkg. Qty. | Pkg. | Each | ||
Zinc-Plated Steel | |||||||
| M5 | 11mm | 1.7mm | 100 | 000000000 | 00000 | 000000000 | 000000 |
| M6 | 13mm | 1.9mm | 100 | 000000000 | 0000 | 000000000 | 00000 |
| M6 | 17mm | 2mm | 100 | 000000000 | 0000 | 000000000 | 00000 |
| M8 | 16mm | 2mm | 100 | 000000000 | 0000 | 000000000 | 00000 |
| M10 | 24mm | 2.6mm | 50 | 000000000 | 0000 | 000000000 | 00000 |
| M12 | 21mm | 3.2mm | 50 | 000000000 | 0000 | 000000000 | 00000 |
Black-Phosphate Steel | |||||||
| M10 | 20mm | 2.3mm | 50 | 000000000 | 0000 | 000000000 | 00000 |
| M12 | 21mm | 3.2mm | 50 | 000000000 | 0000 | 000000000 | 00000 |
| M14 | 25mm | 3.2mm | 50 | 000000000 | 0000 | 000000 | 00 |
Installation Tools for Press-Fit Nuts
Use these tools to install press-fit nuts by hand. They include one hand tool, seven hole punches and dies, five fastener anvils, one flat punch, one punch adapter bushing, and one edge-depth guide.
| For Thread Size | Max. Force, lbs. | Wt., lbs. | Each | |
Metric | ||||
|---|---|---|---|---|
| M2, M2.5, M3, M3.5, M4, M5 | 2,500 | 2.75 | 000000000 | 0000000 |
Side-Mount External Retaining Ring Assortments
Also known as E-Style and C-style rings, slide these into the groove from the side of the shaft. They provide a wider shoulder than other external retaining rings for a larger retaining surface. All are magnetic.
Black-phosphate steel retaining rings resist corrosion in dry environments.
| Number of Pieces | Sizes Included | Retaining Ring Style | Container Type | Specifications Met | Each | |
Metric | ||||||
|---|---|---|---|---|---|---|
Black-Phosphate Steel | ||||||
| 300 | For 3 mm to 20 mm OD | E | Plastic Box | DIN 6799 | 000000000 | 000000 |
Push Nut Installation Tools
Push nuts and retaining rings over threaded fasteners and shafts. These tools have a magnetized tip so nuts don't fall off as you slide them on.
For technical drawings and 3-D models, click on a part number.
Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Screw Size | Bolt Clearance | Overall Lg. | Lg. | O'all Wd. | Material | Handle Material | Fastener-Holding Mechanism | Each | |
| 5/64", 2 mm | No. 0, M2 | 13/16" | 3 1/2" | 2 1/4" | 1/4" | Steel | Plastic | Magnet | 000000000 | 000000 |
| 3/32", 2.5 mm | No. 2, M2.5 | 1 1/8" | 3 1/2" | 2 1/4" | 1/4" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 1/8", 3 mm | No. 4, M3, M3.5 | 1 1/2" | 3 1/2" | 2 1/4" | 5/16" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 5/32", 4 mm | No. 6, M4 | 2 1/2" | 3 1/2" | 2 1/4" | 7/16" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 3/16", 4.5 mm | No. 8 | 2 1/2" | 3 1/2" | 2 1/4" | 1/2" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 7/32", 5 mm | No. 10, M5 | 2 1/2" | 3 1/2" | 2 1/4" | 1/2" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 15/64", 6 mm | No. 12, M6 | 2 1/2" | 3 1/2" | 2 1/4" | 1/2" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 1/4", 7 mm | 1/4" | 3" | 4" | 2 3/4" | 9/16" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 5/16", 8 mm | 5/16", M8 | 3" | 4" | 2 3/4" | 11/16" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 3/8", 10 mm | 3/8", M10 | 3" | 5" | 3 3/4" | 7/8" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 7/16", 11 mm | 7/16" | 3" | 5" | 3 3/4" | 15/16" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 1/2", 12 mm, 13 mm | 1/2", M12 | 3" | 5" | 3 3/4" | 1" | Steel | Plastic | Magnet | 000000000 | 00000 |