Filter by
DFARS Compliance
About Aluminum
More
Multipurpose 6061 Aluminum Hex Tubes
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: T6
- Fabrication: Extruded
- Specifications Met: ASTM B221
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Wd. Tolerance | Inside Wd. | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Wall Thick. (-0.013" to 0.013" Tolerance) | |||||||||
| 1/2" | -0.016" to 0.016" | 1/4" | Hardened | -320° to 300° | 0.0125" per ft. | 0000000 | |||
| 5/8" | -0.018" to 0.018" | 3/8" | Hardened | -320° to 300° | 0.0125" per ft. | 0000000 | |||
| 3/4" | -0.02" to 0.02" | 1/2" | Hardened | -320° to 300° | 0.0125" per ft. | 0000000 | |||
| 1" | -0.023" to 0.023" | 3/4" | Hardened | -320° to 300° | 0.0125" per ft. | 0000000 | |||
| 1 1/4" | -0.026" to 0.026" | 1" | Hardened | -320° to 300° | 0.0125" per ft. | 0000000 | |||
| 1 1/2" | -0.031" to 0.031" | 1 1/4" | Hardened | -320° to 300° | 0.0125" per ft. | 0000000 | |||
1/4" Wall Thick. (-0.025" to 0.025" Tolerance) | |||||||||
| 1" | -0.023" to 0.023" | 1/2" | Hardened | -320° to 300° | 0.0125" per ft. | 0000000 | |||
| 1 1/2" | -0.031" to 0.031" | 1" | Hardened | -320° to 300° | 0.0125" per ft. | 0000000 | |||
Ultra-Formable 260 Brass Hex Tubes
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: H02 (1/2 Hard) to H03 (3/4 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B135
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
For technical drawings and 3-D models, click on a part number.