We will reply to your message within an hour.
Connect two channels to create a stacked channel.
Serrated grooves grip the lip of the channel.
In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.
Push these nuts into place rather than threading them onto a fastener.
Keep a rod securely centered against the strut channel.
A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.
A tab fits tightly against the lip of the channel to keep these nuts from slipping.
Quickly fasten threaded rod to strut channel. Snap these hinged nuts onto a threaded rod, then slip the head through a strut channel hole.
Run wires through the hollow stud of these nuts or use them as vents.
Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.
Quickly attach these nuts by twisting them closed at any point along a threaded rod.
Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.
There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.
Keep hardware centered in the strut channel slot.
Add hardware to strut channel without having to hold the washer in place or reach inside the channel.
Use with hex nuts to connect threaded rod.
Notches on these washers grip the channel to keep them in place.
Create continuous runs of channel without corners.
Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.
Slide the strut channel into the tube for telescoping length adjustments.
Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.
Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.
For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.
This welded, one-piece strut channel combines two strut channels side-to-side.
This welded, one-piece strut channel combines two strut channels back-to-back.
Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.
Clamp panels onto strut channel to hold them in place.
Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.
These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.
Attach strut channel at any point on a threaded rod without taking apart your assembly.
Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.
Provide a stable, nonmarring base for strut channel legs.
Securely fasten strut channel to the floor.
Mount strut channel away from walls.
Roll components along strut channel hanging overhead.
Smoothly move lightweight curtains overhead along strut channel.
Brackets mount on the outside of strut channel to allow trolley movement.
Support the corners of strut channel structures.
Mount between two strut channels to create a handhold.
Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.
Create a four-sided raceway for cable, or give a more finished look to strut channel structures.
Mount to your strut channel to support rail, tube, or pipe.
Cover rough ends of strut channel.
A tab on the end of these shelf brackets fits inside the strut channel for extra stability.
Block strut channel ends to keep trolleys, slides, and other hanging components from rolling out.
Mount electrical components along your strut channel to bring power to new locations.
A flat or half-round shape keeps water from pooling on these strut rails. Unlike a traditional C-shape strut, these rails prevent the buildup of bacteria and debris, making them ideal for use in sanitary or food production environments.
Attach cable, pipe, tubing, and other items to your strut channel.
Hold two pieces of strut channel together so they can smoothly open or close.
Mount these brackets to strut channel to add stair treads. They’re also known as stringers.
Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.
For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.
Half the weight of steel, this aluminum framing resists corrosion in wet environments.
Create posts of varying lengths.