We will reply to your message within an hour.
Also known as diagonal-cutting pliers.
Choose these wire cutters for your occasional use.
Get more power with less effort—these wire cutters are specially designed to increase leverage compared to standard wire cutters.
Reach deep into crowded access panels and other tight spaces without the handles getting in the way.
For use where even minor magnetism can cause major damage, these wire cutters are made of titanium, so they’re completely nonmagnetic.
Snip wire in tight spaces, such as crowded circuit boards, without damaging components nearby.
Cut through nickel, spring steel, and other tough wires often found in the electronics and aerospace industry.
Capture scraps, such as cut cable ties and wire ends, to prevent them from falling into your equipment or flying and hitting something.
An angled head makes it easy to cut wire where standard cutters won’t fit.
These cutters are stainless steel, which provides excellent corrosion resistance.
Cut steel, spring steel, and other hard wire without worrying about your wire cutters rusting.
Spot these cutters easily—colored grips make them stand out, so you don’t lose them.
The black finish prevents glare that can interfere with precision work under bright light and magnification.
These sets include four cutters, each with a different head shape.
The grips on these cutters drain static from your application, preventing buildup from electrostatic discharge (ESD).
These tools divert static electricity faster than our other static-control wire cutters.
The specially designed internal spring provides constant, uniform tension for superior performance.
Tungsten carbide cutting edges are bonded to the jaws for long life.
Make cuts easily and comfortably while protecting sensitive equipment from static discharge.
Slice through nickel, titanium, and other hard wire without building up electrostatic discharge (ESD) or rusting out your tool.
Good for high-volume cutting and trimming.
Made of aluminum-bronze that is Factory Mutual approved, these cutters inhibit sparking and are nonmagnetic and corrosion resistant.
These cutters have insulated grips to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.
Cut cleanly through the thin optical fibers found in fiber optic cable, including those protected by Kevlar, without building up electrostatic discharge (ESD).
A double hinge provides high cutting force with low gripping pressure.
Plastic-cushioned grips make these cutters easy to hold during repeated cuts.
Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.
Cut hard steel wire, nails, and small rivets close to the surface with the wide, flat jaws on these cutters.
The carbide-tipped steel jaws stay sharp longer than standard steel jaws. You can sharpen them as they wear. These cutters have a double hinge that provides high cutting force with low gripping pressure.
Also known as nippers, these cutters have wide, flat jaws that cut steel wire and bolts close to the surface.
Make accurate, flush cuts through small wire with these tweezer-style cutters.
Made of stainless steel, these cutters won’t rust even when stored in damp environments. The grips drain static away from the blades to prevent damage to sensitive equipment from electrostatic discharge (ESD).
Snip wire close against circuit boards and other electronic components without building up electrostatic discharge (ESD).
Shaped like tweezers, these cutters make accurate, flush cuts in small wire without damaging the surface underneath. The grips drain static away from the tips, protecting sensitive components from electrostatic discharge (ESD).
These powerful cutters make diagonal cuts with a nipping action to cut extra-hard wire with ease.
Cut thin, hard wire with these small cutters.
Minimize material distortion while cutting steel and stainless steel wire rope.
Cutters have double hinge that provides high cutting force with low gripping pressure.
Keep your hands in a comfortable position so you can apply more force for cutting.
A small grip enables one-handed cutting.
Make one-handed cuts with these small cutters.
Handle is angled 30° to keep work in sight and hands clear of the work surface. Blades are flat on one side for close-to-the-surface cuts.
Keep a variety of small cutters on hand for cuts in tight spaces.
Cut medium steel chain and hard steel bolts, rods, screws, rivets, nails, bars, wire, and rebar.
Leverage points on the jaws and handles let you cut through bolts, chains, and rods with 30% less effort than standard bolt cutters.
The cutting head is angled 30° from the handles, so you can cut close to a surface or in a tight space without the handles getting in your way.
A double hinge provides high cutting force with low gripping pressure. These cutters are also known as aviation snips.
Keep your hand away from the material being cut.
Blades are high-speed steel so they stay sharp longer than steel blades, and they can be sharpened.
The handles are angled 90° from the blade so you can cut material from directly above tight spaces.
Snip tighter curves in smaller spaces than standard high-force cutters.
Make straight and curved cuts in sheet metal—these sets come with three tools for different cutting patterns. Also called aviation snips, they have a double hinge, so they cut with more force and require less effort to squeeze the handles than standard sheet metal cutters.
This cutter has two blades that cut a 1/8" wide strip—peel it back for smooth edges with little distortion.
Prevent waste from flying up as you work. A double blade makes two cuts to create a 7/64"-wide step that peels back, leaving little distortion and smooth edges.
These cutters make straight cuts and curves.
Blades are tapered to give you more control when cutting straight lines, tight curves, and circles, and they're serrated to prevent slipping. These cutters are also known as duckbill snips.
Also known as bulldog snips, these have long handles and short blades for cutting through thick sheet metal with less effort than standard sheet metal cutters.
Replace blades as they wear. These cutters are also known as tinners' snips.
Handles are angled to keep your hand away from the material as you cut straight lines and curves.
Loosen a few screws to swap dull blades with new ones. These cutters have offset handles to keep your hands clear of the metal being cut.
The unique shape of these cutters gives you 40% more power per cut than standard sheet metal cutters. When blades get dull, loosen a few screws to replace them.
Sized and shaped like pliers, these sheet metal cutters are small enough to fit in your tool belt.
Originally designed to cut rings off of fingers, these cutters slice through thin metal without damaging nearby surfaces.
S-shaped handles keep your hand clear of material, so you can cut flush against flat surfaces.
Trim solid rivets to the length you need without changing their shape.